MIRFAK MC1 Lavalier Microphone User Manual

හැඳින්වීම

The MIRFAK MC1 is an omnidirectional lavalier condenser microphone designed for clear audio capture. It is compatible with a wide range of devices, including DSLR cameras, camcorders, mobile phones, personal computers (PCs), and audio recorders. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your MC1 microphone to ensure optimal performance.

පැකේජයේ අන්තර්ගතය

පහත ලැයිස්තුගත කර ඇති සියලුම අයිතම ඔබේ පැකේජයට ඇතුළත් කර ඇති බව කරුණාකර සත්‍යාපනය කරන්න:

• MIRFAK MC1 Lavalier Microphone with 6-meter cable
• Lapel Clip
• ෆෝම් වින්ඩ්ස්ක්‍රීන්
• LR44 බැටරි
• 6.35mm ඇඩැප්ටරය
• රැගෙන යන මල්ල

Image: The MIRFAK MC1 Lavalier Microphone shown with its included accessories: the microphone unit, 6-meter cable, lapel clip, foam windscreen, LR44 battery, 6.35mm adapter, and a protective carrying pouch.

සැලසුම

1. බැටරි ස්ථාපනය

1. Unscrew the microphone's control module to reveal the battery compartment.
2. Insert the provided LR44 battery, ensuring correct polarity (+/-).
3. Securely screw the control module back together.

2. ඔබගේ උපාංගයට සම්බන්ධ වීම

The MC1 microphone features a 3.5mm TRRS connector for broad compatibility.

• ස්මාර්ට්ෆෝන්/ටැබ්ලට් සඳහා: Plug the 3.5mm TRRS connector directly into your device's headphone/microphone jack.
• For DSLR Cameras/Camcorders/Audio Recorders: Plug the 3.5mm TRRS connector into your device's microphone input. If your device has a 6.35mm input, use the included 6.35mm adapter.
• පරිගණක සඳහා: Connect the 3.5mm TRRS connector to the microphone input on your computer. Some PCs may require a splitter if separate headphone and microphone jacks are present.

Image: The MIRFAK MC1 Lavalier Microphone shown connected to a mobile phone, DSLR camera, audio recorder, and PC, illustrating its broad compatibility.

3. මයික්‍රෆෝනය සවි කිරීම

1. Attach the lapel clip to the microphone unit.
2. Gently place the foam windscreen over the microphone capsule to reduce wind noise and plosives.
3. Clip the microphone to your clothing, ideally 6-8 inches (15-20 cm) from your mouth, ensuring it is not obstructed by clothing or jewelry.

Image: Detail of the microphone's lapel clip for secure attachment to clothing.

Image: The foam windscreen, designed to reduce unwanted noise from wind and breath.

මෙහෙයුම් උපදෙස්

1. මෙහෙයුම් මාදිලිය තේරීම

The MC1 features a switch on its control module to select between 'CAMERA' and 'PHONE' modes. This switch optimizes the microphone's output for the connected device.

• ස්විචය සකසන්න කැමරාව mode when connecting to DSLR cameras, camcorders, or audio recorders. This mode activates the internal battery.
• ස්විචය සකසන්න දුරකථනය mode when connecting to smartphones, tablets, or PCs. In this mode, the microphone draws power from the device.

Image: Close-up of the control module showing the 'CAMERA' and 'PHONE' mode selection switch.

2. Recording Tips

• ස්ථානගත කිරීම: Position the microphone approximately 6-8 inches (15-20 cm) from the sound source for optimal clarity.
• සර්ව දිශානුගත පිකප්: The MC1 features an omnidirectional polar pattern, meaning it picks up sound equally from all directions. This is ideal for interviews or situations where sound comes from multiple sources.
• කේබල් කළමනාකරණය: The 6-meter cable provides flexibility. Ensure the cable is not tangled or under tension to prevent accidental disconnections or damage.
• අධීක්ෂණය: If your recording device allows, monitor the audio with headphones during recording to ensure proper levels and sound quality.

Image: Visual representation of the 360-degree omnidirectional sound pickup pattern of the microphone.

නඩත්තු කිරීම

• පිරිසිදු කිරීම: Use a soft, dry cloth to clean the microphone body and cable. Do not use liquid cleaners or solvents.
• වින්ඩ්ස්ක්‍රීන්: The foam windscreen can be gently washed with mild soap and water if it becomes dirty. Ensure it is completely dry before reattaching.
• ගබඩා: When not in use, store the microphone and its accessories in the provided carrying pouch to protect them from dust and physical damage. Avoid extreme temperatures and high humidity.
• බැටරි: If the microphone will not be used for an extended period, remove the LR44 battery to prevent leakage and potential damage to the control module.

දෝෂගවේෂණය

• ශබ්දයක් නැත/අඩු ශබ්දයක්:
  • Ensure the microphone is securely plugged into the device's microphone input.
  • Check the 'CAMERA'/'PHONE' switch position matches your device type.
  • Verify the LR44 battery is correctly installed and not depleted (for 'CAMERA' mode). Replace if necessary.
  • Adjust input levels on your recording device.
  • Test with another device to rule out device-specific issues.
• විකෘති ශබ්දය:
  • Ensure the microphone is not too close to the sound source, causing clipping.
  • Reduce input gain on your recording device.
  • Check for physical damage to the cable or connectors.
• අධික පසුබිම් ශබ්දය:
  • Ensure the foam windscreen is properly installed.
  • නිහඬ පරිසරයක පටිගත කරන්න.
  • Check for interference from other electronic devices. The durable 6-meter cable features a high-density shielding layer to prevent external interference.
  

  රූපය: හරස්කඩක් view of the microphone cable, highlighting its multi-layered construction and high-density shielding for stable signal transmission.

පිරිවිතර

වගකීම් සහ සහාය

The MIRFAK MC1 Lavalier Microphone comes with a වසර 1ක වගකීමක් from the date of purchase. This warranty covers manufacturing defects and ensures the product is free from defects in materials and workmanship under normal use.

For technical support, warranty claims, or any inquiries regarding your MIRFAK MC1 microphone, please contact MIRFAK customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number (MC1) ready when contacting support.