1. හැඳින්වීම
Thank you for choosing the Tasmor 76-LED Motion Sensor Cabinet Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new light. Please read this manual thoroughly before use and retain it for future reference.
2. නිෂ්පාදන අවසන්view
2.1 ප්රධාන ලක්ෂණ
- ඉහළ දීප්තිය: Equipped with 76 warm white energy-saving LEDs, providing 170 lumens of soft, flicker-free light. Color rendering index (CRI) is over 80.
- චලන සංවේදක මාදිලිය: Features 3 lighting modes (ON/OFF/Auto). In Auto mode, it detects motion within 3 meters (approximately 10 feet) in darkness and automatically turns off after about 18 seconds of no motion. The detection angle is 120°. If ambient brightness is sufficient, the light will not activate.
- USB නැවත ආරෝපණය කළ හැකි: Conveniently rechargeable via the included USB cable, eliminating the need for frequent battery replacement.
- පහසු ස්ථාපනය: Magnetic attachment allows for simple installation and removal. No tools required.
- බහුකාර්ය යෙදුම: Ideal for kitchens, stairs, cabinets, offices, walls, mirrors, closets, hallways, basements, workshops, garages, or as an emergency light.
- කල් පවතින ඉදිකිරීම්: එල්amp housing is made of high-quality aluminum alloy, which is rust-proof and easy to clean.
2.2 පැකේජයේ අන්තර්ගතය
- Tasmor 76-LED Motion Sensor Cabinet Light
- USB ආරෝපණ කේබලය
- Magnetic Metal Sheets (for adhesive mounting)
- පරිශීලක අත්පොත
Image 2.2.1: The Tasmor 76-LED Motion Sensor Cabinet Light, showing the light bar, USB charging cable, and two magnetic metal sheets for installation.
3. තාක්ෂණික පිරිවිතර
| වෙළඳ නාමය | ටස්මෝර් |
| ආකෘතිය | B08LV41TPC |
| නිෂ්පාදන මානයන් (L x W x H) | 40.5 x 4 x 0.95 cm (15.9 x 1.6 x 0.4 අඟල්) |
| බර | ග්රෑම් 220 (රාත්තල් 0.48) |
| ද්රව්ය | Iron (housing) |
| ශෛලිය | සමකාලීන |
| සැහැල්ලු වර්ණය | උණුසුම් සුදු |
| LED ගණන | 76 |
| ලුමිනස් ෆ්ලක්ස් | 170 Lumens |
| වර්ණ උෂ්ණත්වය | 3000K |
| වර්ණ විදැහුම්කරණ දර්ශකය (CRI) | 80.00 |
| වෙළුමtage | වෝල්ට් 3.7 |
| බලය | වොට් 3 |
| විශේෂ ලක්ෂණය | චලන අනාවරකය |
| බලශක්ති ප්රභවය | බැටරි බලයෙන් ක්රියාත්මක (USB නැවත ආරෝපණය කළ හැකි) |
4. පිහිටුවීම සහ ස්ථාපනය
The Tasmor cabinet light is designed for easy, tool-free installation using its magnetic attachment system.
4.1 ස්ථාපන පියවර
- මතුපිට සකස් කරන්න: අපේක්ෂිත ස්ථාපන පෘෂ්ඨය වියළි බවත් දූවිලි හෝ ග්රීස් වලින් තොර බවත් සහතික කිරීම සඳහා හොඳින් පිරිසිදු කරන්න.
- Attach Metal Sheets: Peel off the protective film from the adhesive side of the provided magnetic metal sheets. Firmly press the metal sheets onto the cleaned surface. Ensure they are spaced appropriately for the length of the light bar.
- ආලෝකය සවි කරන්න: The light bar has built-in magnets. Simply align the light bar with the installed metal sheets and allow the magnets to secure it in place.
Image 4.1.1: Step-by-step visual guide for installing the light: 1. Cleaning the surface, 2. Attaching the adhesive metal sheet, 3. Magnetically mounting the light bar.
The magnetic attachment allows for easy removal of the light bar for charging or repositioning.
4.2 නිample යෙදුම්
Image 4.2.1: Lights installed inside a closet for enhanced visibility.
Image 4.2.2: Lights providing illumination in a bedroom wardrobe and above a desk.
5. මෙහෙයුම් උපදෙස්
The light features a switch to select between three operating modes:
- ක්රියාත්මක මාදිලිය: ආලෝකය අඛණ්ඩව පවතී.
- අක්රිය මාදිලිය: ආලෝකය නිවා දමයි.
- AUTO Mode (Motion Sensor): The light will automatically turn on when motion is detected in a dark environment. It will turn off approximately 18 seconds after motion ceases. The detection range is up to 3 meters (10 feet) with a 120° angle. The sensor will not activate if the ambient light is sufficient.
Image 5.1.1: The light operating in Auto mode, detecting motion within a 120° angle in a kitchen environment.
6. උපාංගය ආරෝපණය කිරීම
The Tasmor cabinet light is equipped with a rechargeable battery. When the battery is low, the light output may diminish or cease. To charge:
- Remove the light bar from its magnetic mounting.
- Connect the included USB charging cable to the charging port on the light bar.
- Connect the other end of the USB cable to a standard USB power source (e.g., USB adapter, power bank, computer USB port).
- An indicator light will show the charging status: typically red for charging and blue for fully charged.
Image 6.1.1: Close-up of the light bar showing the USB charging port and indicator lights for 'Recharging' (red) and 'Fully Charged' (blue).
7 රැකවරණය සහ නඩත්තුව
- පිරිසිදු කිරීම: Use a soft, dry cloth to wipe the surface of the light. For stubborn dirt, a slightly damp cloth can be used, but ensure no water enters the electronic components. Do not use abrasive cleaners or solvents.
- ගබඩා: If storing the light for an extended period, ensure it is fully charged and store it in a cool, dry place. Recharge periodically to maintain battery health.
- පරිසරය: Avoid exposing the light to extreme temperatures, direct sunlight, or high humidity.
8. දෝශ නිරාකරණ මාර්ගෝපදේශය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| AUTO ප්රකාරයේදී ආලෝකය දැල්වෙන්නේ නැත. |
|
|
| ආලෝකය නිවා දමන්නේ නැත. |
|
|
| ආලෝකය අඳුරුයි. | බැටරිය අඩුයි. | ආලෝකය සම්පූර්ණයෙන්ම ආරෝපණය කරන්න. |
| ආලෝකය ආරෝපණය නොවේ. |
|
|
9. වගකීම් සහ පාරිභෝගික සහාය
Information regarding specific warranty terms and conditions for this product is not available in the provided data. For warranty claims, technical support, or any other inquiries, please contact Tasmor customer service through your purchase platform or the official Tasmor webඅඩවිය.
