හැඳින්වීම
The LAUNCH CRP129 Premium is a professional diagnostic tool designed for automotive technicians and enthusiasts. It provides comprehensive diagnostic capabilities for four major vehicle systems: Engine, Transmission (A/T), Anti-lock Braking System (ABS), and Supplemental Restraint System (SRS/Airbag). This device supports all 10 test modes of OBD II, including enhanced OBD II Mode 6, and offers advanced reset functions for Oil Service Light, Electronic Parking Brake (EPB), Steering Angle Sensor (SAS), and Battery Management System.
With its intuitive interface, 4.0-inch TFT full-color display, and robust design, the CRP129 Premium allows users to efficiently read and clear diagnostic trouble codes (DTCs), view live data streams, freeze frame data, and I/M readiness status. It supports a wide range of vehicle makes and models, providing a powerful solution for diagnosing drive-ability issues and performing essential maintenance tasks.
පැකේජයේ අන්තර්ගතය
- 1x LAUNCH CRP129 Premium Diagnostic Tool
- 1x OBDII කේබලය
- 1x ආරෝපණ කේබල් (USB)
- 1x රැගෙන යන බෑගය
- 1x පරිශීලක අත්පොත (මෙම ලේඛනය)
සැකසුම සහ මූලික භාවිතය
Follow these steps to set up and begin using your CRP129 Premium diagnostic tool:
- OBD-II තොට සොයා ගන්න: The OBD-II (On-Board Diagnostics II) port is typically located under the dashboard on the driver's side of the vehicle. Refer to your vehicle's owner's manual if you cannot locate it.
- Connect the OBDII Cable: Plug one end of the provided OBDII cable into the 16-pin connector on the CRP129 Premium device.
- වාහනයට සම්බන්ධ කරන්න: Plug the other end of the OBDII cable into the vehicle's OBD-II port. The device will power on automatically, drawing power directly from the vehicle's battery.
- බල ගැන්වීම: Once connected, the CRP129 Premium will power on. The screen will display the LAUNCH logo and then the main menu.
- භාෂා තේරීම: If prompted, select your preferred language (English, Spanish, or French are supported).
Image: The CRP129 Premium diagnostic tool being held and connected to a vehicle's OBD-II port, illustrating the setup process.
මෙහෙයුම් උපදෙස්
The CRP129 Premium features a user-friendly interface with a 4.0-inch color display and intuitive button operation. Use the directional pad (up, down, left, right) to navigate menus, the "OK" button to confirm selections, and the "ESC" button to go back.
රූපය: ඉදිරිපස view of the CRP129 Premium, highlighting its display and navigation buttons for operation.
රෝග විනිශ්චය කාර්යයන්
- System Scan: Select "Diagnose" from the main menu. The tool will automatically identify the vehicle and scan for available systems (Engine, Transmission, ABS, SRS).
- කේත කියවන්න: Displays current, pending, and permanent Diagnostic Trouble Codes (DTCs) for the selected system. Each code comes with a brief description.
- කේත හිස් කරන්න: Erases DTCs from the vehicle's computer. Ensure the underlying issue is resolved before clearing codes to prevent them from reappearing.
- සජීවී දත්ත ප්රවාහය: Displays real-time data parameters from the vehicle's sensors. Data can be viewed in numerical or graphical format. Key parameters include engine speed, vehicle speed, coolant temperature, O2 sensor position, MAF/airflow, and short/long term fuel trims.
- රාමු දත්ත කැටි කරන්න: DTC එකක් සැකසූ මොහොතේ සංවේදක දත්තවල සැණරුවක් ග්රහණය කර, රෝග විනිශ්චය සඳහා වටිනා තොරතුරු සපයයි.
- I/M සූදානම තත්ත්වය: වාහනය විමෝචන පරීක්ෂණයකට සූදානම් දැයි තීරණය කිරීම සඳහා විමෝචනයට අදාළ මොනිටරවල තත්ත්වය පරීක්ෂා කරයි.
- Enhanced OBD II Mode 6: Provides access to test results for non-continuously monitored systems.
කාර්යයන් යළි පිහිටුවන්න
The CRP129 Premium offers several special reset functions:
- Oil Service Light Reset: Resets the oil maintenance light after an oil change.
- Electronic Parking Brake (EPB) Release: Allows for safe deactivation and reactivation of the electronic parking brake system for brake pad replacement.
- සුක්කානම් කෝණ සංවේදකය (SAS) යළි පිහිටුවීම: Calibrates the steering angle sensor after steering system repairs or alignment.
- බැටරි යළි පිහිටුවීම: Performs battery registration or adaptation after replacing the vehicle's starter battery.
මෘදුකාංග යාවත්කාලීන
The CRP129 Premium supports lifetime free internet updates via USB 2.0. To update the software:
- නිල දියත් කිරීම වෙත පිවිසෙන්න website (refer to the device's packaging or back label for the exact URL).
- Download and install the update tool software on your PC.
- Connect the CRP129 Premium to your PC using the provided USB cable.
- Follow the on-screen instructions in the update tool to download and install the latest software versions for your device.
නඩත්තු කිරීම සහ රැකවරණය
- පිරිසිදු කිරීම: උපාංගය පිරිසිදු කිරීම සඳහා මෘදු වියළි රෙද්දක් භාවිතා කරන්න. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවක භාවිතා නොකරන්න.
- ගබඩා: Store the device in its carrying bag in a cool, dry place away from direct sunlight and extreme temperatures.
- කේබල් රැකවරණය: Avoid bending or twisting the OBDII cable excessively. Always grasp the connector when plugging or unplugging.
- මෘදුකාංග යාවත්කාලීන: Regularly check for and install software updates to ensure optimal performance and compatibility with new vehicle models.
දෝෂගවේෂණය
If you encounter issues with your CRP129 Premium, consider the following common troubleshooting steps:
- උපාංගය ක්රියාත්මක නොවේ:
- Ensure the OBDII cable is securely connected to both the device and the vehicle's OBD-II port.
- Verify the vehicle's ignition is in the ON position (engine can be off).
- Check the vehicle's fuse for the OBD-II port (usually labeled "CIGAR" or "ACC").
- සන්නිවේදන දෝෂය:
- Confirm the vehicle supports the OBD-II standard (most vehicles from 1996 onwards).
- Ensure the ignition is ON.
- වාහනයට විශේෂිත ගැටළුවක් බැහැර කිරීම සඳහා වෙනත් වාහනයකට සම්බන්ධ වීමට උත්සාහ කරන්න.
- Check for any loose connections in the OBDII cable.
- Incorrect Readings/Codes:
- මෘදුකාංගය යාවත්කාලීන බව සහතික කර ගන්න.
- Verify the vehicle information (VIN, year, make, model) is correctly identified by the tool.
For persistent issues, refer to the official LAUNCH support resources or contact their customer service.
තාක්ෂණික පිරිවිතර
Image: The back of the CRP129 Premium device, displaying its technical specifications label.
| විශේෂාංගය | පිරිවිතර |
|---|---|
| ප්රදර්ශනය කරන්න | 4.0" TFT full color display |
| වෙළුමtagඊ පරාසය | 12Vdc (via OBD interface) |
| මෙහෙයුම් උෂ්ණත්වය | 0°C සිට 50°C (32°F සිට 122°F) |
| ගබඩා උෂ්ණත්වය | -20°C සිට 70°C (-4°F සිට 158°F) |
| මානයන් | 196 x 106 x 32 මි.මී |
| බර | ආසන්න වශයෙන්. 680 ග්රෑම් |
| සම්බන්ධතාවය | Standardized 16-pin OBD connector, USB 2.0 |
| සහාය දක්වන ප්රොටෝකෝල | J1850 PWM, J1850 VPW, ISO9141-2, ISO14230-4, ISO 15765 (CAN) |
| වර්ණය | රතු |
| නිෂ්පාදකයා | Launch Tech |
සහාය සහ වගකීම්
For technical support, product inquiries, or warranty information, please contact LAUNCH customer service. Details can typically be found on the official LAUNCH website or the product packaging. Keep your purchase receipt as proof of purchase for warranty claims.
Regular software updates are available for free to ensure your device remains compatible with the latest vehicle models and diagnostic protocols.
