Joysway J4C05 Transmitter and J5C01R Receiver Instruction Manual

1. හැඳින්වීම

Welcome to the instruction manual for your Joysway J4C05 4-channel transmitter and J5C01R 5-channel receiver. This system operates in Mode 2, which is standard for many RC applications, providing intuitive control over your model. Please read this manual thoroughly before operating your equipment to ensure safe and efficient use.

ආරක්ෂිත පූර්වාරක්ෂාවන්: Always operate your RC equipment responsibly. Ensure batteries are charged, perform pre-flight checks, and be aware of your surroundings. Keep the equipment away from moisture, extreme temperatures, and direct sunlight.

An image showing the black Joysway J4C05 4-channel transmitter on the left and the smaller black J5C01R 5-channel receiver on the right, connected by a wire. The transmitter features two control sticks, various switches, and a 2.4GHz FHSS label. The receiver has multiple ports for connecting servos and other components.

2. සංරචක අවසන්view

2.1 පැකේජයේ අන්තර්ගතය

• Joysway J4C05 4-Channel Transmitter (Mode 2)
• Joysway J5C01R 5-Channel Receiver
• උපදෙස් අත්පොත

2.2 Transmitter (J4C05) Features

The J4C05 is a 4-channel 2.4GHz FHSS (Frequency Hopping Spread Spectrum) transmitter designed for reliable control. It operates in Mode 2, meaning the left stick controls throttle and rudder, while the right stick controls aileron and elevator.

• පාලන කූරු: Two proportional sticks for primary flight controls.
• Trim Levers: Fine-tuning adjustments for each primary control channel.
• ස්විච: Auxiliary switches for additional functions (e.g., gear, flaps, depending on model setup).
• බල දර්ශකය: LED to show power status.

2.3 Receiver (J5C01R) Features

The J5C01R is a compact 5-channel 2.4GHz FHSS receiver designed to pair seamlessly with the J4C05 transmitter. It provides multiple ports for connecting servos, Electronic Speed Controllers (ESCs), and other accessories.

• නාලිකා: 5 output channels for various control surfaces and functions.
• BIND බොත්තම: Used for pairing the receiver with the transmitter.
• LED දර්ශකය: Shows binding status and signal reception.

3. පිහිටුවීම

3.1 බැටරි ස්ථාපනය (සම්ප්‍රේෂකය)

1. Locate the battery compartment on the back of the J4C05 transmitter.
2. ස්ලයිඩයෙන් බැටරි කවරය විවෘත කරන්න.
3. Insert the required number of AA batteries (typically 4) according to the polarity markings (+/-).
4. බැටරි කවරය ආරක්ෂිතව වසා දමන්න.

3.2 සම්ප්‍රේෂකය සහ ග්‍රාහකය බැඳීම

Binding is the process of electronically linking the transmitter and receiver so they communicate exclusively with each other.

1. Ensure the transmitter is turned OFF.
2. Connect a power source (e.g., ESC with BEC, or a separate receiver battery) to the J5C01R receiver.
3. Press and hold the BIND button on the J5C01R receiver while powering it ON. The receiver's LED should flash rapidly.
4. While the receiver LED is flashing, turn ON the J4C05 transmitter.
5. The receiver's LED should turn solid, indicating a successful bind.
6. Turn OFF both the transmitter and receiver, then turn them ON again in the normal sequence (transmitter first, then receiver) to confirm the bind.

3.3 Connecting Servos and ESC

Connect your servos and Electronic Speed Controller (ESC) to the appropriate channels on the J5C01R receiver. Ensure correct polarity (signal, positive, negative).

4. මෙහෙයුම් උපදෙස්

4.1 ගුවන් ගමන් පූර්ව පරීක්ෂාවන්

එක් එක් මෙහෙයුමට පෙර, පහත සඳහන් පරීක්ෂාවන් සිදු කරන්න:

• Ensure both transmitter and receiver batteries are fully charged.
• Verify that all control surfaces (ailerons, elevator, rudder) move correctly and in the proper direction in response to stick inputs.
• ආරක්ෂාව සඳහා සියලු සම්බන්ධතා පරීක්ෂා කරන්න.
• Confirm that the throttle stick is at its lowest position before powering on the model.

4.2 Basic Control (Mode 2)

• වම් සැරයටිය (ත්‍රොට්ල්/රඩ්ඩර්):
      සිරස් චලනය: Controls throttle (up for more power, down for less).
      තිරස් චලනය: Controls rudder (left for left yaw, right for right yaw).
• දකුණු සැරයටිය (අයිලරෝන්/සෝපානය):
      සිරස් චලනය: Controls elevator (up for nose up, down for nose down).
      තිරස් චලනය: Controls aileron (left for left roll, right for right roll).

4.3 Trim Adjustments

Trim levers are used to make small, precise adjustments to the neutral position of your control surfaces. If your model drifts without stick input, use the corresponding trim lever to correct it. For example, if the model drifts left, apply right aileron trim until it flies straight.

4.4 Range Testing

Before operating your model at a distance, perform a range test to ensure proper signal integrity. Consult your model's specific manual for detailed range testing procedures, as they can vary.

5. නඩත්තු කිරීම

5.1 පිරිසිදු කිරීම

Wipe the transmitter and receiver with a soft, dry cloth. Do not use solvents or abrasive cleaners, as they may damage the plastic or electronics. Avoid getting moisture into the units.

5.2 ගබඩා කිරීම

When not in use, store the transmitter and receiver in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries from the transmitter if storing for extended periods to prevent leakage.

5.3 බැටරි සත්කාර

Always use fresh, good quality batteries. Replace batteries when the power indicator shows low voltage. Dispose of used batteries responsibly according to local regulations.

6. දෝශ නිරාකරණය

If you encounter issues with your Joysway J4C05/J5C01R system, refer to the table below for common problems and their solutions.

7. පිරිවිතර

7.1 තාක්ෂණික පිරිවිතර

• නිෂ්පාදන ආකෘතිය: JY881155
• ASIN: B08X178V14
• පළමු ලබා ගත හැකි දිනය: 15 පෙබරවාරි 2022

Transmitter (J4C05)

• නාලිකා: 4
• සංඛ්යාතය: 2.4GHz FHSS
• මාදිලිය: 2 (Left stick: Throttle/Rudder; Right stick: Aileron/Elevator)
• බල සැපයුම: 4 x AA බැටරි (ඇතුළත් කර නැත)

Receiver (J5C01R)

• නාලිකා: 5
• සංඛ්යාතය: 2.4GHz FHSS
• බල සැපයුම: 4.8V - 6V (typically from ESC BEC or receiver battery)

8. වගකීම් සහ සහාය

8.1 වගකීම් තොරතුරු

Joysway products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or contact your point of purchase. Keep your proof of purchase for any warranty claims.

8.2 පාරිභෝගික සහාය

If you require further assistance or have questions not covered in this manual, please visit the official Joysway webවෙබ් අඩවියෙන් හෝ ඔවුන්ගේ පාරිභෝගික සහාය දෙපාර්තමේන්තුව අමතන්න. සම්බන්ධතා තොරතුරු සාමාන්‍යයෙන් නිෂ්පාදන ඇසුරුම්කරණයේ හෝ නිෂ්පාදකයාගේ webඅඩවිය.