GOOLOO GP80 800A Peak SuperSafe Car Jump Starter User Manual

1. හැඳින්වීම

Thank you for choosing the GOOLOO GP80 800A Peak SuperSafe Car Jump Starter. This portable and powerful device is designed to jump start 12V vehicles with up to 4.5L gas engines, and can also serve as a portable power bank for charging various electronic devices. Please read this manual carefully before use to ensure safe and optimal performance.

Image: The GOOLOO GP80 jump starter connected to a car battery, demonstrating its primary function.

2. වැදගත් ආරක්ෂක තොරතුරු

Always observe the following safety precautions when using the GOOLOO GP80 jump starter:

• නෑ immerse the unit in water or expose it to rain.
• නෑ operate the unit if it has been severely damaged or dropped.
• නෑ disassemble the unit. Only qualified service personnel should repair this device.
• නෑ use the jump starter to charge non-rechargeable batteries.
• භාවිතය අතරතුර නිසි වාතාශ්රය සහතික කරන්න.
• දරුවන්ට ළඟා විය නොහැකි ලෙස තබා ගන්න.
• Wear eye protection when working near batteries.
• cl සම්බන්ධ කරන්නamps correctly: Red to Positive (+) සහ Black to Negative (-). Reverse polarity can cause damage.
• Remove the jump starter from the vehicle battery within 30 seconds after the vehicle starts.

3. පැකේජ අන්තර්ගතය

Please check the package contents upon opening. If anything is missing or damaged, contact GOOLOO customer support.

• GOOLOO GP80 Jump Starter
• ස්මාර්ට් ජම්පර් Clamps
• USB-C ආරෝපණ කේබලය
• පරිශීලක අත්පොත
• Storage Case (may vary by package)

Image: The GOOLOO GP80 jump starter unit shown with its smart jumper clamps.

4. නිෂ්පාදන විශේෂාංග සහ සංරචක

Familiarize yourself with the different parts of your GP80 jump starter:

• බල බොත්තම: Turns the unit on/off and activates the flashlight.
• බැටරි මට්ටමේ දර්ශකය: LED lights showing the remaining battery capacity.
• USB Output Port (Quick Charge): ස්මාර්ට්ෆෝන්, ටැබ්ලට් සහ අනෙකුත් USB බලයෙන් ක්‍රියාත්මක වන උපාංග ආරෝපණය කිරීම සඳහා.
• USB-C ආදාන/ප්‍රතිදාන තොට: For charging the jump starter itself or charging other devices.
• 12V ජම්ප් ස්ටාර්ට් පෝට්: Connects to the smart jumper clamps.
• LED ෆ්ලෑෂ් ලයිට්: Provides illumination, with multiple modes (steady, strobe, SOS).

5. Charging the GP80 Jump Starter

Before first use, fully charge the GP80. It is recommended to recharge the unit every 3 months to maintain battery health, even if not used.

1. Connect the provided USB-C charging cable to the USB-C Input/Output port on the GP80.
2. USB-C කේබලයේ අනෙක් කෙළවර USB බිත්ති ඇඩැප්ටරයකට (ඇතුළත් කර නැත) හෝ බල ගැන්වූ USB පෝට් එකකට සම්බන්ධ කරන්න.
3. The battery level indicator lights will illuminate and flash during charging. All lights will be solid when fully charged.

A full charge typically takes 3-4 hours depending on the power source.

6. මෙහෙයුම් උපදෙස්

6.1. වාහනයක් පැනීම ආරම්භ කිරීම

Ensure the GP80 is at least 50% charged before attempting to jump start a vehicle.

1. Connect the Smart Jumper Clamps: Insert the blue plug of the smart jumper clamps into the 12V Jump Start Port on the GP80. Ensure it is fully inserted.
2. Connect to Car Battery:
   • සම්බන්ධ කරන්න රතු (+) clamp කාර් බැටරියේ ධනාත්මක පර්යන්තයට.
   • සම්බන්ධ කරන්න කලු (-) clamp to the negative terminal of the car battery or a solid metal part of the car chassis (unpainted metal).

   ස්මාර්ට් clamps have indicator lights and an audible alarm for safety. Refer to the clamp's manual for specific error codes.
3. වාහනය ආරම්භ කරන්න: වරක් clamps are correctly connected and the smart clamp indicator light is solid green, start your vehicle's engine.
4. Cl ඉවත් කරන්නamps: As soon as the vehicle starts, remove the smart jumper clamps from the car battery first, then disconnect the blue plug from the GP80.

වැදගත්: Do not crank the engine for more than 3 seconds. If the vehicle does not start, wait at least 30 seconds before attempting again. Do not attempt more than 3 consecutive jump starts.

6.2. Charging Mobile Devices

The GP80 can also function as a portable power bank.

1. Connect your device's USB charging cable to either the USB Output Port (Quick Charge) or the USB-C Input/Output Port on the GP80.
2. කේබලයේ අනෙක් කෙලවර ඔබේ ජංගම උපාංගයට සම්බන්ධ කරන්න.
3. The GP80 will automatically begin charging your device.

6.3. LED ෆ්ලෑෂ් ලයිට් භාවිතා කිරීම

The built-in LED flashlight has multiple modes for convenience.

• Press and hold the Power Button for 3 seconds to turn on the flashlight (steady mode).
• Press the Power Button once to switch to Strobe mode.
• Press the Power Button again to switch to SOS mode.
• Press the Power Button once more to turn off the flashlight.

7. නඩත්තු කිරීම

Proper maintenance ensures the longevity of your GP80 jump starter.

• ගබඩා: Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. The ideal storage temperature is between -20°C to 60°C (-4°F to 140°F).
• නැවත ආරෝපණය කිරීම: Recharge the unit at least once every three months to prevent deep discharge and prolong battery life.
• පිරිසිදු කිරීම: ඒකකය පිරිසිදු කිරීම සඳහා මෘදු වියළි රෙද්දක් භාවිතා කරන්න. සැර රසායනික ද්‍රව්‍ය හෝ උල්ෙල්ඛ ද්‍රව්‍ය භාවිතා නොකරන්න.
• බැටරි සත්කාර: Avoid fully discharging the battery frequently. Charge it when the battery indicator shows 2-3 bars.

8. දෝශ නිරාකරණය

9. පිරිවිතර

10. වගකීම් සහ සහාය

GOOLOO products come with a standard warranty. For detailed warranty information, product registration, or technical support, please visit the official GOOLOO webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔවුන්ගේ පාරිභෝගික සේවා කණ්ඩායම අමතන්න. මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

GOOLOO Official Webඅඩවිය: www.gooloo.com

පාරිභෝගික සේවා විද්‍යුත් තැපෑල: support@gooloo.com