1. හැඳින්වීම
This manual provides essential information for the proper setup, operation, and maintenance of your Bingfu Handheld Marine VHF Radio Antenna. Please read these instructions carefully before use to ensure optimal performance and longevity of your product. This antenna is designed for use with handheld marine VHF two-way radios operating within the 136-174MHz frequency range.
2. නිෂ්පාදන අවසන්view
The Bingfu Handheld Marine VHF Radio Antenna is a durable and flexible "rubber duck" style antenna featuring an SMA Male connector. It is designed for omni-directional signal reception and transmission, enhancing the communication capabilities of compatible marine VHF radios.
රූපය 2.1: The antenna's flexible design allows for durability and resistance to bending.
වීඩියෝ 2.1: Demonstration of the antenna's flexibility and SMA Male connector type.
3. පිරිවිතර
| සංඛ්යාත පරාසය | VHF 136-174MHz |
| වීඑස්ඩබ්ලිව්ආර් | < 2.0 |
| සම්බාධනය | 50 ඕම් |
| දිශාව | ඔම්නි-දිශානුගත |
| ඇන්ටෙනා සම්බන්ධකය | SMA පිරිමි |
| ඇන්ටෙනා උස | 15 cm (අඟල් 6) |
| ශුද්ධ බර | 60g (per antenna) |
| මෙහෙයුම් උෂ්ණත්වය | -20°C ~ +80°C |
| ගබඩා උෂ්ණත්වය | -30°C ~ +85°C |
| ගැළපෙන රේඩියෝ | Standard Horizon HX210, HX870, HX890, HX300, HX380, HX40, HX280, HX290, HX370; Uniden MHS75 Handheld Floating VHF Radio |
රූපය 3.1: The antenna measures approximately 15 cm (6 inches) in length.
4. සැකසුම් උපදෙස්
Follow these steps to properly attach the antenna to your compatible handheld marine VHF radio:
- Identify Connector Types: Ensure your radio has an SMA Female connector and the antenna has an SMA Male connector.
- Align Connectors: Carefully align the SMA Male connector of the antenna with the SMA Female connector on your radio.
- ඇන්ටෙනාවේ ඉස්කුරුප්පුව: Gently screw the antenna onto the radio's connector in a clockwise direction. Do not overtighten, as this can damage both the antenna and the radio's connector. Tighten until snug.
- ආරක්ෂිත ගැළපීම සඳහා පරීක්ෂා කරන්න: Verify that the antenna is securely attached and there is no wobble.
- Optional Gasket: If provided, ensure any rubber gasket or O-ring is properly seated to maintain water resistance, especially for marine radios.
රූපය 4.1: Proper connection of the SMA Male antenna to an SMA Female radio port.
වීඩියෝ 4.1: Visual guide on how to connect an SMA Male antenna to a radio with an SMA Female connector.
5. මෙහෙයුම් උපදෙස්
Once the antenna is securely attached, your radio is ready for operation. The antenna is omni-directional, meaning it receives and transmits signals from all directions. For optimal performance, ensure the antenna is positioned vertically and unobstructed.
- ගුවන් විදුලි බලය: Turn on your handheld marine VHF radio.
- නාලිකා තේරීම: Select the desired VHF channel according to marine communication regulations.
- සම්ප්රේෂණය: When transmitting, hold the radio with the antenna as vertical as possible. Avoid touching the antenna during transmission to prevent signal degradation.
- පිළිගැනීම: The antenna will receive signals from all directions. For best reception, maintain a clear line of sight if possible.
6. නඩත්තු කිරීම
Proper maintenance ensures the longevity and performance of your antenna:
- පිරිසිදු කිරීම: Clean the antenna periodically with a soft, damp රෙදි. සැර රසායනික ද්රව්ය හෝ උල්ෙල්ඛ ද්රව්ය වලින් වළකින්න.
- පරීක්ෂාව: Regularly inspect the antenna for any signs of damage, such as cracks in the rubber or corrosion on the connector.
- සම්බන්ධක රැකවරණය: Keep the SMA Male connector clean and dry. If used in marine environments, consider applying a small amount of dielectric grease to the threads to prevent corrosion.
- ගබඩා: When not in use for extended periods, store the antenna in a cool, dry place away from direct sunlight and extreme temperatures.
7. දෝශ නිරාකරණය
If you experience issues with your antenna, consider the following common solutions:
- දුර්වල සංඥා පිළිගැනීම/සම්ප්රේෂණය:
- ඇන්ටනාව රේඩියෝවට ආරක්ෂිතව සවි කර ඇති බවට වග බලා ගන්න.
- Verify the antenna is compatible with your radio's frequency band (VHF 136-174MHz).
- Check for any physical damage to the antenna or its connector.
- Ensure there are no obstructions blocking the antenna's signal path.
- Test the radio with a known working antenna to isolate the issue.
- Antenna Not Fitting Securely:
- Confirm that your radio has an SMA Female connector. This antenna is SMA Male.
- Inspect the threads on both the antenna and the radio for damage or debris.
8. වගකීම් සහ සහාය
වගකීම් තොරතුරු හෝ තාක්ෂණික සහාය සඳහා, කරුණාකර නිෂ්පාදකයාගේ නිලධාරියා වෙත යොමු වන්න. webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔවුන්ගේ පාරිභෝගික සේවය කෙලින්ම අමතන්න. මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.
Manufacturer: BINGFU
Model: BFN00506
