WOODBRIDGE 67" Freestanding Acrylic Soaking Bathtub (Model BTA1813) Instruction Manual

හැඳින්වීම

This manual provides detailed instructions for the safe installation, operation, and maintenance of your WOODBRIDGE 67" Freestanding Acrylic Soaking Bathtub, Model BTA1813. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of your product. Retain this manual for future reference.

වැදගත් ආරක්ෂක තොරතුරු

• Installation must be performed by a certified professional to ensure compliance with local plumbing and building codes.
• ස්ථාපනය අතරතුර සෑම විටම සුදුසු පුද්ගලික ආරක්ෂක උපකරණ (PPE) පළඳින්න.
• Ensure the floor structure can support the weight of the bathtub when filled with water and a person.
• Do not use abrasive cleaners or harsh chemicals on the bathtub surface, as this may damage the finish.
• Avoid dropping heavy or sharp objects into the tub to prevent chipping or cracking.
• This bathtub is designed for soaking. Do not use it for purposes other than intended.

පැකේජයේ අන්තර්ගතය

ස්ථාපනය සමඟ ඉදිරියට යාමට පෙර සියලුම සංරචක පවතින බවත් හානි වී නොමැති බවත් තහවුරු කර ගන්න.

• WOODBRIDGE 67" Freestanding Acrylic Bathtub (Model BTA1813)
• Solid brass Matte Black drain
• Stainless steel Matte Black overflow
• User & Instruction Manual

රූපය: සමීප රූපය view of the included Matte Black overflow and drain components.

පිරිවිතර

Image: Detailed dimensions and water depth for the WOODBRIDGE BTA1813 bathtub.

Image: Certifications for WOODBRIDGE freestanding bathtubs, including compliance with UPC, IPC, IRC, CSA, and IAPMO standards.

සැකසුම සහ ස්ථාපනය

It is highly recommended that installation be performed by a qualified professional. Refer to the installation video for a visual guide.

පියවරෙන් පියවර ස්ථාපනය:

1. ප්රදේශය සකස් කරන්න: Ensure the installation area is clean, level, and has adequate structural support for the filled tub. Mark the desired finished location of the tub on the floor with an erasable pencil.
2. Install Overflow Trim: Apply clear silicone caulking to the tub overflow trim piece. Hold it in place and confirm it is inserted flat and appears level from all angles. Secure with blue painter's tape until cured (approx. 24 hours).
3. කාණු එකලස් කිරීම ස්ථාපනය කරන්න: Fill the grooved gasket with silicone and install it with the groove and silicone facing up. Tighten the drain nut in place, being careful not to overtighten; it only needs to be snug.
4. Level the Bathtub: Carefully turn the tub upside down on a protective surface. Use a 24" level to adjust the legs, leaving a 1/8" to 1/4" gap between the rim of the tub and the level. Loosen the nuts to adjust legs down, and tighten to secure.
5. Connect to Floor Drain:
   • Plan A: Installation with Underfloor Access: Attach your flanged tail piece (provided by installer) to the tub drain and tighten. Connect this to the floor drain pipe.
   • Plan B: Installation on Slab Floor (No Underfloor Access): Attach your flanged tail piece (provided by installer) to the tub drain and tighten. Connect this to the floor drain pipe.
6. කාන්දු පරීක්ෂණය: Push the pop-up drain into a closed position. Fill the bathtub with cold water above the overflow level. Check for any leaks around the drain and pipe connections.
7. Final Placement and Sealing: Once leak-free, apply silicone caulking to the base rim of the tub and carefully lower the tub into its final position, aligning with the marked outline.

Image: Comparison of WOODBRIDGE's sealed drain system, designed to prevent leaks, versus exposed drain systems.

මෙහෙයුම් උපදෙස්

Using your WOODBRIDGE freestanding bathtub is straightforward:

1. ටබ් පිරවීම: Ensure the drain is closed. Turn on the water faucet to fill the tub to your desired level. The overflow will prevent overfilling.
2. Draining the Tub: To drain the tub, open the pop-up drain.

Image: The WOODBRIDGE BTA1813 bathtub filled with water, showcasing its depth and design.

නඩත්තු කිරීම සහ රැකවරණය

Proper care will maintain the beauty and longevity of your WOODBRIDGE bathtub.

• පිරිසිදු කිරීම: The tub features an EnduraClean, stain-resistant, and scratch-resistant surface. Clean regularly with a soft cloth and non-abrasive, mild liquid detergent. Avoid harsh chemicals, abrasive pads, or scouring powders.
• ලිස්සා නොයන පතුල: The non-slip design bottom provides added safety. Clean this area gently to maintain its texture.
• ද්‍රව්‍යමය වාසි: Made from genuine Lucite acrylic, the tub is non-porous, making it easy to clean and resistant to bacteria growth. It also retains warmth longer.

Image: The non-slip textured bottom of the bathtub, designed for added safety.

Image: The easy-to-clean surface of the WOODBRIDGE Lucite acrylic bathtub.

දෝෂගවේෂණය

වගකීම් සහ සහාය

WOODBRIDGE warrants a අවුරුදු 1 ක සීමිත වගකීමක් to be free of defects in material and workmanship. For any sales or product-oriented queries, our US-based product support team is available to assist you.

සහාය සඳහා, කරුණාකර පිවිසෙන්න Amazon හි WOODBRIDGE වෙළඳසැල නැතහොත් ඔබේ නිෂ්පාදන ඇසුරුම්වල සපයා ඇති සම්බන්ධතා තොරතුරු වෙත යොමු වන්න.

Image: Illustration emphasizing the leak-proof design of the WOODBRIDGE drain system.