1. හැඳින්වීම
The Ledlenser P6R Work is a robust and versatile LED rechargeable torch designed for demanding work environments. It features high dust and water protection (IP68), impact-resistant rubber covers, and chemical resistance, ensuring durability. This manual provides essential information for the proper setup, operation, and maintenance of your P6R Work torch.
2. නිෂ්පාදන අවසන්view
ප්රධාන ලක්ෂණ
- කල්පැවැත්ම: IP68 dust and water protection, impact-protecting rubber covers, chemical resistance, and a protective lens.
- උසස් නාභිගත පද්ධතිය: Seamless transition between a focused spot beam and a wide flood beam.
- ආලෝකකරණ කාර්යයන්: Includes SOS, Strobe, and Boost modes.
- ස්වභාවික ආලෝකය: High CRI 90 for accurate color reproduction.
- සහායක ආලෝකය: Diffused, cool white auxiliary light on the side for close-range illumination.
- දිගු බැටරි ආයු කාලය: Up to 45 hours of lighting on a single charge.
- Emergency Light Mode: Provides illumination during power outages.
ඇතුළත් සංරචක
The Ledlenser P6R Work package typically includes the following items:
- නැවත ආරෝපණය කළ හැකි බැටරි
- චුම්බක ආරෝපණ කේබලය
- නිකුතු පොල
- අත් පටිය
- මල්ල
- USB බල ඇඩැප්ටරය
- Intelligent Clip (Belt Clip)
3. පිහිටුවීම
බැටරි ස්ථාපනය
- Unscrew the end cap of the torch by turning it counter-clockwise.
- Insert the included rechargeable battery with the positive (+) terminal facing towards the head of the torch.
- Screw the end cap back on clockwise until secure.
මූලික ආරෝපණය
පළමු භාවිතයට පෙර, බැටරිය සම්පූර්ණයෙන්ම ආරෝපණය කරන්න.
- Connect the magnetic charging cable to the charging port on the torch. The magnetic connector will snap into place.
- Connect the USB end of the charging cable to the USB power adapter, and then plug the adapter into a power outlet. Alternatively, use the charging station by placing the torch onto it.
- The battery indicator light will show the charging status. A full charge is indicated when the light turns green.
4. මෙහෙයුම් උපදෙස්
Power On/Off and Brightness Modes
The torch is operated via the main switch button located on the body.
- සක්රිය / අක්රිය කිරීමට: Press the main switch button once.
- To Cycle Brightness Modes: While the torch is on, press the main switch button repeatedly to cycle through different brightness levels (e.g., Low, Medium, High).
- බූස්ට් මාදිලිය: A quick double-press of the main switch button may activate a temporary boost mode for maximum brightness.
Special Functions (SOS, Strobe)
Specific sequences of button presses activate special functions:
- Consult the detailed instructions provided in the full product manual for exact button sequences to activate SOS and Strobe modes. These typically involve holding the button or specific multi-press patterns.
උසස් නාභිගත පද්ධතිය
The Advanced Focus System allows you to adjust the light beam from a broad floodlight to a sharply focused spot beam.
- To adjust the focus, slide the head of the torch forward or backward.
- Sliding forward typically narrows the beam for a spot focus.
- Sliding backward widens the beam for a flood illumination.
සහායක ආලෝකය
The P6R Work features a diffused, cool white auxiliary light on the side for close-range tasks.
- To activate the auxiliary light, locate the dedicated button or follow the specific button sequence outlined in the full manual.
- This light is ideal for illuminating immediate surroundings without the intensity of the main beam.
5. නඩත්තු කිරීම
පිරිසිදු කිරීම
- ටෝච් එකේ බඳ මෘදු, d බ්රේකර් එකකින් පිස දමන්න.amp රෙදි.
- Do not use abrasive cleaners or solvents, as these can damage the finish or rubber components.
- Clean the lens gently with a lens cleaning cloth to avoid scratches.
බැටරි සත්කාර
- Charge the battery regularly, even if the torch is not in frequent use, to maintain battery health.
- Store the torch and battery in a cool, dry place.
- If the torch will not be used for an extended period, remove the battery.
ජල ප්රතිරෝධය (IP68)
The P6R Work is rated IP68, meaning it is protected against dust ingress and can withstand continuous immersion in water up to a specified depth (typically 1.5 meters for 30 minutes).
- Ensure all caps and covers are securely fastened before exposing the torch to water or dusty environments.
- After exposure to saltwater, rinse the torch with fresh water and dry thoroughly.
6. දෝශ නිරාකරණය
If you encounter issues with your Ledlenser P6R Work torch, refer to the following common solutions:
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Torch does not turn on | Low or depleted battery; improperly installed battery; loose connections. | Charge the battery fully. Ensure the battery is inserted correctly with the correct polarity. Tighten the end cap securely. |
| ආලෝකය අඳුරු හෝ දැල්වෙමින් පවතී | Low battery charge; dirty battery contacts. | Recharge the battery. Clean battery contacts with a dry cloth. |
| Torch not charging | Charging cable not properly connected; faulty USB adapter or power source; dirty charging contacts. | Ensure the magnetic charging cable is securely attached. Try a different USB power adapter or power outlet. Clean the charging contacts on both the torch and the cable. |
| Focus system is stiff | Dirt or debris in the focusing mechanism. | Gently clean the exterior of the focusing mechanism. Avoid forcing the movement. |
If the problem persists after attempting these solutions, please contact Ledlenser customer support.
7. පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| ආදර්ශ අංකය | 502186 |
| ආලෝක ප්රතිදානය (උපරිම) | 850 Lumens |
| කදම්භ දුර (උපරිම) | මීටර් 230 කි |
| බැටරි ආයු කාලය (උපරිම) | පැය 45 දක්වා |
| ජල ප්රතිරෝධය | IP68 |
| ආලෝක ප්රභවයේ වර්ගය | LED (High CRI 90) |
| බලශක්ති ප්රභවය | නැවත ආරෝපණය කළ හැකි ලිතියම් අයන බැටරි |
| ද්රව්ය | Aluminum with rubber protectors |
| මානයන් (ඩී x ඩබ්ලිව් x එච්) | 1.57"D x 1.57"W x 6.42"H |
| අයිතමයේ බර | අවුන්ස 6.6 (කිලෝග්රෑම් 0.19) |
8. වගකීම් සහ සහාය
වගකීම් තොරතුරු
The Ledlenser P6R Work LED torch comes with a warranty that covers defects in manufacturing. With product registration, this warranty can extend up to 7 years. Please refer to the official Ledlenser webසම්පූර්ණ නියමයන් සහ කොන්දේසි සඳහා ඔබේ නිෂ්පාදනය සමඟ ඇතුළත් කර ඇති වෙබ් අඩවිය හෝ වගකීම් කාඩ්පත.
පාරිභෝගික සහාය
For technical assistance, warranty claims, or further inquiries, please visit the official Ledlenser website or contact their customer support directly. You can also find more information and products at the Ledlenser Store on Amazon.
