හැඳින්වීම
The Walrus Audio MAKO Series ACS1 is an advanced amp and cab simulator pedal designed to provide a wide range of classic amplifier tones and cabinet simulations directly to your sound system or recording interface. This manual will guide you through the features, setup, operation, and maintenance of your ACS1 pedal.
රූපය 1: ඉදිරිපස view of the Walrus Audio MAKO Series ACS1 pedal, showcasing its control knobs and footswitches.
සැලසුම
බල අවශ්යතා
The ACS1 requires a standard 9VDC power supply with a minimum of 300mA, center-negative polarity. Ensure your power supply meets these specifications to prevent damage to the unit.
රූපය 2: පසුපස view of the ACS1 showing the 9VDC power input, USB port, headphone jack, and mono/stereo outputs.
සම්බන්ධතා
- Input (Mono/Stereo): Connect your instrument or the output of other pedals to the input jack(s). For mono operation, use the MONO IN jack. For stereo, use both STEREO IN and MONO IN.
- Output (Mono/Stereo): Connect the ACS1 to your amplifier, mixer, or audio interface. For mono output, use the MONO OUT jack. For stereo, use both MONO OUT and STEREO OUT.
- හෙඩ්ෆෝන් ප්රතිදානය: A dedicated 3.5mm stereo jack for silent practice.
- USB Port: Used for firmware updates and loading custom Impulse Responses (IRs) via a computer.
- MIDI IN/THRU: For external MIDI control of the pedal's functions and presets.
රූපය 3: Input jacks (Mono and Stereo).
රූපය 4: MIDI IN and THRU ports.
මෙහෙයුම් උපදෙස්
පාලනය කරයිview
The ACS1 features a comprehensive set of controls to shape your tone.
රූපය 5: සවිස්තරාත්මක view of the ACS1 control panel.
- BASS, MID, TREB: Three-band EQ controls to adjust the low, mid, and high frequencies of your tone.
- VOL: පැඩලයේ සමස්ත ප්රතිදාන පරිමාව පාලනය කරයි.
- ලාභය: Adjusts the amount of overdrive and distortion, simulating the gain stagක ඊ ampජීවිතාරක්ෂකයා.
- කාමරය: Controls the amount of simulated room reverb, from a dry, isolated sound to a large studio environment.
- AMP Toggle Switch (Fullerton, London, Dartford): Selects one of three iconic amplifier ආකෘති.
- ෆුලර්ටන්: Inspired by classic American clean amps.
- ලන්ඩන්: Based on British rock ampජීවිතාරක්ෂක.
- Dartford: Emulates a chimey, British-voiced amp.
- CAB Toggle Switch (A, B, C): Selects one of three cabinet impulse responses (IRs). These can be customized via USB.
- L+R Toggle Switch: Determines how the amp and cab models are applied in stereo.
- L: Applies the selected amp/cab to the left channel only.
- R: Applies the selected amp/cab to the right channel only.
- +: Applies the selected amp/cab to both left and right channels.
- BYPASS Footswitch: බලපෑම සක්රිය / අක්රිය කරයි.
- බූස්ට් පා මාරුව: Activates a preset boost in volume and/or gain.
- පෙර බොත්තම: Cycles through onboard presets. The ACS1 stores 3 onboard presets (128 via MIDI).
පෙරසිටුවීම් සුරැකීම
To save a preset, adjust the controls to your desired settings. Press and hold the PRESET button until the LED flashes, indicating the preset has been saved.
ස්ටීරියෝ මෙහෙයුම
The ACS1 allows for flexible stereo routing. You can run the same amp model through both channels or assign different amp models to each channel using the L+R toggle switch and separate settings for each side.
නඩත්තු කිරීම
පිරිසිදු කිරීම
To clean the pedal, use a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish and internal components.
ස්ථිරාංග යාවත්කාලීන කිරීම්
Walrus Audio periodically releases firmware updates to enhance features and improve performance. Connect the ACS1 to your computer via the USB port and visit the Walrus Audio website for instructions and software to perform updates. Keeping your firmware updated ensures optimal performance and access to the latest features.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| ශබ්ද ප්රතිදානයක් නැත. | Incorrect power supply, incorrect cable connections, pedal in bypass mode, volume knob set to zero. |
|
| Distorted or unwanted noise. | Excessive GAIN setting, incompatible power supply, ground loop. |
|
| Pedal not responding to MIDI. | Incorrect MIDI cable connection, incorrect MIDI channel, MIDI settings not configured. |
|
පිරිවිතර
- ආකෘතිය: ACS1
- අයිතම ආදර්ශ අංකය: 900-1057
- වෙළඳ නාමය: Walrus Audio
- බල අවශ්යතාවය: 9VDC, 300mA, Center-Negative
- මානයන්: 570.87 x 452.76 x 295.28 inches (Note: This dimension seems unusually large for a pedal and might be a packaging dimension. Refer to manufacturer's official product page for exact pedal dimensions.)
- අයිතමයේ බර: 0.018 ounces (Note: This weight seems unusually low for a pedal and might be an error. Refer to manufacturer's official product page for exact pedal weight.)
- සම්බන්ධතාවය: Mono/Stereo Input, Mono/Stereo Output, Headphone Output, USB, MIDI IN/THRU
- විශේෂාංග: 3 Amp Models, 3 Cab IRs (expandable), 3 Onboard Presets (128 via MIDI), 3-Band EQ, Room Reverb, Boost Function.
වගකීම් සහ සහාය
For warranty information, technical support, or further assistance with your Walrus Audio MAKO Series ACS1, please visit the official Walrus Audio webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සහාය සෘජුවම අමතන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.
