Aerocool Trinity Mini TRINITYMINIBKV2 Mini ATX Tower Case User Manual

1. හැඳින්වීම

This manual provides detailed instructions for the installation, operation, and maintenance of your Aerocool Trinity Mini TRINITYMINIBKV2 Mini ATX Tower Case. This compact PC case features a tempered glass side panel and pre-installed FRGB fans, designed for Micro ATX and Mini ITX motherboards. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

Figure 1: Aerocool Trinity Mini TRINITYMINIBKV2 PC Case. This image shows the front and side view of the black PC case, highlighting the tempered glass panel and the illuminated FRGB fans.

2 ආරක්ෂිත තොරතුරු

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the PC case.
• Handle the tempered glass side panel with extreme care. Tempered glass can shatter if dropped or struck with force.
• Avoid exposing the case to extreme temperatures, high humidity, or direct sunlight.
• Keep all small parts, screws, and accessories out of reach of children.
• අධික උනුසුම් වීම වැළැක්වීම සඳහා පරිගණක කේස් එක වටා නිසි වාතාශ්‍රයක් සහතික කරන්න.
• නඩුව හෝ එහි සංරචක වෙනස් කිරීමට උත්සාහ නොකරන්න, මෙය ඔබගේ වගකීම් අවලංගු කළ හැකි අතර ආරක්ෂිත අවදානමක් ඇති කළ හැකිය.

3. පැකේජ අන්තර්ගතය

පහත ලැයිස්තුගත කර ඇති සියලුම අයිතම ඔබේ පැකේජයේ ඇති බව තහවුරු කරගන්න:

• Aerocool Trinity Mini TRINITYMINIBKV2 PC Case (Black)
• Pre-installed FRGB Fans (2x 12cm front, 1x 12cm rear)
• Accessory Kit (various screws, motherboard standoffs, cable ties)
• පරිශීලක අත්පොත (මෙම ලේඛනය)

4. පිරිවිතර

5. සැකසුම් සහ ස්ථාපන මාර්ගෝපදේශය

Follow these steps to install your PC components into the Aerocool Trinity Mini TRINITYMINIBKV2 case.

5.1. නඩුව සකස් කිරීම

1. නඩුව පැතලි, ස්ථාවර මතුපිටක් මත තබන්න.
2. Carefully remove the tempered glass side panel by unscrewing the thumbscrews at the rear of the case. Set the panel aside on a soft, non-abrasive surface.
3. Remove the opposite steel side panel by unscrewing its thumbscrews and sliding it backward.

5.2. මවු පුවරු ස්ථාපනය

1. I/O පලිහ (ඔබේ මවු පුවරුවේ පෙර ස්ථාපනය කර නොමැති නම්) නඩුවේ පසුපස විවරයට ස්ථාපනය කරන්න.
2. Align your Micro ATX or Mini ITX motherboard with the pre-installed standoffs inside the case. Ensure the screw holes on the motherboard match the standoffs.
3. Secure the motherboard using the appropriate screws from the accessory kit. Do not overtighten.

5.3. Storage Drive Installation (HDDs/SSDs)

The case supports various storage configurations. Refer to the case interior for specific drive bay locations.

1. For 3.5" HDDs: Slide the drive into the designated drive cage bays and secure with screws.
2. For 2.5" SSDs: Mount the SSDs onto the dedicated mounting points, typically behind the motherboard tray or on top of the PSU shroud, and secure with screws.

5.4. බල සැපයුම් ඒකකය (PSU) ස්ථාපනය

1. Position your PSU into the bottom-mounted PSU shroud area.
2. Align the PSU with the screw holes at the rear of the case.
3. Secure the PSU using the four screws provided in your PSU's accessory kit or the case's accessory kit.

5.5. Fan and Cooling System Installation

The case comes with two 12cm FRGB fans pre-installed at the front and one 12cm FRGB fan at the rear. These fans provide fixed RGB lighting effects.

• Additional Fans: The case supports additional fans at the top. Refer to the product specifications for maximum fan sizes and quantities.
• ද්‍රව සිසිලනය: Radiators can be installed at the front or top of the case, depending on size. Ensure proper clearance with other components.
• Connect all fan power cables to appropriate headers on your motherboard or a fan controller.

5.6. කේබල් කළමනාකරණය

Effective cable management improves airflow and aesthetics.

• Route cables through the cutouts and grommets behind the motherboard tray.
• Use the included cable ties to bundle and secure cables, keeping them tidy and out of the main airflow path.
• Connect all necessary power cables from the PSU to the motherboard, GPU, and storage drives.
• Connect the front panel I/O cables (USB 3.0, USB 2.0, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to their respective headers on the motherboard. Refer to your motherboard manual for correct pin assignments.

5.7. අවසාන එකලස් කිරීම

1. Once all components are installed and cables are managed, reattach the steel side panel and secure it with thumbscrews.
2. Carefully reattach the tempered glass side panel and secure it with its thumbscrews.

6. මෙහෙයුම් උපදෙස්

6.1. බල ගැන්වීම / අක්රිය කිරීම

• බල ගැන්වීම: Press the power button located on the top front panel of the case.
• විදුලිය විසන්ධි කිරීම: Initiate a shutdown from your operating system. Alternatively, press and hold the power button for several seconds for a forced shutdown (not recommended for regular use).
• නැවත සකසන්න: Press the reset button on the top front panel to restart the system.

6.2. FRGB Fan Operation

The pre-installed fans feature Fixed RGB (FRGB) lighting. This means the fans display a fixed spectrum of colors and do not offer customizable lighting effects or synchronization with motherboard RGB software. The lighting will activate automatically when the fans receive power.

7. නඩත්තු කිරීම

නිතිපතා නඩත්තු කිරීම ඔබේ පරිගණක සංරචකවල ප්‍රශස්ත ක්‍රියාකාරිත්වය සහ කල්පැවැත්ම සහතික කිරීමට උපකාරී වේ.

• දූවිලි පෙරහන්: Periodically check and clean any removable dust filters (e.g., at the front, top, or bottom of the case). Use compressed air or rinse with water (ensure completely dry before reinstallation).
• Case Exterior: මෘදු, d සමග බාහිර පෘෂ්ඨයන් පිස දමන්නamp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්‍රාවක වලින් වළකින්න.
• රසිකයින්: Use compressed air to gently clean dust from fan blades. Do not attempt to lubricate or disassemble the fans.
• අභ්‍යන්තර පිරිසිදු කිරීම: With the power off and unplugged, use compressed air to remove dust buildup from internal components.

8. දෝශ නිරාකරණය

ඔබට ගැටළු ඇති වුවහොත්, පහත පොදු දෝශ නිරාකරණ පියවර වෙත යොමු වන්න:

• බලය නැත:
  • Ensure the PSU is switched on at the back.
  • මවු පුවරුවට සහ සංරචක වලට ඇති සියලුම බල සම්බන්ධතා පරීක්ෂා කරන්න.
  • Verify front panel power switch cables are correctly connected to the motherboard.
• විදුලි පංකා කැරකෙන්නේ නැත / RGB ක්‍රියා නොකරයි:
  • Check fan power connections to the motherboard or fan controller.
  • Ensure FRGB fans are receiving power. Remember, FRGB lighting is fixed and not software controllable.
• අධික උනුසුම් වීම:
  • Ensure all fans are spinning correctly and are oriented for proper airflow (intake/exhaust).
  • ඕනෑම දූවිලි පෙරහන් සහ අභ්‍යන්තර සංරචක පිරිසිදු කරන්න.
  • Verify adequate space around the case for ventilation.
• Front Panel USB/Audio Not Working:
  • Check that the USB 3.0, USB 2.0, and HD Audio cables from the front panel are securely connected to the correct headers on your motherboard.

9. වගකීම් සහ සහාය

For warranty information and technical support, please refer to the official AeroCool webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔබේ සිල්ලර වෙළෙන්දා අමතන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

AeroCool Official Webඅඩවිය: www.aerocool.io