KIWI KSB-2203 Rechargeable Blender

හැඳින්වීම

Thank you for choosing the KIWI KSB-2203 Rechargeable Blender. This portable blender is designed for convenient blending of fruits, vegetables, and other ingredients to create smoothies, shakes, and purees. Please read this manual carefully before first use to ensure safe and optimal operation of your device. Keep this manual for future reference.

වැදගත් ආරක්ෂක උපදෙස්

• උපාංගය භාවිතා කිරීමට පෙර සියලුම උපදෙස් කියවන්න.
• Keep the blender out of reach of children. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• මෝටර් පාදම ජලයේ හෝ වෙනත් කිසිදු ද්‍රවයක ගිල්වන්න එපා. දැන්වීමෙන් පමණක් පිරිසිදු කරන්න.amp රෙදි.
• Avoid contact with moving parts. Blades are sharp. Handle with extreme care during assembly, disassembly, and cleaning.
• Ensure the cup and blade assembly are securely fastened to the motor base before operation. The blender will not operate if not properly assembled.
• බ්ලෙන්ඩරය හිස් වූ විට ක්‍රියා නොකරන්න.
• Do not overfill the blender cup. Observe the maximum fill line.
• Do not blend hot liquids. Allow hot ingredients to cool before blending.
• Use only the charging cable provided or a compatible 5V USB charger.
• උපකරණය ඔබම අලුත්වැඩියා කිරීමට හෝ වෙනස් කිරීමට උත්සාහ නොකරන්න. ඕනෑම අලුත්වැඩියාවක් සඳහා සුදුසුකම් ලත් සේවා නිලධාරීන් අමතන්න.
• Unplug the blender from the power source when not in use, before assembling or disassembling parts, and before cleaning.

නිෂ්පාදනය අවසන්view

The KIWI KSB-2203 Rechargeable Blender consists of several key components designed for ease of use and portability.

Figure 1: KIWI KSB-2203 Rechargeable Blender (various colors shown)

රූපය 2: ඉහළ view of the blender lid, showing the power button.

රූපය 3: සවිස්තරාත්මක view of the stainless steel blade assembly.

සංරචක:

• Blender Cup: 250ml capacity, transparent for viewඅන්තර්ගතය උඩුගත කිරීම.
• බ්ලේඩ් එකලස් කිරීම: Features durable stainless steel blades for efficient blending.
• මෝටර් පදනම: Contains the motor, battery, and control electronics.
• පියන: Securely seals the cup and houses the power button and charging port.
• ආරෝපණ වරාය: Located on the lid, protected by a cover.
• බල බොත්තම: Protected start button requiring a double press to activate.
• ආරෝපණ දර්ශක ආලෝකය: Provides status on battery charging.

සැලසුම

1. මූලික අයකිරීම

Before first use, fully charge the blender. Connect the charging cable to the charging port on the lid and plug the other end into a compatible USB power source (e.g., computer, USB wall adapter). The charge indicator light will illuminate during charging and turn off or change color when fully charged. A full charge allows for approximately 10-12 blending cycles.

2. First Use Cleaning

Wash the blender cup, lid, and blade assembly with warm, soapy water. Rinse thoroughly and dry all parts completely before assembly. Do not immerse the motor base in water.

3. එකලස් කිරීම

1. Ensure the motor base is clean and dry.
2. Place the blade assembly onto the motor base, twisting clockwise until securely locked.
3. Attach the blender cup to the blade assembly, twisting clockwise until securely locked.
4. Place the lid onto the blender cup, twisting clockwise until securely sealed. Ensure all components are tightly assembled to prevent leaks and ensure proper operation.

මෙහෙයුම

1. අමුද්රව්ය සකස් කිරීම

Cut fruits and vegetables into small pieces (approximately 1-2 cm) to ensure smooth blending. Add liquids such as water, milk, or juice first, then add solid ingredients. Do not exceed the maximum fill line on the blender cup.

2. Starting the Blender

With the blender fully assembled and ingredients added, double-press the power button located on the lid to start the blending cycle. The blender features a protected start button to prevent accidental activation.

3. Blending Cycle

The blender will operate for an automatic 45-second cycle. For optimal results, you may gently shake the blender during operation to ensure all ingredients are processed evenly. The blender will automatically stop after 45 seconds.

4. Stopping the Blender

To stop the blender before the automatic cycle completes, press the power button once.

5. After Blending

Once blending is complete, you can drink directly from the cup or pour the contents into another container. Always ensure the blender is turned off before disassembling.

පිරිසිදු කිරීම සහ නඩත්තු කිරීම

Regular cleaning and proper maintenance will extend the life of your KIWI KSB-2203 blender.

1 විසුරුවා හැරීම

Ensure the blender is off. Remove the lid, then carefully unscrew the blender cup from the blade assembly. Finally, unscrew the blade assembly from the motor base.

2. Cleaning the Cup, Lid, and Blade Assembly

Wash the blender cup, lid, and blade assembly with warm, soapy water. Use a brush to clean around the blades carefully. Rinse thoroughly and allow all parts to air dry completely before reassembling or storing.

3. Cleaning the Motor Base

දැන්වීම සමඟ මෝටර් පදනම පිස දමන්නamp cloth. Do not immerse the motor base in water or any other liquid. Ensure the charging port cover is closed when cleaning.

4. ගබඩා කිරීම

Store the clean and dry blender in a cool, dry place, away from direct sunlight and moisture. Ensure all parts are properly assembled or stored separately to prevent damage.

දෝෂගවේෂණය

ඔබේ බ්ලෙන්ඩරය සමඟ ගැටළු ඇති වුවහොත්, පහත සඳහන් පොදු ගැටළු සහ විසඳුම් වෙත යොමු වන්න:

• බ්ලෙන්ඩරය ආරම්භ නොවේ:
  • Ensure the blender is fully charged. The charge indicator light will show status.
  • Check if the cup and blade assembly are securely attached to the motor base, and the lid is properly sealed. The safety mechanism prevents operation if not correctly assembled.
  • Ensure you are double-pressing the power button to activate.
• Blender stops during operation:
  • The battery might be low. Recharge the blender.
  • The blender might be overloaded. Reduce the amount of ingredients or add more liquid.
  • Ingredients might be too large or hard. Cut ingredients into smaller pieces.
• Leaking during operation:
  • Ensure the blade assembly, cup, and lid are all tightly screwed on.
  • Check the silicone seals for proper placement and any damage.
  • Do not overfill the blender cup beyond the maximum fill line.

පිරිවිතර

Figure 4: Product packaging with specifications.

Figure 5: Product label with technical details.

වගකීම් සහ සහාය

KIWI products are manufactured with high-quality standards. For warranty information, please refer to the warranty card included with your purchase or contact KIWI customer support. If you experience any issues or have questions regarding your KSB-2203 blender, please reach out to our customer service team for assistance.

For further support, please visit the official KIWI webඅඩවියට හෝ ඔබේ ප්‍රාදේශීය බෙදාහරින්නා අමතන්න.