BOYA 2.4G Wireless Microphone Kit for Type-C Devices 1+2 User Manual

හැඳින්වීම

This manual provides comprehensive instructions for the setup, operation, and maintenance of your BOYA 2.4G Wireless Microphone Kit for Type-C Devices 1+2. The BY-WM4 PRO-K6 is a digital plug-in 2.4GHz wireless system designed for seamless audio recording with Android and other Type-C devices. It is ideal for live streaming, vlogging, podcasting, and various other audio capture needs.

පැකේජයේ අන්තර්ගතය

පහත ලැයිස්තුගත කර ඇති සියලුම අයිතම ඔබේ පැකේජයට ඇතුළත් කර ඇති බව කරුණාකර සත්‍යාපනය කරන්න:

• 2 x BY-WM4 PRO Transmitters (TX4 Pro)
• 1 x BY-WM4 PRO RXU Receiver (Type-C connector)
• 2 x Omnidirectional Lavalier Microphones
• Other accessories as specified in the product packaging.

Image: Complete BOYA BY-WM4 PRO-K6 Wireless Microphone Kit components.

නිෂ්පාදන විශේෂාංග

• Digital 2.4GHz Wireless System
• Compatible with Android and other Type-C devices
• Dual-channel receiver for simultaneous use of two transmitters
• Selectable Stereo and Mono modes
• 3.5mm headphone jack on receiver for real-time monitoring
• Plug-and-play operation for immediate use
• සංයුක්ත සහ සැහැල්ලු නිර්මාණය

සංරචක හඳුනාගැනීම

BY-WM4 PRO Transmitter (TX4 Pro)

රූපය: ඉදිරිපස view of the BY-WM4 PRO Transmitter.

• බල LED: Indicates power status and pairing.
• මයික්‍රෆෝන ආදානය: 3.5mm jack for lavalier microphone.
• බල සැපයුම් සුවිචය: පාලනය සක්රිය / අක්රිය.
• බැටරි මැදිරිය: Houses 2 AAA batteries.

Image: BY-WM4 PRO Transmitter with open battery compartment.

The transmitter is powered by two AAA batteries. Ensure correct polarity when inserting batteries. The Power LED will illuminate when the device is on.

BY-WM4 PRO RXU Receiver

රූපය: පැත්ත view of the BY-WM4 PRO RXU Receiver with labeled controls.

• Type-C සම්බන්ධකය: For connecting to Android phones and other compatible devices.
• පරිමාව +/- බොත්තම්: ප්රතිදාන පරිමාව සකසයි.
• යුගල බොත්තම: Initiates pairing with transmitters.
• M/S Switch: Toggles between Mono (M) and Stereo (S) output modes.
• හෙඩ්ෆෝන් ජැක් (මි.මී. 3.5): තත්‍ය කාලීන ශ්‍රව්‍ය නිරීක්ෂණය සඳහා.
• බල LED: බලය සහ සම්බන්ධතා තත්ත්වය පෙන්නුම් කරයි.
• Built-In Internal Antenna: රැහැන් රහිත සංඥා පිළිගැනීම සඳහා.

රූපය: අවසානය view of the BY-WM4 PRO RXU Receiver, showing connectivity ports.

The receiver draws power directly from the connected Type-C device. The M/S switch allows you to select the audio output mode. In Mono mode, audio from both transmitters is mixed into a single channel. In Stereo mode, each transmitter's audio is output to a separate channel (left/right).

සැලසුම

1. සම්ප්‍රේෂකවල බැටරි ස්ථාපනය කරන්න: Open the battery compartment of each BY-WM4 PRO Transmitter and insert two AAA batteries, observing the correct polarity. Close the compartment.
2. Connect Lavalier Microphones: Plug the 3.5mm connector of each lavalier microphone into the microphone input jack on the top of each transmitter.
3. Connect Receiver to Device: Plug the Type-C connector of the BY-WM4 PRO RXU Receiver directly into the Type-C port of your Android phone or other compatible recording device. Ensure it is securely seated.
4. සම්ප්‍රේෂක මත බලය: Slide the power switch on each transmitter to the "ON" position. The Power LED on the transmitter will illuminate.
5. යුගල කිරීම: The transmitters and receiver should automatically pair. If not, press the "Pair" button on the receiver. The Power LED on both the transmitter and receiver will indicate a successful connection (e.g., solid blue light).
6. ප්‍රතිදාන මාදිලිය තෝරන්න: Use the M/S switch on the receiver to select your desired audio output mode (Mono or Stereo).
7. හෙඩ්ෆෝන් සම්බන්ධ කරන්න (විකල්ප): For real-time audio monitoring, plug 3.5mm headphones into the headphone jack on the receiver.
8. පරිමාව සකසන්න: Use the Volume +/- buttons on the receiver to adjust the output audio level as needed.

රූපය: උදාample setup of the BOYA BY-WM4 PRO-K6 with a smartphone.

මෙහෙයුම් උපදෙස්

Once the system is set up and paired, you can begin recording audio. The BY-WM4 PRO-K6 is designed for plug-and-play operation with most compatible devices.

• පටිගත කිරීම: Open your preferred audio or video recording application on your Type-C device. The system should be recognized as an external microphone.
• අධීක්ෂණය: Use headphones connected to the receiver's 3.5mm jack to monitor the audio in real-time. This helps ensure optimal sound quality and proper microphone placement.
• ශබ්ද පාලනය: Adjust the output volume using the +/- buttons on the receiver. This controls the level sent to your recording device.
• මාදිලිය තේරීම: Switch between Mono and Stereo modes using the M/S switch on the receiver based on your recording needs. Mono is suitable for single-person interviews or when you want both microphones mixed. Stereo is useful for separating two audio sources.
• මයික්‍රෆෝනය ස්ථානගත කිරීම: For best audio quality, clip the lavalier microphone approximately 6-8 inches (15-20 cm) from the speaker's mouth, ideally on clothing.

නඩත්තු කිරීම

• පිරිසිදු කිරීම: Use a soft, dry cloth to clean the exterior of the transmitters and receiver. Do not use liquid cleaners or solvents.
• බැටරි ආදේශනය: Replace AAA batteries in the transmitters when the Power LED indicates low power or when audio quality degrades. Always use fresh batteries.
• ගබඩා: When not in use for extended periods, remove batteries from the transmitters to prevent leakage. Store the kit in a cool, dry place away from direct sunlight and extreme temperatures.
• කේබල් රැකවරණය: Avoid sharp bends or kinks in the lavalier microphone cables to prevent internal damage.

දෝෂගවේෂණය

පිරිවිතර

වගකීම් සහ සහාය

For warranty information and technical support, please refer to the official BOYA webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සේවයට සෘජුවම සම්බන්ධ වන්න. වගකීම් හිමිකම් සඳහා මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

BOYA Official Webඅඩවිය: www.boya-mic.com