1. හැඳින්වීම
Image: The Festool Rotex RO 125 FEQ-Plus Random Orbital Sander, accompanied by its Systainer storage case, detachable power cord, a sanding pad, and an edge protector, laid out on a white surface.
The Festool Rotex RO 125 FEQ-Plus Random Orbital Sander is designed for both rapid material removal and fine finishing. It offers dual-mode sanding, allowing users to switch between aggressive rotary random orbital motion for coarse sanding and polishing, and random orbital motion for fine sanding. This compact 5-inch sander is ideal for various tasks, providing powerful performance in a lightweight and maneuverable package. Its integrated Jet Stream dust extraction system ensures a cleaner workspace and extends abrasive life. The removable edge protector allows for precise sanding near adjacent surfaces without causing damage.
2. පිහිටුවීම
2.1 ඉවත් කිරීම සහ පරීක්ෂා කිරීම
Carefully remove all components from the Systainer3. Inspect the sander and accessories for any signs of damage during transit. Ensure all included components are present:
- සැන්ඩර්
- StickFix Sanding Pad
- Edge Protector
- 1 Abrasive Sheet
- Plug-It Cord
- Systainer3 (storage case)
2.2 විදුලි රැහැන සම්බන්ධ කිරීම
The Festool Rotex RO 125 FEQ-Plus utilizes a detachable Plug-It Cord. Align the Plug-It Cord connector with the port on the sander and push firmly until it clicks into place. Ensure a secure connection before plugging the cord into a power outlet.
2.3 Attaching the Sanding Pad and Abrasive
- සෑන්ඩර් එක පේනුවෙන් ඉවත් කර ඇති බවට වග බලා ගන්න.
- Align the StickFix Sanding Pad with the base of the sander and press firmly to secure it. The FastFix system allows for tool-free pad changes.
- Attach the abrasive sheet to the StickFix Sanding Pad. The hook-and-loop design ensures easy and secure attachment.
2.4 Attaching the Edge Protector
For sanding close to edges or adjacent surfaces, attach the removable edge protector to prevent damage to both the workpiece and the sander.
3. මෙහෙයුම් උපදෙස්
3.1 Dual-Mode Sanding
The Rotex RO 125 FEQ-Plus features two primary sanding modes:
- Rotary Random Orbital Motion (Aggressive Mode): This gear-driven mode provides rapid stock removal and is suitable for coarse sanding or polishing applications.
- Random Orbital Sanding Motion (Fine Mode): This mode is ideal for fine sanding, providing a smooth, swirl-free finish.
Switch between modes using the selector switch located on the top of the sander. Ensure the sander is off before changing modes.
3.2 වේග පාලනය
The sander features variable speed control, allowing you to adjust the oscillation rate to match the material and desired finish. Use the speed dial to select the appropriate speed for your task. Lower speeds are generally used for fine finishing or delicate materials, while higher speeds are for aggressive material removal.
3.3 බල ගැන්වීම සක්රිය / අක්රිය කිරීම
To turn the sander on, press the power switch. To turn it off, press the switch again. Always ensure a firm grip on the sander before powering it on.
4. නඩත්තු කිරීම
4.1 දූවිලි නිස්සාරණය
The Jetstream dust extraction design is highly efficient. For optimal performance and a clean workspace, connect the sander to a compatible dust extractor. Regularly empty the dust bag or container of your dust extractor.
4.2 Changing Sanding Pads
The FastFix tool-free backing pad changing system makes replacing pads simple. To change a pad, ensure the sander is unplugged. Firmly pull the old pad off and press the new pad onto the base until it is securely attached.
4.3 සාමාන්ය පිරිසිදු කිරීම
After each use, wipe down the sander with a clean, dry cloth. Ensure no dust or debris accumulates in the ventilation slots or around the sanding pad. Do not use harsh chemicals or abrasive cleaners.
5. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Sander does not power on. | බල සැපයුමක් නැත; විදුලි රැහැන ලිහිල්. | Check power outlet; ensure Plug-It Cord is securely connected. |
| Poor sanding results (e.g., swirl marks). | Worn abrasive; incorrect mode/speed; excessive pressure. | Replace abrasive; select appropriate mode/speed; apply even, light pressure. |
| අධික දූවිලි. | Dust extractor not connected/clogged; worn sanding pad. | Connect/clear dust extractor; replace sanding pad if holes are blocked. |
6. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| වෙළඳ නාමය | ෆෙස්ටූල් |
| නිෂ්පාදන මානයන් | 15.59"අඟල් x 11.65"අඟල් x 7.36"උ |
| ග්රිට් වර්ගය | රළු |
| බලශක්ති ප්රභවය | රැහැන්ගත විදුලි |
| AC ඇඩැප්ටර ධාරාව | 4.2 Amps |
| ග්රිට් අංකය | 60 |
| තැටි විෂ්කම්භය | අඟල් 5 |
| නිෂ්පාදකයා | ෆෙස්ටූල් |
| කොටස අංකය | 576032 |
| අයිතමයේ බර | රාත්තල් 8.26 කි |
| මුල් රට | ජර්මනිය |
| අයිතම ආකෘති අංකය | 576032 |
| අයිතම පැකේජ ප්රමාණය | 1 |
| බැටරි අවශ්යද? | නැත |
| පළමු දිනය තිබේ | 2 සැප්තැම්බර් 2020 |
7 ඇතුළත් සංරචක
The Festool Rotex RO 125 FEQ-Plus Random Orbital Sander package includes:
- සැන්ඩර්
- StickFix Sanding Pad
- Edge Protector
- 1 Abrasive Sheet
- Plug-It Cord
- New generation Systainer3 (fully compatible with current T-LOC Systainers and can be latched on top of Classic Systainer from 1993)
8. වගකීම් සහ සහාය
8.1 වගකීම් තොරතුරු
මෙම නිෂ්පාදනය a මගින් ආවරණය කර ඇත වසර 3ක නිෂ්පාදකයාගේ වගකීමක්වගකීම් හිමිකම් සඳහා කරුණාකර ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.
8.2 පාරිභෝගික සහාය
For technical assistance, spare parts, or service inquiries, please refer to the official Festool website or contact their customer service department. Detailed contact information can typically be found on the product packaging or the manufacturer's official webඅඩවිය.
