Leviton D26HD-1BW Decora Smart Wi-Fi (2nd Gen) 600W Dimmer Switch User Manual

1. හැඳින්වීම

This manual provides detailed instructions for the installation, setup, and operation of your Leviton D26HD-1BW Decora Smart Wi-Fi (2nd Gen) 600W Dimmer Switch. This device allows for wireless lighting control via a Wi-Fi network and the My Leviton app, without requiring a separate hub. It supports voice control through Amazon Alexa, Hey Google, and Apple Siri.

2 ආරක්ෂිත තොරතුරු

WARNING: TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER at the circuit breaker or fuse and test that the power is OFF before wiring! This device must be installed by a qualified electrician or trained personnel in accordance with all national and local electrical codes and regulations.

• ස්ථාපනය කිරීමට පෙර විදුලිය විසන්ධි කර ඇති බවට වග බලා ගන්න.
• Use only with compatible dimmable LED, CFL, incandescent, or halogen bulbs.
• Requires a neutral wire for operation. If a neutral wire is not present in your electrical box, this device is not compatible.
• Do not exceed the maximum load rating of 600W incandescent/halogen or 300W dimmable LED/CFL.
• ගෘහස්ථ භාවිතය සඳහා පමණි.

3. පැකේජ අන්තර්ගතය

• Leviton D26HD-1BW Decora Smart Wi-Fi (2nd Gen) 600W Dimmer Switch
• කම්බි ගෙඩි
• Wallplate (may be sold separately depending on package)
• උපදෙස් පත්‍රිකාව

4. ස්ථාපනය

Follow these steps carefully to install your dimmer switch. If you are unsure about any part of these instructions, consult a qualified electrician.

1. බලය අක්රිය කරන්න: Locate the circuit breaker or fuse that controls the light switch you are replacing and turn it OFF. Verify power is off using a voltagඊ පරීක්ෂක.
2. පැරණි ස්විචය ඉවත් කරන්න: Unscrew and carefully pull the old switch from the wall box. Disconnect the wires from the old switch.
3. වයර් හඳුනා ගන්න: You will typically find the following wires:
   • LINE (Hot): Carries power from the circuit breaker.
   • පැටවීම: Carries power to the light fixture.
   • උදාසීන: Required for this device. Usually white.
   • බිම: Bare copper or green wire.
4. Connect New Dimmer: Connect the wires from the wall box to the corresponding wires on the Leviton D26HD-1BW dimmer switch using the provided wire nuts. Ensure all connections are secure.
   • සම්බන්ධ කරන්න රේඛාව wire to the dimmer's black wire.
   • සම්බන්ධ කරන්න පැටවීම wire to the dimmer's red wire.
   • සම්බන්ධ කරන්න මධ්යස්ථ wire to the dimmer's white wire.
   • සම්බන්ධ කරන්න බිම wire to the dimmer's green wire.
5. ඩිමර් සවි කරන්න: Carefully push the wired dimmer switch into the wall box. Secure it with the mounting screws.
6. Attach Wallplate: Install the wallplate (if included or purchased separately).
7. බලය ප්‍රතිස්ථාපනය කරන්න: පරිපථ කඩනයේදී නැවත විදුලිය ක්‍රියාත්මක කරන්න.

රූපය 4.1: ඉදිරිපස view of the Leviton D26HD-1BW Decora Smart Wi-Fi Dimmer Switch. This image displays the physical appearance of the dimmer switch, including the rocker switch and the dimming bar on the right side.

5. Setup: Connecting to My Leviton App

To unlock the full smart features of your dimmer, connect it to the My Leviton app.

1. Download the My Leviton App: Download the free My Leviton app from the App Store (iOS) or Google Play Store (Android).
2. ගිණුමක් තනන්න: Open the app and follow the on-screen instructions to create a My Leviton account or log in if you already have one.
3. උපාංගය එක් කරන්න: From the app's home screen, tap the '+' icon to add a new device. Select your dimmer switch model.
4. යුගල කිරීමේ මාදිලිය: Follow the app's instructions to put your dimmer switch into pairing mode. This usually involves holding down the top rocker for a few seconds until the status LED blinks.
5. Wi-Fi වෙත සම්බන්ධ වන්න: The app will guide you through connecting the dimmer to your home's 2.4 GHz Wi-Fi network. Ensure your mobile device is also connected to the same 2.4 GHz network during setup.
6. ඔබගේ උපාංගය නම් කරන්න: Assign a name to your dimmer switch (e.g., "Living Room Lights") for easy identification and voice control.

රූපය 5.1: The Leviton dimmer switch shown alongside a smartphone displaying the My Leviton app interface. This illustrates how the physical device is controlled and managed through the mobile application.

රූපය 5.2: A smartphone displaying the My Leviton app, superimposed over an image of a house at night with lights on. This visualizes the ability to control home lighting remotely using the app.

6. මෙහෙයුම් උපදෙස්

6.1 අතින් පාලනය

• සක්රිය / අක්රිය කරන්න: Press the top of the rocker switch to turn lights ON. Press the bottom of the rocker switch to turn lights OFF.
• අඳුරු/දීප්තිමත්: Use the vertical dimming bar on the right side of the switch to adjust light levels. Slide up to brighten, slide down to dim.
• උපරිම දීප්තිය: Double-press the top rocker to turn lights ON at maximum brightness.

6.2 App Control (My Leviton)

The My Leviton app provides advanced control and customization options:

• දුරස්ථ පාලක: Turn lights ON/OFF and adjust brightness from anywhere using your smartphone or tablet.
• උපලේඛනගත කිරීම: Create custom schedules for your lights to turn ON/OFF or dim at specific times, or based on sunrise/sunset.
• දර්ශන: Group multiple smart devices and create scenes (e.g., "Movie Night" scene dims lights to 30%).
• අභිරුචි සැකසුම්: Adjust fade rates, preset light levels, and bulb types within the app.

6.3 හඬ පාලනය

Integrate your Leviton dimmer with popular voice assistants for hands-free control.

• ඇමසන් ඇලෙක්සා: Enable the My Leviton skill in the Alexa app. Then, use commands like, "Alexa, dim Living Room Lights to 50%."
• හේයි ගූගල්: Link your My Leviton account in the Google Home app. Use commands such as, "Hey Google, turn on Kitchen Lights."
• ඇපල් සිරි: Use the Apple HomeKit integration (if configured) or create Siri Shortcuts through the My Leviton app.

රූපය 6.1: An Amazon Echo device displayed with logos for "Works with Alexa," "Works with Hey Google," and "Works with Apple HomeKit." This image highlights the dimmer switch's compatibility with major voice control platforms.

රූපය 6.2: A modern house exterior with various Leviton smart devices and logos indicating compatibility with My Leviton, Amazon Alexa, Apple HomeKit, Hey Google, and IFTTT. This demonstrates the broad ecosystem integration of the smart dimmer.

7. නඩත්තු කිරීම

Your Leviton Decora Smart Dimmer Switch requires minimal maintenance. To clean the device, gently wipe it with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or internal components. Ensure power is off before cleaning.

8. දෝශ නිරාකරණය

• Lights not turning ON/OFF:
  • පරිපථ කඩනය ක්‍රියාත්මක දැයි පරීක්ෂා කරන්න.
  • Verify wiring connections are secure and correct.
  • Ensure the bulb is working and properly installed.
• Dimmer not responding to app/voice commands:
  • Check your Wi-Fi connection. The dimmer requires a stable 2.4 GHz Wi-Fi network.
  • Ensure your mobile device has internet access.
  • Verify the dimmer is properly paired with the My Leviton app.
  • For voice control, ensure the My Leviton skill/account is linked in the respective voice assistant app.
  • Try restarting your Wi-Fi router and the dimmer switch (by turning off/on power at the breaker).
• Lights flickering or not dimming properly:
  • Ensure you are using dimmable bulbs. Non-dimmable bulbs may flicker or not function correctly.
  • Check the bulb type settings in the My Leviton app, if applicable.
  • මුළු වොට් එක සත්‍යාපනය කරන්නtage of connected bulbs does not exceed the dimmer's maximum load rating.

9. පිරිවිතර

10 වගකීම් සහතිකය

This Leviton D26HD-1BW Decora Smart Wi-Fi Dimmer Switch comes with a වසර 1ක සීමිත වගකීමක්. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Leviton webඅඩවිය.

11. සහාය

For further assistance, technical support, or to access additional resources, please visit the official Leviton website or contact Leviton customer service. You can also find helpful information and FAQs within the My Leviton app.

සබැඳි සම්පත්: www.leviton.com