1 ආරක්ෂිත තොරතුරු
Read and understand all instructions before operating this heater. Failure to follow these instructions may result in fire, explosion, electric shock, or serious injury.
- වාතාශ්රය: Always ensure adequate ventilation when operating the heater. This unit is designed for use in indoor/outdoor construction and commercial environments where proper ventilation is available.
- ඉන්ධන: Use only Kerosene, #1 and #2 Diesel Fuel, or JP-8 (Jet A Fuel). Do not use gasoline or other volatile fuels.
- ස්ථානගත කිරීම: Position the heater on a stable, level surface. Maintain clear distances from combustible materials as specified in the operating manual.
- මෙහෙයුම: Never leave the heater unattended while burning. Keep children and pets away from the heater.
- ආරක්ෂිත විශේෂාංග: This heater is equipped with a high temperature safety shut-off switch and a photo cad cell flame sensor to ensure safe operation.
2. නිෂ්පාදන අවසන්view
The CRAFTSMAN 80,000 BTU Forced Air Portable Heater is a robust heating solution designed for demanding environments such as garages, workshops, job sites, and farms. It features durable steel construction, a factory-installed thermostat, and the versatility to run on multiple fuel types including kerosene, diesel, and JP-8 without conversion. The unit is capable of heating up to 2,000 square feet.
Figure 1: CRAFTSMAN 80,000 BTU Forced Air Portable Heater, side view.
3. පිහිටුවීම
3.1 ඇසිරීම සහ එකලස් කිරීම
- හීටරය එහි ඇසුරුම් වලින් ප්රවේශමෙන් ඉවත් කරන්න.
- Inspect the unit for any damage. If damaged, do not operate and contact customer service.
- Attach the handle using the provided screws. This is the only assembly required.
Figure 2: Close-up of the heater's handle for portability.
3.2 Fueling the Heater
- Ensure the heater is turned OFF and unplugged before fueling.
- Unscrew the fuel cap located on the top of the fuel tank.
- Fill the tank with clean Kerosene, #1 or #2 Diesel Fuel, or JP-8 (Jet A Fuel). Do not overfill.
- Monitor the fuel gauge to prevent overfilling.
- ඉන්ධන පියන ආරක්ෂිතව ප්රතිස්ථාපනය කරන්න.
Figure 3: Fuel cap location for filling the tank.
Figure 4: Fuel gauge indicating fuel level.
3.3 ස්ථානගත කිරීම සහ බල සම්බන්ධතාවය
- හීටරය ස්ථිර, මට්ටම් මතුපිටක් මත තබන්න.
- Ensure adequate ventilation. This heater is suitable for indoor/outdoor construction and commercial environments with proper air circulation.
- Keep the heater at a safe distance from walls, furniture, and any combustible materials.
- Plug the heater into a properly grounded 110V/120V AC outlet.
4. මෙහෙයුම් උපදෙස්
4.1 Starting the Heater
- Ensure the heater is fueled and properly connected to power.
- Turn the power switch to the 'ON' position. The heater will begin its ignition sequence.
- The photo cad cell flame sensor will detect the flame, and the heater will start producing heat.
Figure 5: Control panel showing the power switch and thermostat dial.
4.2 උෂ්ණත්වය සකස් කිරීම
- Use the thermostat control dial on the control panel to set the desired temperature.
- නියමිත උෂ්ණත්වය පවත්වා ගැනීම සඳහා හීටරය ස්වයංක්රීයව ක්රියාත්මක සහ අක්රිය වේ.
4.3 වසා දැමීම
- Turn the power switch to the 'OFF' position.
- Allow the heater to cool down completely before unplugging or moving.
5. නඩත්තු කිරීම
Regular maintenance ensures optimal performance and longevity of your heater. Always ensure the heater is OFF, unplugged, and cool before performing any maintenance.
- පිරිසිදු කිරීම: Keep the exterior of the heater clean. Use a soft, damp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් භාවිතා නොකරන්න.
- ඉන්ධන පෙරහන: Refer to the owner's manual for instructions on checking and cleaning the fuel filter.
- Split Upper Shell: The unit features a split upper shell design for easy access during maintenance.
- ගබඩා: හීටරය දිගු කාලයක් ගබඩා කරන විට, ඉන්ධන ටැංකිය හිස් බවත් ඒකකය පිරිසිදු හා වියලි බවත් සහතික කර ගන්න. සිසිල් වියළි ස්ථානයක ගබඩා කරන්න.
6. දෝශ නිරාකරණය
If your heater is not operating correctly, consult the following common issues before contacting customer support:
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| තාපකය ආරම්භ නොවේ | No power, no fuel, or safety switch activated. | Check power connection, ensure fuel tank is not empty, reset safety switch if tripped. |
| හීටරය අනපේක්ෂිත ලෙස ක්රියා විරහිත වේ | Overheating, low fuel, or flame sensor issue. | Ensure proper ventilation, refill fuel, clean flame sensor. |
| අසාමාන්ය ගන්ධයක් හෝ දුම | Improper fuel, poor ventilation, or dirty components. | Use correct fuel, increase ventilation, clean unit. |
7. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| වෙළඳ නාමය | ශිල්පී |
| ආදර්ශ අංකය | CMXEHAO80FAK |
| තාප ප්රතිදානය | 80,000 BTU |
| තාපන ආවරණය | වර්ග අඩි 2,000 දක්වා |
| ඉන්ධන වර්ගය | Kerosene, #1 & #2 Diesel Fuel, JP-8 (Jet A Fuel) |
| විශේෂ ලක්ෂණය | Portable, Thermostat Control, Safety Shut-off |
| ඉදිකිරීම් | වානේ |
| නිෂ්පාදන මානයන් | 29"D x 16"W x 17"H |
| අයිතමයේ බර | රාත්තල් 34.1 කි |
| UPC | 089301003323 |
Figure 6: Product dimensions for the portable heater.
8. වගකීම් සහ සහාය
For warranty information, technical support, or to order replacement parts, please refer to the official CRAFTSMAN product manual included with your heater or visit the CRAFTSMAN webඅඩවිය. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.
