1. හැඳින්වීම
The TRENDnet TC-NTP1 Inline PoE Tester is a compact tool designed for network professionals. It provides accurate testing for various Power over Ethernet (PoE) technologies, including 4PPoE, PoE+, PoE, and passive PoE. This device operates inline between a PoE source (PSE) and a PoE device (PD), offering real-time data on wattage, voltagඊ, සහ amperage. It is compatible with IEEE 802.3af/at/bt PoE devices up to 100W and non-standard passive PoE devices ranging from 11V to 60V.
2 ප්රධාන ලක්ෂණ
- PoE Technology Support: Tests 4PPoE, PoE+, PoE, and passive PoE.
- තත්ය කාලීන අධීක්ෂණය: වොට් පෙන්වයිtage, voltagඊ, සහ amperage of the connected PoE device.
- Multiple Testing Modes: Includes T-mode for PSE device testing, N-mode for non-standard passive PoE, and I-mode for inline PoE testing.
- පරිශීලක හිතකාමී මෙහෙයුම: Battery-free design for immediate use.
- ගැළපුම: Supports IEEE 802.3af/at/bt PoE devices up to 100W and passive PoE from 11V – 60V.
- Step Button Functionality: Allows cycling through and locking display readouts for voltage, amperage, සහ වොට්tage.
- ගිගාබිට් වරායන්: Equipped with one Gigabit port for PSE connection and one Gigabit port for PoE device connection.
- NDAA Compliant: Suitable for government networking solutions (U.S. and Canada Only).
3. පැකේජ අන්තර්ගතය
- TRENDnet TC-NTP1 Inline PoE Tester
- ඉක්මන් ස්ථාපන මාර්ගෝපදේශය
4. නිෂ්පාදන අවසන්view
රූපය 4.1: කෝණික view of the TRENDnet TC-NTP1 Inline PoE Tester, showing the display and ports.
රූපය 4.2: ඉහළ view of the TC-NTP1, highlighting the LED display for Mode A (End-span) and Mode B (Mid-span) and the 'STEP' button.
රූපය 4.3: ඉදිරිපස view of the TC-NTP1, showing the PSE (Power Sourcing Equipment) Gigabit Ethernet port.
රූපය 4.4: පහළ view of the TC-NTP1, showing the product information label.
5. පිහිටුවීම
- Ensure the TC-NTP1 is free from any physical damage.
- The device is battery-free and ready for use upon connection. No external power source is required for its operation.
- Identify the Power Sourcing Equipment (PSE) and the Powered Device (PD) in your network setup.
6. මෙහෙයුම් උපදෙස්
6.1. Connecting the Tester
- Connect the Ethernet cable from your PoE source (e.g., PoE switch or injector) to the PSE port on the TC-NTP1.
- වෙතින් ඊතර්නෙට් කේබලයක් සම්බන්ධ කරන්න PD port on the TC-NTP1 to your PoE device (e.g., IP camera, access point).
- The TC-NTP1 will automatically power on and begin displaying information.
6.2. Testing Modes
The TC-NTP1 offers three distinct testing functions:
- T-mode (PSE Device Testing): This mode is used to determine the PoE type and voltage output of your Power Sourcing Equipment (PSE), such as a PoE switch or injector. Connect the PSE directly to the tester's PSE port.
- N-mode (Non-Standard Passive PoE Devices): Designed for testing non-standard passive PoE devices. This mode supports devices with voltage 11V සිට 60V දක්වා පරාසයක පවතී.
- I-mode (PoE Inline Testing): For real-time monitoring, connect the tester inline between the PSE and the Powered Device (PD). This mode displays the voltage, amperage, සහ වොට්tage being delivered to the connected PD.
6.3. Using the Step Button
ද පියවර button on the TC-NTP1 allows you to cycle through the displayed readouts (voltage, amperage, සහ වොට්tage). Pressing the button repeatedly will switch between these values. You can also press and hold the button to lock the display on a specific readout for continuous monitoring.
7. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| ආදර්ශ අංකය | TC-NTP1 |
| වෙළඳ නාමය | TRENDnet |
| PoE ප්රමිති | IEEE 802.3af, 802.3at, 802.3bt |
| Supported PoE Types | 4PPoE, PoE+, PoE, Passive PoE |
| උපරිම බල ප්රතිදානය | 100W දක්වා |
| උදාසීන PoE වෙළුමtagඊ පරාසය | 11V - 60V |
| වරායන් | 1 x Gigabit PSE, 1 x Gigabit PD |
| ප්රදර්ශනය කරන්න | LED (Wattage, Voltage, Amperage, Polarity) |
| බලශක්ති ප්රභවය | Battery-Free (Powered by PoE) |
| මානයන් (L x W x H) | 3.9 x 1.4 x 1 අඟල් (99 x 36 x 25 මි.මී.) |
| බර | අවුන්ස 2.82 (කිලෝ 0.08) |
| මෙහෙයුම් උෂ්ණත්වය | 32°F සිට 122°F (0°C සිට 50°C) |
| සහතික | CE, FCC |
8. දෝශ නිරාකරණය
- සංදර්ශකය/බලය නැත: Ensure the PoE source is active and providing power. The TC-NTP1 is battery-free and draws power from the PoE connection. Verify the Ethernet cables are properly connected and functional.
- වැරදි කියවීම්: Double-check that the cables are securely connected to the correct PSE and PD ports. Ensure the PoE source and device are compatible with the tester's supported standards.
- Device Not Powering On (PD): If the PoE device connected to the PD port is not powering on, use T-mode to test the PSE directly to confirm it is supplying power correctly. Then, use I-mode to check the inline power delivery.
- Polarity Issues: The tester indicates polarity. If a "REV" (Reverse Polarity) LED illuminates, there may be an issue with the PoE source or cabling.
9. නඩත්තු කිරීම
- පිරිසිදු කිරීම: උපාංගය පිරිසිදු කිරීම සඳහා මෘදු වියළි රෙද්දක් භාවිතා කරන්න. දියර හෝ එයරෙසෝල් පිරිසිදු කරන්නන් භාවිතා නොකරන්න.
- ගබඩා: උපාංගය සෘජු හිරු එළියෙන් සහ අධික උෂ්ණත්වයන්ගෙන් ඈත්ව සිසිල් වියළි ස්ථානයක ගබඩා කරන්න.
- හැසිරවීම: Handle the device with care to prevent physical damage to the ports or internal components.
10. වගකීම් සහ සහාය
The TRENDnet TC-NTP1 Inline PoE Tester is backed by a 2-year TRENDnet Manufacturer Protection from the date of purchase. For technical assistance or warranty claims, please contact TRENDnet's customer support.
TRENDnet provides reliable technical support with English-speaking advisors and experts available during normal business hours. For support, visit the official TRENDnet website or refer to the contact information provided in the Quick Installation Guide.
වැඩි විස්තර සඳහා පිවිසෙන්න TRENDnet Store on Amazon.
