හැඳින්වීම
This manual provides comprehensive instructions for the installation, operation, and maintenance of the HID Signo 40 40TKS-00-000000 Multi-Technology, Mobile Ready Smart Card Reader. The Signo 40 is designed for secure electronic access control, offering versatility and advanced connectivity for various credential technologies.
ආරක්ෂිත තොරතුරු
Please read all safety instructions before installing or operating the device. Failure to follow these instructions may result in injury, damage to the device, or void the warranty.
- ස්ථාපනය හෝ නඩත්තු කිරීමට පෙර විදුලිය විසන්ධි කර ඇති බවට සහතික වන්න.
- ස්ථාපනය සිදු කළ යුත්තේ සුදුසුකම් ලත් පුද්ගලයින් විසින් පමණි.
- උපාංගය අධික උෂ්ණත්වයන්, තෙතමනය හෝ විඛාදන පරිසරයන්ට නිරාවරණය නොකරන්න.
- Use only approved accessories and power supplies.
පැකේජයේ අන්තර්ගතය
සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:
- HID Signo 40 Smart Card Reader
- දෘඩාංග සවිකිරීම (ඉස්කුරුප්පු, නැංගුරම්)
- ස්ථාපන මාර්ගෝපදේශය (මෙම ලේඛනය)
සැකසුම සහ ස්ථාපනය
The HID Signo 40 reader is designed for wall switch mounting applications. Follow these steps for proper installation:
1. Mounting the Reader
- Choose a suitable location for wall switch mounting.
- Secure the mounting plate (if applicable) to the wall using the provided hardware.
- Attach the reader securely to the mounting plate or directly to the wall box.
Image: The HID Signo 40 Smart Card Reader, typically mounted on a wall for access control. This image shows the sleek design suitable for wall switch applications.
2. රැහැන් සම්බන්ධතා
The Signo 40 features a terminal strip wiring option for secure and reliable connections.
- Refer to the wiring diagram provided with the reader for specific pin assignments.
- Connect power, data (OSDP), and any auxiliary inputs/outputs to the terminal strip.
- සියලුම සම්බන්ධතා ආරක්ෂිත සහ පරිවරණය කර ඇති බවට සහතික වන්න.
3. මූලික බලගැන්වීම සහ වින්යාසය
Once wired, apply power to the reader. The reader will perform a self-test. For advanced configuration, including OSDP settings and credential profiles, refer to the HID Signo Configuration Guide available on the HID Global webඅඩවිය.
මෙහෙයුම් උපදෙස්
The HID Signo 40 reader supports a wide range of credential technologies.
1. Presenting Credentials
- Physical Cards/Fobs: Present your compatible smart card or fob directly to the reader's surface.
- Mobile Devices (HID Mobile Access): Ensure your mobile device has HID Mobile Access enabled via Bluetooth or NFC. Present the device near the reader.
- Apple Wallet (ECP): For credentials stored in Apple Wallet, ensure Enhanced Contactless Polling (ECP) is active on your device and present it to the reader.
The reader will indicate a successful read (e.g., LED indicator change, audible beep) if the credential is valid.
2. Read Range Optimization
The Signo 40 features surface detection for automatic recalibration and optimization of read range performance. This ensures consistent and reliable credential reading.
නඩත්තු කිරීම
The HID Signo 40 reader is designed for minimal maintenance.
- පිරිසිදු කිරීම: Use a soft, dry cloth to clean the reader's surface. Avoid abrasive cleaners or solvents.
- ස්ථිරාංග යාවත්කාලීන කිරීම්: The reader is designed for remote management, allowing for firmware updates without physical interaction. Consult your system administrator or HID Global documentation for details on remote updates.
- පරීක්ෂාව: Periodically inspect the reader and its connections for any signs of damage or wear.
දෝෂගවේෂණය
If you encounter issues with your HID Signo 40 reader, consider the following:
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Reader not powering on. | බල සැපයුමක් නැත හෝ වැරදි රැහැන් ඇදීම. | බල සම්බන්ධතා පරීක්ෂා කර නිවැරදි පරිමාව සහතික කරන්න.tage. Verify wiring to the terminal strip. |
| Credential not recognized. | Invalid credential, incorrect presentation, or reader configuration issue. | Ensure the credential is valid and compatible. Present the credential correctly. Consult system administrator for reader configuration. |
| Short read range. | Environmental interference or reader recalibration needed. | Ensure no metallic objects are interfering with the reader. The reader should automatically recalibrate; if not, check for obstructions. |
For persistent issues, contact HID Global technical support or your system integrator.
පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| නිෂ්පාදන මානයන් | අඟල් 7.2 x 4.84 x 1.73 |
| අයිතමයේ බර | අවුන්ස 12 කි |
| නිෂ්පාදකයා | HID |
| ආදර්ශ අංකය | Signo 40 |
| සම්බන්ධතාවය | Bluetooth, NFC, OSDP |
| අක්තපත්ර සහාය | Cards, Fobs, Mobile Devices (HID Mobile Access, Apple ECP) |
| රැහැන් ඇදීම | පර්යන්ත තීරුව |
වගකීම් සහ සහාය
HID Global products are backed by a limited warranty. For specific warranty terms and conditions, please refer to the official HID Global webවෙබ් අඩවියට හෝ ඔබේ මිලදී ගැනීමේ ස්ථානය අමතන්න.
For technical assistance, product support, or to report issues, please visit the HID Global Support Portal or contact your authorized HID Global distributor.
