ASHCROFT 50EI60R ද්වි-ලෝහමය ඩයල් උෂ්ණත්වමාන පරිශීලක අත්පොත

හැඳින්වීම

This manual provides essential instructions for the proper installation, operation, and maintenance of your ASHCROFT 50EI60R Bi-Metallic Dial Thermometer. Please read this manual thoroughly before using the device to ensure safe and efficient performance.

නිෂ්පාදනය අවසන්view

The ASHCROFT 50EI60R is a robust bi-metallic dial thermometer designed for accurate temperature measurement. It features a durable stainless steel case and an analog display for clear readings.

රූපය 1: ASHCROFT 50EI60R Bi-Metallic Dial Thermometer. This image displays the front face of the thermometer, featuring a clear dial with both Fahrenheit and Celsius scales. The needle indicates a temperature reading. The robust stainless steel casing is visible, along with the stem extending from the back.

ඇතුළත් සංරචක:

• ASHCROFT Bi-Metallic Dial Thermometer with Stainless Steel Case

සැලසුම

1. ඇසිරීම: Carefully remove the thermometer from its packaging. Inspect for any signs of damage during transit.
2. ස්ථානගත කිරීම: Position the thermometer in the desired measurement location. Ensure the stem is fully immersed in the medium (liquid or gas) whose temperature is to be measured, up to the sensing area.
3. සවි කිරීම (අදාළ නම්): If the thermometer is designed for panel or pipe mounting, secure it firmly using appropriate fittings (not included unless specified).
4. පාරිසරික සලකා බැලීම්: Avoid placing the thermometer in direct sunlight or near heat sources that could affect the accuracy of the ambient temperature reading if measuring air temperature.

මෙහෙයුම් උපදෙස්

The ASHCROFT 50EI60R is an analog thermometer that provides direct temperature readings.

1. සංදර්ශකය කියවීම: Observe the needle on the dial. The thermometer features both Fahrenheit (°F) and Celsius (°C) scales. Read the temperature indicated by the needle on the appropriate scale.
2. ස්ථාවර කිරීමේ කාලය: Allow sufficient time for the thermometer to stabilize and provide an accurate reading, especially when moving it between environments with different temperatures.
3. නිරවද්යතාව: For critical measurements, ensure the thermometer is calibrated periodically according to industry standards.

නඩත්තු කිරීම

නිසි නඩත්තුව ඔබේ උෂ්ණත්වමානයේ ආයු කාලය සහ නිරවද්‍යතාවය සහතික කරයි.

• පිරිසිදු කිරීම: Wipe the thermometer clean with a soft, damp cloth as needed. Avoid abrasive cleaners or solvents that could damage the casing හෝ සංදර්ශකය.
• පරීක්ෂාව: Periodically inspect the thermometer for any physical damage, such as dents in the casing or a bent stem, which could affect its performance.
• ගබඩා: When not in use, store the thermometer in a clean, dry environment, protected from extreme temperatures and physical shock.

දෝෂගවේෂණය

ඔබේ උෂ්ණත්වමානය සමඟ ගැටළු ඇති වුවහොත්, පහත සඳහන් කරුණු සලකා බලන්න:

• වැරදි කියවීම්:
  • Ensure the thermometer stem is fully immersed in the medium being measured.
  • Verify that the thermometer has had sufficient time to stabilize to the temperature of the medium.
  • Check for external heat sources or direct sunlight affecting the thermometer.
  • If persistent inaccuracy is observed, the thermometer may require calibration or replacement.
• භෞතික හානි: If the thermometer is physically damaged (e.g., bent stem, cracked dial), its accuracy and functionality may be compromised. Replacement is recommended.

පිරිවිතර

වගකීම් සහ සහාය

For detailed warranty information and technical support, please refer to the documentation included with your product or visit the official ASHCROFT webඅඩවිය.

ASHCROFT Official Webඅඩවිය: www.ashcroft.com