MOUNTUP MU0034 Single Monitor Desk Mount Instruction Manual

1. හැඳින්වීම

This manual provides detailed instructions for the installation, operation, and maintenance of your MOUNTUP MU0034 Single Monitor Desk Mount. Please read this manual thoroughly before installation to ensure correct setup and safe operation. This monitor mount is designed to enhance your workspace ergonomics by providing adjustable positioning for a single monitor.

2 ආරක්ෂිත තොරතුරු

• Ensure all components are present and undamaged before installation. Do not use if any parts are missing or faulty.
• This product is intended for monitors weighing up to 17.6 lbs (8 kg) and screen sizes from 17 to 32 inches. Do not exceed the maximum weight capacity.
• Compatible VESA patterns are 75x75mm and 100x100mm. Verify your monitor's VESA pattern before proceeding.
• Ensure the desk surface is stable and strong enough to support the combined weight of the mount and monitor.
• Tighten all screws firmly, but do not overtighten to avoid stripping threads or damaging components.
• ස්ථාපනය අතරතුර ළමුන් සහ සුරතල් සතුන් ඈත් කර තබන්න.
• If you have any doubts about the installation process, consult a qualified professional.

3. පැකේජ අන්තර්ගතය

කරුණාකර ඔබගේ පැකේජයේ සියලුම කොටස් ඇතුළත් කර ඇති බව තහවුරු කරගන්න:

• මොනිටර් බාහු එකලස් කිරීම
• මේසය Clamp පදනම
• ග්‍රෝමට් මූලික සංරචක
• වීසා තහඩුව
• දෘඩාංග කට්ටලය (ඉස්කුරුප්පු, රෙදි සෝදන යන්ත්‍ර, ඇලන් යතුරු)
• උපදෙස් අත්පොත

4. පිරිවිතර

5. පිහිටුවීම සහ ස්ථාපනය

The MOUNTUP MU0034 offers two installation options: C-clamp mounting and Grommet mounting. Choose the method suitable for your desk.

5.1. සී-ක්ලෝරයිඩ්amp සවි කිරීම

This method is for desks without existing grommet holes, or if you prefer clamping to the edge of your desk. Ensure your desk thickness is no more than 3.35 inches.

1. C-cl එක අමුණන්නamp: Assemble the C-clamp components to the base of the monitor arm. Position the base on the edge of your desk and tighten the clamp screw until it is secure.
2. නිරීක්ෂණය කිරීමට VESA තහඩුව අමුණන්න: Secure the VESA plate to the back of your monitor using the appropriate screws from the hardware kit. Ensure the screws are tightened securely.
3. Slide Monitor onto Arm: Carefully slide the monitor (with the attached VESA plate) onto the monitor arm's VESA head. Ensure it clicks into place or is secured with the provided locking mechanism.
4. ආතතිය සකසන්න: Refer to Section 6.1 for adjusting the gas spring tension to match your monitor's weight.

Figure 1: Illustration of C-clamp and Grommet mounting options. The C-clamp is shown securing the mount to the desk edge, while the grommet mount uses a desk hole.

Figure 2: The removable VESA plate being attached to the back of a monitor, then sliding onto the monitor arm for easier installation.

5.2. Grommet සවි කිරීම

This method utilizes an existing hole in your desk. Ensure your desk thickness is no more than 3.35 inches and the grommet hole diameter is between 0.39 and 3.1 inches.

1. ග්‍රෝමට් පදනම එකලස් කරන්න: Insert the grommet base components through the desk hole and secure them from underneath the desk using the provided plate and nut.
2. නිරීක්ෂණය කිරීමට VESA තහඩුව අමුණන්න: Secure the VESA plate to the back of your monitor using the appropriate screws from the hardware kit. Ensure the screws are tightened securely.
3. Slide Monitor onto Arm: Carefully slide the monitor (with the attached VESA plate) onto the monitor arm's VESA head. Ensure it clicks into place or is secured with the provided locking mechanism.
4. ආතතිය සකසන්න: Refer to Section 6.1 for adjusting the gas spring tension to match your monitor's weight.

6. මෙහෙයුම් සහ ගැලපීම්

The MOUNTUP MU0034 monitor arm offers various adjustments for optimal viewසැනසිල්ල.

6.1 ගෑස් වසන්ත ආතති ගැලපීම

The gas spring tension needs to be adjusted to match the weight of your monitor. This ensures the monitor stays in position once adjusted.

• If the monitor drifts down, turn the adjustment screw (usually located on the arm joint) clockwise ("+") to increase tension.
• If the monitor floats up, turn the adjustment screw counter-clockwise ("-") to decrease tension.
• Adjust gradually until the monitor remains stable at any height.

Figure 3: Instructions for adjusting the gas spring tension using an Allen key. Turning clockwise increases tension, counter-clockwise decreases it.

6.2. උස ගැලපීම

Once the gas spring tension is correctly set, you can easily raise or lower your monitor to your desired ergonomic height. The arm allows for up to 11 inches of vertical adjustment.

Figure 4: Diagram illustrating the maximum height adjustment of 11 inches and maximum extension of 17.5 inches.

6.3. Tilt, Swivel, and Rotation

The monitor arm provides full motion capabilities:

• ඇලවීම: Adjust the monitor screen +45° to -45° to reduce glare or find a comfortable viewing කෝණය.
• කරකැවීම: The arm can swivel 360° at the base and 360° at the middle joint. The monitor plate itself can swivel 180°. This allows for easy screen sharing or repositioning.
• භ්රමණය: භූ දර්ශන සහ ආලේඛ්‍ය දිශානති අතර මාරු වීමට මොනිටරය 360° කරකවන්න.

Figure 5: Visual representation of the monitor arm's full motion capabilities, including 360° swivel, 180° swivel at the monitor plate, and +45° to -45° tilt.

Figure 6: An image demonstrating the monitor's ability to rotate 360 degrees, allowing for both landscape and portrait viewing මාදිලි.

7. කේබල් කළමනාකරණය

The MOUNTUP MU0034 features integrated cable management to keep your workspace tidy.

1. Route your monitor cables (power, video, etc.) along the underside of the arm.
2. Use the provided cable clips or covers to secure the cables within the arm channels.
3. ආතතියකින් තොරව සම්පූර්ණ පරාසයක චලනයකට ඉඩ සැලසීමට කේබල් ප්‍රමාණවත් ස්ලැක් ඇති බවට වග බලා ගන්න.

Figure 7: Illustration of how cables are routed and organized through the integrated channels on the monitor arm, keeping the desk clear.

8. නඩත්තු කිරීම

• සියලුම ඉස්කුරුප්පු සහ සම්බන්ධතා තදින් පවතින බව සහතික කිරීම සඳහා නිතිපතා පරීක්ෂා කරන්න.
• මෘදු, d තුණ්ඩයකින් කන්ද පිරිසිදු කරන්න.amp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්‍රාවක වලින් වළකින්න.
• Do not lubricate the gas spring mechanism.

9. දෝශ නිරාකරණය

10. වගකීම් සහ සහාය

The MOUNTUP MU0034 Single Monitor Desk Mount is backed by a 3-year support period. For technical assistance, missing parts, or warranty claims, please contact MOUNTUP customer support through their official channels or the retailer where the product was purchased.

වගකීම් අරමුණු සඳහා කරුණාකර ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.