Pro-Ject Debut RecordMaster II Turntable with USB (OM5e)

1. හැඳින්වීම

The Pro-Ject Debut RecordMaster II is a high-fidelity turntable designed for an enhanced vinyl listening experience and digital conversion. This model features a pre-mounted OM5e cartridge, a built-in switchable phono preamplifier, and a USB output for direct connection to a PC or Mac. It incorporates a belt drive system with a low-noise AC motor, TPE decoupling, and a DC-driven AC generator for stable speed. Electronic speed change allows for playback at 33, 45, and 78 RPM, with a simple stylus exchange (OM78, not included) and drive belt adjustment required for 78 RPM.

This manual provides essential information for the proper setup, operation, and maintenance of your turntable to ensure optimal performance and longevity.

2. ආරක්ෂිත උපදෙස්

• භාවිතයට පෙර සියලු උපදෙස් ප්රවේශමෙන් කියවන්න.
• Keep the turntable away from water, moisture, and direct sunlight.
• Do not place the turntable near heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
• නිෂ්පාදකයා විසින් නිශ්චිතව දක්වා ඇති ඇමුණුම්/උපාංග පමණක් භාවිතා කරන්න.
• අකුණු කුණාටු ඇති වන විට හෝ දිගු කාලයක් භාවිතා නොකළ විට හැරවුම් මේසය විසන්ධි කරන්න.
• සියලුම සේවා සුදුසුකම් ලත් සේවා පුද්ගලයින් වෙත යොමු කරන්න.
• ඒකකය වටා නිසි වාතාශ්රය සහතික කරන්න.

3. පැකේජ අන්තර්ගතය

පහත ලැයිස්තුගත කර ඇති සියලුම අයිතම ඔබේ පැකේජයට ඇතුළත් කර ඇති බව තහවුරු කරගන්න:

• Pro-Ject Debut RecordMaster II Turntable with pre-mounted OM5e cartridge
• Connect it RCA Cable
• දූවිලි ආවරණය
• Adapter for 7-inch singles
• බල සැපයුම

4. සැකසුම් මාර්ගෝපදේශය

Follow these steps to set up your Pro-Ject Debut RecordMaster II turntable:

4.1 ඇසිරීම සහ ස්ථානගත කිරීම

Carefully remove all components from the packaging. Place the turntable on a stable, level surface away from vibrations and direct heat sources. Ensure adequate space for the dustcover to open fully.

රූපය 1: ඉහළ-පහළ view of the Pro-Ject Debut RecordMaster II Turntable.

4.2 තහඩු සහ පටි සවි කිරීම

1. තැටිය ස්පින්ඩලය මත තබන්න.
2. Carefully loop the drive belt around the motor pulley and the inner rim of the platter.

4.3 Tonearm Balance and Tracking Force

The turntable comes with a pre-mounted OM5e cartridge. Refer to the cartridge manufacturer's instructions for precise tracking force and anti-skating settings. Generally, balance the tonearm until it floats freely, then set the tracking force using the counterweight.

Figure 2: Close-up of the tonearm, showing the Pro-Ject branding.

4.4 ශ්‍රව්‍ය පද්ධතියකට සම්බන්ධ වීම

The Debut RecordMaster II features a built-in switchable phono preamplifier and USB output. You can connect it to a line-level input on your hi-fi system or directly to a PC/Mac via USB.

• RCA සම්බන්ධතාවය: Use the supplied RCA cable to connect the turntable's output to an available line-level input (e.g., AUX, CD) on your amplifier or receiver. Ensure the phono preamplifier switch on the turntable is set to 'Line Out' if connecting to a line-level input, or 'Phono Out' if connecting to an amplifier with a dedicated phono input.
• USB සම්බන්ධතාවය: Connect the turntable to your computer using a USB cable (not included). This allows for digital recording of your vinyl.

Figure 3: Turntable integrated into a home audio setup with speakers.

Figure 4: Turntable connected to a laptop, demonstrating USB recording capability.

4.5 Dustcover Installation

Attach the dustcover hinges to the designated slots on the rear of the turntable. The dustcover protects the turntable from dust and debris when not in use.

5. මෙහෙයුම් උපදෙස්

5.1 බල ගැන්වීම සක්‍රිය / අක්‍රිය කිරීම

Locate the power switch, typically on the underside or rear of the plinth. Turn the switch to the 'On' position to power the turntable. Turn it 'Off' when not in use.

Figure 5: Detail of the power switch for the turntable.

5.2 වේග තේරීම

The turntable supports 33, 45, and 78 RPM playback. Use the electronic speed change function to select the appropriate speed for your record. For 78 RPM records, a specific OM78 stylus (not included) and a drive belt turnover to a larger diameter of the pulley are required.

5.3 වාර්තාවක් වාදනය කිරීම

1. තැටිය මත වාර්තාවක් තබන්න.
2. Ensure the correct playback speed is selected.
3. Raise the tonearm using the tonearm lift lever.
4. පටිගත කිරීමේ අපේක්ෂිත ආරම්භක කට්ට මතින් ස්වර බාහුව මෘදු ලෙස ගෙන යන්න.
5. Slowly lower the tonearm using the lift lever. The stylus will descend onto the record and playback will begin.

5.4 නැවත ධාවනය නැවැත්වීම

1. Raise the tonearm using the tonearm lift lever.
2. Move the tonearm back to its rest position.
3. Lower the tonearm onto its rest using the lift lever.
4. Turn off the turntable.

5.5 USB පටිගත කිරීම

To record vinyl to your PC/Mac, connect the turntable via USB. Use appropriate audio recording software (not included) on your computer to capture the audio signal. Ensure the turntable's phono preamplifier is set to 'Line Out' for USB recording.

6. නඩත්තු කිරීම

6.1 ස්ටයිලස් පිරිසිදු කිරීම

Regularly clean the stylus using a soft brush or a dedicated stylus cleaning fluid. Brush gently from back to front to remove dust and debris.

6.2 පිරිසිදු කිරීමේ වාර්තා

Use a carbon fiber brush or a record cleaning solution to keep your vinyl records free of dust and static. Clean records before each play to minimize wear on the stylus and improve sound quality.

6.3 Dustcover Care

Clean the dustcover with a soft, damp රෙදි. මතුපිට සීරීම් ඇති විය හැකි උල්ෙල්ඛ පිරිසිදු කරන්නන්ගෙන් වළකින්න.

7. දෝශ නිරාකරණය

If you encounter issues with your turntable, consult the following common problems and solutions:

8. පිරිවිතර

9. වගකීම් සහ සහාය

For detailed warranty information, please refer to the documentation included with your product or visit the official Pro-Ject Audio Systems website. For technical support or service inquiries, please contact Pro-Ject customer service through their official channels.