හන්වා ටෙක්වින් HCP-6320HA Full-HD 2MP ඇනලොග් HD PTZ Dome කැමරා පරිශීලක අත්පොත

හැඳින්වීම

This manual provides essential instructions for the installation, operation, and maintenance of your Hanwha Techwin HCP-6320HA Full-HD 2MP Analog HD PTZ Dome Camera. Please read this manual thoroughly before using the product to ensure proper and safe operation.

ආරක්ෂිත තොරතුරු

• Installation must be performed by qualified personnel in accordance with all local codes and regulations.
• Ensure the power supply (24V AC) matches the camera's requirements. Disconnect power before any installation or maintenance procedures.
• Do not expose the camera to extreme temperatures, humidity, or corrosive environments beyond its specified operating conditions.
• Avoid direct exposure of the lens to strong light sources, as this may damage the image sensor.
• This product is designed for outdoor use with IP66 weather protection and IK10 vandal resistance.

පැකේජයේ අන්තර්ගතය

ඔබගේ පැකේජයේ සියලුම සංරචක ඇති බව තහවුරු කරගන්න:

• HCP-6320HA PTZ Dome Camera
• පරිශීලක මාර්ගෝපදේශය (මෙම ලේඛනය)
• Mounting hardware (if included in standard package)

නිෂ්පාදනය අවසන්view

The Hanwha Techwin HCP-6320HA is a high-performance Full-HD 2MP Analog HD PTZ (Pan-Tilt-Zoom) dome camera designed for outdoor surveillance. It features a powerful 32x optical zoom lens (4.44-142.6mm), Day & Night functionality with an IR Cut Filter (ICR), Wide Dynamic Range (WDR 120dB), and advanced noise reduction (SSNRIII).

රූපය 1: ඉදිරිපස view of the Hanwha Techwin HCP-6320HA PTZ Dome Camera. The camera features a white dome housing with a clear protective bubble covering the lens assembly. The "Wisenet" logo is visible on the upper part of the dome.

ප්රධාන ලක්ෂණ

• 2 Megapixel (1920 x 1080) Full HD Resolution
• 1/2.8" CMOS Sensor
• 32x Optical Zoom (4.44 ~ 142.6mm)
• Day & Night (ICR) and Defog functions
• WDR (120dB) and SSNRIII (Digital Noise Reduction)
• High-speed Pan/Tilt: 700°/sec preset speed
• IP66 Weatherproof and IK10 Vandal-Proof ratings
• Analog HD (AHD/TVI/CVI/CVBS selectable) video output
• RS-485 and Coaxitron (Up the Coax) control

සැකසුම සහ ස්ථාපනය

කැමරාව සවි කිරීම

The HCP-6320HA is designed for wall mounting. Ensure the mounting surface is strong enough to support the camera's weight (approximately 7 lbs) and any associated cabling.

1. අපේක්ෂිත ක්ෂේත්‍රය සපයන සුදුසු සවි කිරීමේ ස්ථානයක් තෝරන්න view සහ බල සහ වීඩියෝ කේබල් වලට ළඟා විය හැකිය.
2. Use the provided mounting template (if applicable) to mark drilling points for the mounting bracket.
3. Drill pilot holes and secure the mounting bracket to the surface using appropriate screws and anchors.
4. Attach the camera to the mounting bracket, ensuring it is firmly secured.

රැහැන් සම්බන්ධතා

The camera requires a 24V AC power supply and uses wired connectivity for video and control.

1. බල සම්බන්ධතාවය: Connect the 24V AC power supply to the camera's power input. Ensure correct polarity.
2. වීඩියෝ ප්‍රතිදානය: Connect the analog HD video output (BNC connector) to your DVR or video monitoring system. The camera supports various analog HD formats (AHD, TVI, CVI) and CVBS, which can typically be selected via the OSD menu or DIP switches.
3. Control (Optional): For PTZ control, connect the RS-485 communication lines (Tx+/Tx-) to your DVR or PTZ controller. Alternatively, Coaxitron (Up the Coax) control can be used if supported by your DVR, eliminating the need for separate RS-485 wiring.

ආරම්භක වින්යාසය

After physical installation and wiring, power on the camera. Access the camera's On-Screen Display (OSD) menu via your DVR or controller to configure settings such as video format, PTZ protocols, and image adjustments.

කැමරාව ක්‍රියාත්මක කිරීම

පෑන්, ඇලවීම සහ විශාලනය (PTZ) පාලනය

The HCP-6320HA offers precise PTZ control, allowing you to remotely adjust the camera's viewකෝණය සහ විශාලන මට්ටම.

• පෑන්: Rotate the camera horizontally (360° continuous).
• ඇලවීම: Adjust the camera vertically.
• විශාලනය: Use the 32x optical zoom to magnify distant objects.
• අවධානය යොමු කරන්න: The camera typically features auto-focus, but manual focus may be available via the OSD menu.

Preset and Tour Functions

Configure specific camera positions (presets) and sequences of presets (tours) for automated surveillance.

• පෙරසිටුවීම් සැකසීම: Move the camera to the desired position, zoom, and focus, then save it as a preset through your DVR or controller interface. The camera supports high-speed preset recall.
• Running Tours: Create a tour by linking multiple presets in a specific order and duration.

රූප සැකසුම්

Adjust various image parameters through the OSD menu to optimize video quality for different lighting conditions.

• WDR (පුළුල් ගතික පරාසය): Improves visibility in scenes with both very bright and very dark areas.
• දිවා සහ රාත්‍රී: Automatically switches between color (day) and black & white (night) modes, utilizing the IR Cut Filter (ICR).
• SSNRIII: Reduces digital noise in low-light conditions.
• විකෘති: Enhances image clarity in foggy or hazy environments.

නඩත්තු කිරීම

පිරිසිදු කිරීම

• Regularly clean the camera's dome cover with a soft, damp දූවිලි හා අපිරිසිදුකම් ඉවත් කිරීමට රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන්ගෙන් වළකින්න.
• Ensure the lens is free from smudges or obstructions for clear image quality.

ස්ථිරාංග යාවත්කාලීන කිරීම්

Periodically check the Hanwha Techwin website for firmware updates. Firmware updates can improve performance, add new features, or address security vulnerabilities. Follow the manufacturer's instructions carefully when performing updates.

දෝෂගවේෂණය

පොදු ගැටළු සහ විසඳුම්

පිරිවිතර

වගකීම් සහ සහාය

For warranty information and technical support, please refer to the official Hanwha Techwin website or contact your authorized dealer. Keep your purchase receipt for warranty claims.