SHARKOON Elite Shark CA300T Extended ATX PC Case User Manual

1. හැඳින්වීම

This manual provides comprehensive instructions for the SHARKOON Elite Shark CA300T Extended ATX PC Case. It covers the product's features, setup procedures, operational guidelines, maintenance tips, troubleshooting solutions, and detailed technical specifications. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your PC case.

2 ප්රධාන ලක්ෂණ

• අනාගත නිර්මාණය: The CA300T features an expressive front panel with a geometric pattern, framed by brushed aluminum, giving it a distinctive and modern aesthetic.
• උසස් වායු ප්‍රවාහය: Equipped with three pre-installed 120mm RGB LED fans at the front and one at the rear, ensuring consistent airflow. The front panel includes a mesh grille for optimal ventilation, and the top panel offers a perforated cover for additional fan/radiator mounting.
• Illuminated I/O Panel: The side-mounted I/O panel includes standard audio ports, USB 3.0 ports, and a USB-C port, all featuring their own RGB illumination.
• තෙම්පරාදු වීදුරු පැනල්: Two tempered glass side panels provide a clear view of internal components. The right-side panel is partially tinted to conceal the power supply tunnel while highlighting SSDs or HDDs.
• ඉඩකඩ සහිත අභ්යන්තරය: Designed to accommodate large components, including graphics cards up to 42.5 cm, power supplies up to 24 cm, and CPU coolers up to 16.5 cm.
• කාර්යක්ෂම කේබල් කළමනාකරණය: Features a spacious, foldable cable compartment and a sliding cable cover to keep wiring organized and out of sight.
• ගබඩා විකල්ප: Supports up to seven 2.5-inch drives or four 3.5-inch drives.

3. පැකේජ අන්තර්ගතය

The SHARKOON Elite Shark CA300T PC Case package typically includes:

• SHARKOON Elite Shark CA300T PC Case (White)
• Pre-installed 120mm RGB LED Fans (3x Front, 1x Rear)
• උපාංග පෙට්ටිය (ඉස්කුරුප්පු, කේබල් බැඳීම්, ස්ථාවරයන් ආදිය)
• පරිශීලක අත්පොත (මෙම ලේඛනය)

Note: Specific contents may vary slightly. Please check the packaging for a complete list.

4. සැකසුම් උපදෙස්

Follow these steps to set up your SHARKOON Elite Shark CA300T PC case and install your components.

4.1. නඩුව සකස් කිරීම

1. නඩුව ඉවත් කරන්න: පරිගණක කවරය එහි ඇසුරුම්වලින් ප්‍රවේශමෙන් ඉවත් කරන්න.
2. පැති පැනල් ඉවත් කරන්න: Unscrew the thumbscrews on the rear of the case for both tempered glass side panels. Gently slide and lift the panels to remove them. Place them on a soft, flat surface to prevent scratches.
3. අමතර පෙට්ටිය: Locate the accessory box inside the case, which contains all necessary screws and mounting hardware.

4.2. මවු පුවරු ස්ථාපනය

1. Standoffs ස්ථාපනය කරන්න: Ensure the correct standoffs are installed for your motherboard form factor (ATX, SSI EEB). The case typically has pre-installed standoffs for standard ATX.
2. I/O පලිහ ස්ථාපනය කරන්න: If your motherboard requires an external I/O shield, install it into the rear opening of the case before mounting the motherboard.
3. මවු පුවරුව සවි කිරීම: Carefully place your motherboard onto the standoffs, aligning the screw holes. Secure the motherboard with the provided screws.

4.3. බල සැපයුම් ඒකකය (PSU) ස්ථාපනය

1. Position PSU: The PSU mounts at the rear bottom of the case. Slide your PSU into the designated compartment from the rear.
2. Secure PSU: Align the PSU with the screw holes and secure it with the provided screws from the rear of the case.
3. කේබල් කළමනාකරණය: Route PSU cables through the cutouts to the back of the motherboard tray for organized cable management.

4.4. ගබඩා ධාවක ස්ථාපනය

The CA300T supports various drive configurations:

• 2.5-inch Drives (SSDs): Mount SSDs to the dedicated brackets behind the motherboard tray or within the PSU shroud.
• 3.5-inch Drives (HDDs): Install HDDs into the drive cages located under the PSU shroud.

4.5. ග්‍රැෆික් කාඩ් සහ විස්තාරණ කාඩ් ස්ථාපනය

1. ස්ලොට් ආවරණ ඉවත් කරන්න: නඩුවේ පිටුපසින් අවශ්‍ය විස්තාරණ තව් ආවරණ ඉවත් කරන්න.
2. Install Card: ඔබේ ග්‍රැෆික් කාඩ්පත හෝ වෙනත් පුළුල් කිරීමේ කාඩ්පත් මවු පුවරුවේ සුදුසු PCIe තව් වලට ඇතුළු කරන්න.
3. ආරක්ෂිත කාඩ්පත: Secure the card with the provided screws.

4.6. ඉදිරිපස පැනල් කේබල් සම්බන්ධ කිරීම

Connect the front panel cables (USB 3.0, USB-C, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to their corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

4.7. අවසාන එකලස් කිරීම

1. කේබල් කළමනාකරණය: Use the cable ties and routing channels to organize all internal cables behind the motherboard tray.
2. පැති පැනල් නැවත සවි කරන්න: Carefully reattach both tempered glass side panels and secure them with the thumbscrews.

රූපය 1: අභ්යන්තරය view of the CA300T, highlighting component space.

5. මෙහෙයුම් උපදෙස්

5.1. ඔබේ පද්ධතිය බල ගැන්වීම

After all components are installed and cables are connected, plug your power supply into a wall outlet and flip the PSU's power switch to the 'ON' position. Press the power button on the case's front I/O panel to start your computer.

5.2. RGB ආලෝකකරණ පාලනය

The pre-installed RGB fans and illuminated I/O panel can be controlled via your motherboard's RGB software (if compatible) or a dedicated RGB controller if included with your motherboard or purchased separately. Refer to your motherboard manual for specific RGB header locations and software instructions.

Figure 2: The CA300T with its illuminated RGB fans and distinctive front panel.

6. නඩත්තු කිරීම

නිතිපතා නඩත්තු කිරීම ප්‍රශස්ත ක්‍රියාකාරිත්වය සහතික කිරීමට සහ ඔබේ පරිගණක සංරචකවල ආයු කාලය දීර්ඝ කිරීමට උපකාරී වේ.

6.1. දූවිලි පෙරහන් පිරිසිදු කිරීම

The CA300T includes magnetic dust filters. It is recommended to clean these filters every 1-3 months, depending on your environment, to maintain optimal airflow and prevent dust buildup inside the case.

1. Locate Filters: Identify the dust filters on the top, front, and bottom of the case.
2. පෙරහන් ඉවත් කරන්න: Gently pull or slide out the magnetic dust filters.
3. පිරිසිදු පෙරහන්: Use a soft brush, vacuum cleaner, or rinse with water (ensure completely dry before reinstallation) to remove accumulated dust.
4. පෙරහන් නැවත ස්ථාපනය කරන්න: Place the clean filters back into their respective positions.

6.2 සාමාන්ය පිරිසිදු කිරීම

For external surfaces, use a soft, damp cloth to wipe down the case. Avoid abrasive cleaners or solvents that could damage the finish or tempered glass.

රූපය 3: ඉහළ view of the CA300T, showing the perforated top panel.

7. දෝශ නිරාකරණය

මෙම කොටස සැකසීමේදී හෝ ක්‍රියාත්මක කිරීමේදී ඔබට මුහුණ දීමට සිදුවිය හැකි පොදු ගැටළු ආමන්ත්‍රණය කරයි.

7.1. පද්ධතිය ක්‍රියාත්මක නොවේ

• Check PSU: Ensure the power supply unit is properly connected to the wall outlet and the PSU's power switch is in the 'ON' position.
• ඉදිරිපස පැනල් සම්බන්ධතා: Verify that the power switch cable from the case's front panel is correctly connected to the motherboard's power header.
• Internal Power Cables: Confirm that all necessary power cables (24-pin ATX, CPU 8-pin, GPU PCIe) are securely connected to the motherboard and components.

7.2. Fans Not Spinning / RGB Not Lighting Up

• විදුලි පංකා සම්බන්ධතා: Ensure all fan power cables are securely connected to the motherboard's fan headers or a fan controller.
• RGB Connections: Verify that RGB cables are correctly connected to the motherboard's RGB headers or a dedicated RGB controller.
• Software/Controller: Check your motherboard's BIOS/UEFI settings or RGB software to ensure fans and RGB lighting are enabled and configured correctly.

7.3. USB ports ක්‍රියා නොකරයි

• Internal USB Headers: Confirm that the internal USB 3.0 and USB-C cables from the case's front panel are securely connected to the corresponding headers on your motherboard.
• Motherboard Drivers: Ensure all necessary motherboard chipset and USB drivers are installed.

8. තාක්ෂණික පිරිවිතර

9. වගකීම් සහ සහාය

9.1. නිෂ්පාදන වගකීම්

The SHARKOON Elite Shark CA300T PC Case comes with a වසර 2ක වගකීමක් on spare parts. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

9.2. මෘදුකාංග යාවත්කාලීන

Software updates, if applicable for any integrated components or controllers, are guaranteed until අප්රේල් 13, 2030.

9.3. පාරිභෝගික සහාය

For technical assistance, warranty claims, or further inquiries, please contact Sharkoon customer support through their official website or the retailer where the product was purchased. Have your product model and proof of purchase ready when contacting support.