හැඳින්වීම
Thank you for choosing the Ferrex GT-BWC-01 Irrigation Computer. This device is designed to automate your garden watering, ensuring efficient and precise irrigation. It features adjustable watering intervals, a rain sensor, and is suitable for common tap connections. Please read this manual carefully before installation and operation to ensure proper use and longevity of the product.
ආරක්ෂිත උපදෙස්
- මෙම උපාංගය එළිමහන් භාවිතය සඳහා පමණක් අදහස් කෙරේ.
- Ensure the tap connection is secure to prevent leaks.
- Do not immerse the device in water. It is splash-proof (IPX4), but not waterproof.
- Use only the specified battery type (2 x 1.5V AA). Do not mix old and new batteries or different battery types.
- දරුවන්ට ළඟා විය නොහැකි ලෙස තබා ගන්න.
- ඒකකය ඔබම විසුරුවා හැරීමට හෝ අලුත්වැඩියා කිරීමට උත්සාහ නොකරන්න. සේවාව සඳහා සුදුසුකම් ලත් පුද්ගලයින් අමතන්න.
- Protect the device from frost during winter months by disconnecting it from the tap and storing it indoors.
පැකේජයේ අන්තර්ගතය
කරුණාකර සියලුම අයිතම පැකේජයේ තිබේදැයි පරීක්ෂා කරන්න:
- Ferrex GT-BWC-01 Irrigation Computer
- Rain Sensor with approximately 5m cable
- System adapter (1/2")
- Adapter with 26.5 mm (G3/4") thread
- පරිශීලක අත්පොත
නිෂ්පාදන විශේෂාංග
- Compatible with common taps with 33.3 mm (G1") thread. Includes adapters for 26.5 mm (G3/4") and 1/2" connections.
- Adjustable for up to 4 separate irrigation intervals per day.
- Freely selectable irrigation days.
- Manual water extraction function with a single button press.
- Splash-proof housing (IPX4) for outdoor durability.
- Adjustable irrigation time from approximately 1 to 240 minutes.
- Wired rain sensor (approx. 5m cable) to interrupt watering during rainfall.
- මෙහෙයුම් වෙළුමtage: 3V (2 x 1.5V AA batteries).
- Operating pressure: Maximum 6 bar.
සැකසුම සහ ස්ථාපනය
1. බැටරි ස්ථාපනය
- Open the battery compartment on the back of the irrigation computer.
- නිවැරදි ධ්රැවීයතාව (+/-) සහතික කරමින් 1.5V AA බැටරි දෙකක් ඇතුළු කරන්න.
- Close the battery compartment securely to maintain splash protection.
2. Connecting to the Tap
- Ensure your tap has a G1" (33.3 mm) thread. If not, use the provided G3/4" (26.5 mm) or 1/2" adapter.
- Screw the irrigation computer firmly onto the tap. Hand-tighten only; do not overtighten.
- Connect your garden hose or irrigation system to the outlet of the irrigation computer.
3. Connecting the Rain Sensor
- Plug the rain sensor cable into the designated port on the side of the irrigation computer.
- Place the rain sensor in an open area where it can accurately detect rainfall, away from direct spray from sprinklers.
- The rain sensor will automatically interrupt watering cycles when sufficient rain is detected.

Image: The Ferrex GT-BWC-01 Irrigation Computer connected to a tap, with the rain sensor positioned nearby. The display shows various settings.
මෙහෙයුම් උපදෙස්
The irrigation computer features an LCD display and several buttons for navigation and setting adjustments.
ප්රදර්ශනය අවසන්view (Refer to product image for visual reference)
- Uhrzeit (Time): වත්මන් කාලය පෙන්වයි.
- වොචෙන්tag Bewässerungstag (Weekday Irrigation Day): Shows current day and selected irrigation days (SU MO TU WE TH FR SA).
- Zyklus (Cycle): Indicates the current watering cycle (1, 2, 3, 4).
- Startzeit (Start Time): Displays the programmed start time for a cycle.
- Zeitdauer (Duration): Shows the programmed watering duration in minutes.
- Sparfunktion (Special Function): Displays settings for water-saving features (e.g., WATER 4 MIN PAUSE 2 MIN).
- Programmwahl (Program Selection): Indicates the current program mode (e.g., AUTO).
බොත්තම් කාර්යයන්
- හරි බොත්තම: තේරීම් තහවුරු කර ඊළඟ සැකසුම වෙත මාරු කරයි.
- Up/Down Buttons (+/-): Adjust values or navigate through options.
- Manual Watering Button (Tap icon): Initiates or stops manual watering.
Programming the Irrigation Computer
Follow these steps to program your desired watering schedule:
- වත්මන් වේලාව සකසන්න: Press the OK button until 'Uhrzeit' (Time) is highlighted. Use the +/- buttons to set the current hour and minute, then press OK to confirm.
- Set Current Day and Irrigation Days: Navigate to 'Wochentag Bewässerungstag'. Use +/- to select the current day. Then, select the days you wish to water. Press OK to confirm each selection.
- Select Watering Cycle: Go to 'Zyklus'. You can program up to 4 independent watering cycles (1, 2, 3, 4). Select a cycle to program.
- ආරම්භක වේලාව සකසන්න: For the selected cycle, navigate to 'Startzeit'. Use +/- to set the desired start time for watering. Press OK.
- ජලය දැමීමේ කාලය සකසන්න: Navigate to 'Zeitdauer'. Use +/- to set the watering duration from 1 to 240 minutes. Press OK.
- Configure Special Function (Sparfunktion): If available, adjust water-saving settings. For example, 'WATER 4 MIN PAUSE 2 MIN' might mean 4 minutes of watering followed by a 2-minute pause, repeated.
- Select Program Mode: Ensure 'Programmwahl' is set to 'AUTO' for automatic operation based on your programmed schedule.
අතින් ජලය දැමීම
To manually water, press the button with the tap icon. Press it again to stop manual watering. This function does not affect the programmed schedule.
නඩත්තු කිරීම
- බැටරි ආදේශනය: Replace batteries when the low battery indicator appears on the display or if the device stops functioning. Always replace both batteries simultaneously.
- පිරිසිදු කිරීම: දැන්වීම සමඟ උපාංගයේ බාහිර කොටස පිරිසිදු කරන්නamp cloth. Do not use abrasive cleaners or solvents. Ensure the rain sensor is free of debris for accurate operation.
- ශීත ගබඩා: Before the first frost, disconnect the irrigation computer from the tap, remove the batteries, and store the unit and rain sensor in a dry, frost-free location.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| උපාංගය ක්රියාත්මක නොවේ. | බැටරි අක්රිය වී හෝ වැරදි ලෙස ඇතුළත් කර ඇත. | නිවැරදි ධ්රැවීයතාව සහතික කරමින් බැටරි ප්රතිස්ථාපනය කරන්න. |
| ජල ප්රවාහයක් නොමැත. | Tap is closed; low water pressure; program not set; rain sensor active. | Open the tap fully; check water supply; ensure program is active (AUTO); check rain sensor for accumulated water. |
| සම්බන්ධතාවයෙන් ජලය කාන්දු වේ. | Connection not tight enough; missing or damaged washer. | Ensure connection is hand-tight; check and replace washer if necessary. |
| Rain sensor not working. | Sensor port dirty; sensor placed incorrectly; cable damaged. | Clean sensor and port; reposition sensor; check cable for damage. |
පිරිවිතර
- ආකෘතිය: GT-BWC-01
- මෙහෙයුම් වෙළුමtage: 3 V (2 x 1.5 V AA batteries)
- වත්මන් පරිභෝජනය: 300 mA
- මෙහෙයුම් පීඩනය: උපරිම. 6 බාර්
- Tap Connection: G1" (33.3 mm) with G3/4" (26.5 mm) and 1/2" adapters
- ජලය දැමීමේ කාලය: ආසන්න වශයෙන්. 1 - 240 විනාඩි
- ජලය දැමීමේ කාල පරතරයන්: Up to 4 per day
- ආරක්ෂණ පන්තිය: IPX4 (splash-proof)
- Rain Sensor Cable Length: ආසන්න වශයෙන්. මීටර් 5
- ද්රව්ය: ප්ලාස්ටික්
- සංදර්ශක වර්ගය: LCD
- මානයන් (පැකේජය): 19.99 x 16 x 11 සෙ.මී
- බර (පැකේජය): 712 ග්රෑම්
වගකීම් සහ සහාය
This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or contact your retailer. For technical support or inquiries, please contact Ferrex customer service through the contact information provided with your purchase documentation.