Nerf TURBINE CS-18

Nerf Elite 2.0 Turbine CS-18 Motorized Blaster

උපදෙස් අත්පොත

හැඳින්වීම

Thank you for choosing the Nerf Elite 2.0 Turbine CS-18 Motorized Blaster. This manual provides essential information for the safe and effective operation, setup, and maintenance of your blaster. Please read all instructions carefully before use.

Nerf Elite 2.0 Turbine CS-18 Motorized Blaster with 36 darts and 18-dart clip

Image: The Nerf Elite 2.0 Turbine CS-18 blaster, featuring its blue and orange design, an attached 18-dart clip, and 36 loose Elite darts.

ආරක්ෂිත තොරතුරු

අවවාදයයි: To avoid eye injury, do not aim at eyes or face. The use of eyewear is recommended for players and people within range. Use only official Nerf darts. Other darts may not meet safety standards. Do not modify darts or blaster.

අවවාදයයි: හුස්ම හිරවීම – Small parts may be generated. Not for children under 3 years.

වයස අවුරුදු 8 සහ ඊට වැඩි අය සඳහා නිර්දේශ කෙරේ.

පෙට්ටියේ ඇති දේ

සැලසුම

1. බැටරි ස්ථාපනය

The Nerf Elite 2.0 Turbine CS-18 Blaster requires 4 x 1.5V C alkaline batteries (not included). To install batteries:

  1. Locate the battery compartment on the blaster.
  2. පිලිප්ස් හිස් ඉස්කුරුප්පු නියනක් (ඇතුළත් කර නැත) භාවිතා කරමින්, බැටරි මැදිරි කවරය ගලවන්න.
  3. Insert 4 C alkaline batteries, ensuring correct polarity (+/-).
  4. බැටරි මැදිරි කවරය ප්රතිස්ථාපනය කර එය ඉස්කුරුප්පු ඇණ සමඟ සවි කරන්න.
Battery icon showing 4 C/LR14 1.5V batteries required

Image: An illustration indicating the requirement for 4 x 1.5V C/LR14 batteries for the blaster.

2. Dart Loading

The blaster comes with an 18-dart clip and 36 Official Nerf Elite darts. Load 18 darts into the clip and keep the remaining 18 for quick reloads.

  1. Hold the 18-dart clip with the open end facing upwards.
  2. Insert darts one by one into the clip until it is full (18 darts). Ensure darts are inserted fully and correctly.
  3. Align the loaded clip with the blaster's magazine well and push it firmly upwards until it clicks into place.
Hand loading a Nerf dart into an orange 18-dart clip

Image: A hand demonstrating the process of loading a single Nerf dart into the top of an 18-dart clip.

Close-up of an 18-dart clip with a dart icon indicating capacity

රූපය: සවිස්තරාත්මක view of the 18-dart clip, highlighting its capacity with an '18X' dart icon.

Operating the Blaster

1. Powering On and Firing

The Nerf Elite 2.0 Turbine CS-18 is a motorized blaster designed for rapid-fire action.

  1. Ensure the 18-dart clip is securely inserted into the blaster.
  2. Hold down the acceleration button (located below the main trigger) to power up the motor. You will hear the motor whirring.
  3. While holding the acceleration button, press the main trigger to launch darts. For rapid-fire, continue holding both buttons.
Person holding the Nerf Elite 2.0 Turbine CS-18 blaster in a firing stance

Image: A person wearing safety glasses, holding the Nerf Elite 2.0 Turbine CS-18 blaster in a ready-to-fire position.

2. අභිරුචිකරණ විශේෂාංග

The Turbine CS-18 blaster is equipped with 4 tactical rails and a barrel attachment point, allowing for customization with compatible Nerf accessories (sold separately).

නඩත්තු කිරීම

1 පිරිසිදු කිරීම

To keep your blaster in optimal condition:

2. Dart Care

To ensure consistent performance, inspect darts regularly:

දෝෂගවේෂණය

පිරිවිතර

නිෂ්පාදන මානයන්අඟල් 2.62 x 22.5 x 9.75
අයිතමයේ බරරාත්තල් 1.1 කි
ආදර්ශ අංකයE9481F03 (TURBINE CS-18)
අවශ්‍ය බැටරි4 C බැටරි (ඇතුළත් කර නැත)
නිර්දේශිත වයසඅවුරුදු 8 - 8
Dart Capacity18 darts per clip
Max Firing Distanceඅඩි 90 (මීටර් 27) දක්වා

වගකීම් සහ සහාය

For warranty information, product support, or to purchase additional accessories and darts, please visit the official Nerf webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුව අමතන්න. ඕනෑම වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

අදාළ ලියකියවිලි - TURBINE CS-18

පෙරview NERF ULTRA DORADO Blaster: උපදෙස් සහ ආරක්ෂණ මාර්ගෝපදේශය
NERF ULTRA DORADO බ්ලාස්ටරය සඳහා නිල උපදෙස්, පැටවීම, වෙඩි තැබීම, ආරක්ෂක අනතුරු ඇඟවීම් සහ දෝශ නිරාකරණය ඇතුළුව. ඔබේ NERF ULTRA DORADO ආරක්ෂිතව සහ ඵලදායී ලෙස භාවිතා කරන්නේ කෙසේදැයි ඉගෙන ගන්න.
පෙරview නර්ෆ් ඇල්ෆා ට්‍රොපර් CS-18 ප්ලන්ගර් ආදේශන මාර්ගෝපදේශය
Nerf Alpha Trooper CS-18 dart blaster එකක plunger එක ප්‍රතිස්ථාපනය කරන්නේ කෙසේද යන්න පිළිබඳව iFixit වෙතින් පියවරෙන් පියවර මාර්ගෝපදේශයක්. අවශ්‍ය මෙවලම් සහ සවිස්තරාත්මක විසුරුවා හැරීමේ උපදෙස් ඇතුළත් වේ.
පෙරview Nerf Roblox Arsenal Pulse Laser Blaster උපදෙස්
නර්ෆ් රොබ්ලොක්ස් ආර්සෙනල් ස්පන්දන ලේසර් යතුරුපැදි ඩාර්ට් බ්ලාස්ටර් සඳහා ක්‍රියාත්මක කිරීම, පැටවීම, ගිනි තැබීම සහ තදබදය ඉවත් කිරීම පිළිබඳ පුළුල් මාර්ගෝපදේශය. ආරක්ෂක අනතුරු ඇඟවීම් සහ බැටරි තොරතුරු ඇතුළත් වේ.
පෙරview නර්ෆ් අල්ට්‍රා වන් බ්ලාස්ටර්: එකලස් කිරීම, පැටවීම සහ වෙඩි තැබීමේ උපදෙස්
වැදගත් ආරක්ෂක තොරතුරු සහ දෝශ නිරාකරණ උපදෙස් ඇතුළුව, Nerf Ultra One Motorized Blaster එකලස් කිරීම, පැටවීම සහ ක්‍රියාත්මක කිරීම සඳහා පුළුල් මාර්ගෝපදේශයකි.
පෙරview Nerf N-Strike Elite Strongarm Blaster: පරිශීලක මාර්ගෝපදේශය
Nerf N-Strike Elite Strongarm සෙල්ලම් බ්ලාස්ටර් සඳහා නිල උපදෙස්. ඩාර්ට්ස් පූරණය කරන ආකාරය, තනි වෙඩි තැබීම් කරන ආකාරය සහ වේගවත් වෙඩි තැබීම සඳහා slam-fire විශේෂාංගය භාවිතා කරන ආකාරය ඉගෙන ගන්න. ආරක්ෂක අනතුරු ඇඟවීම් සහ නිෂ්පාදන විස්තර ඇතුළත් වේ.
පෙරview Nerf Hyper MACH-100 Blaster: මෙහෙයුම් සහ ආරක්ෂක උපදෙස්
Nerf Hyper MACH-100 බ්ලාස්ටරය සඳහා සවිස්තරාත්මක මාර්ගෝපදේශය, එය පූරණය කරන ආකාරය, ගිනි තබන ආකාරය, තදබදය ඉවත් කරන ආකාරය, බ්ලාස්ටරය ගබඩා කරන ආකාරය සහ වැදගත් ආරක්ෂක පූර්වාරක්ෂාවන් විස්තර කරයි. බැටරි තොරතුරු සහ නිෂ්පාදන අනුකූලතාව ඇතුළත් වේ.