1. හැඳින්වීම
Thank you for choosing the HB-704 Submersible Pump. This pump is designed for efficient water circulation in various applications, including cold air mechanisms and ice machines. Its compact design and robust performance make it an ideal choice for continuous operation. Please read this manual thoroughly before installation and operation to ensure safe and effective use.
රූපය 1: ප්රධාන view of the HB-704 Submersible Pump. This image shows the overall compact design of the pump, including its outlet nozzle and power cord connection.
2. ආරක්ෂිත උපදෙස්
To prevent injury or damage to the pump, always observe the following safety precautions:
- විදුලි ආරක්ෂාව: බල සැපයුම් පරිමාව සහතික කරන්නtage matches the pump's requirements (220-240V/50Hz). Do not operate the pump with a damaged power cord or plug. Always disconnect power before handling or performing maintenance on the pump.
- සම්පූර්ණ ගිල්වීම: The pump must be completely immersed in water during operation. Never run the pump dry (idling without water), as this will cause overheating and permanent damage.
- ජල උෂ්ණත්වය: The working water temperature must not exceed 35 °C (95 °F). Operating the pump in water hotter than this limit can lead to malfunction or damage.
- නිසි ස්ථානගත කිරීම: Place the pump on a stable, flat surface within the water. Ensure it is not obstructed by debris.
- හැසිරවීම: Do not lift or carry the pump by its power cord. Use the pump body for handling.
- ළමුන් සහ සුරතල් සතුන්: Keep the pump and its power cord out of reach of children and pets.
3. පිහිටුවීම
Follow these steps for proper installation of your HB-704 Submersible Pump:
- පොම්පය ඉවත් කරන්න: Carefully remove the pump from its packaging and inspect it for any signs of damage.
- හෝස් අමුණන්න: Connect a hose with an inner diameter of 12mm to the pump's outlet nozzle (approximately 13mm in diameter). Ensure a secure fit to prevent leaks.
- පොම්පය ස්ථානගත කරන්න: Place the pump in the desired location within the water reservoir or container. Ensure the pump is fully submerged and resting on a stable surface. The integrated suction cups on the bottom of the pump can help secure it in place.
- Route Power Cord: Route the 130cm long power cord safely, ensuring it does not create a tripping hazard and is not pinched or kinked.
- ගිල්වීම තහවුරු කරන්න: Double-check that the entire pump body is completely underwater before connecting to power.
රූපය 2: පැත්ත view showing the power cord connection and bottom view illustrating the suction cups for stable placement.
4. මෙහෙයුම් උපදෙස්
Once the pump is properly set up and fully submerged:
- බලයට සම්බන්ධ කරන්න: Plug the power cord into a suitable electrical outlet (220-240V/50Hz). The pump will begin operating immediately.
- ජල මට්ටම නිරීක්ෂණය කරන්න: Continuously monitor the water level to ensure the pump remains fully submerged during operation. Running the pump without water will cause damage.
- ප්රවාහය නිරීක්ෂණය කරන්න: Check the water flow from the outlet to ensure it is consistent and unobstructed.
- To Stop Operation: විදුලි ප්ලග් එකෙන් විදුලි පේනුව විසන්ධි කරන්න.
රූපය 3: ඉදිරිපස view of the pump, highlighting the water intake area. Ensure this area remains clear of debris for optimal performance.
5. නඩත්තු කිරීම
Regular maintenance will prolong the life and efficiency of your pump:
- බලය විසන්ධි කරන්න: Always unplug the pump from the power source before performing any maintenance.
- ඉන්ටේක් තිරය පිරිසිදු කරන්න: Periodically check and clean the intake screen to remove any accumulated debris, such as dirt, algae, or sediment, which can reduce flow.
- පිරිසිදු ප්රේරකය: If flow is significantly reduced, the impeller may be clogged. Carefully disassemble the pump (refer to diagrams if available, or gently pry open the intake cover) and clean the impeller and its housing. Rinse with clean water.
- විදුලි රැහැන් පරීක්ෂා කරන්න: Regularly inspect the power cord for any cuts, fraying, or damage. Do not use the pump if the cord is damaged.
- ගබඩා: If storing the pump for an extended period, clean it thoroughly, dry it completely, and store it in a dry, frost-free location.
රූපය 4: පැත්ත view of the pump, showing the vented casing. Regular cleaning helps maintain optimal heat dissipation.
6. දෝශ නිරාකරණය
If you encounter issues with your HB-704 pump, refer to the following common problems and solutions:
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| පොම්පය ආරම්භ නොවේ | බල සැපයුමක් නැත විදුලි රැහැනට හානි වී ඇත Impeller jammed by debris |
බල සැපයුම සහ සම්බන්ධතාවය පරීක්ෂා කරන්න Inspect and replace if damaged (do not use) Disconnect power, clean impeller and intake |
| ජල ප්රවාහය අඩු වීම | අවහිර වූ ඇතුල් වීමේ තිරය Kinked or obstructed hose Impeller partially blocked |
Clean intake screen Straighten hose, remove obstructions Disconnect power, clean impeller |
| පොම්පය ඝෝෂාකාරී ය | ප්රේරකයේ සුන්බුන් පොම්පය සම්පූර්ණයෙන්ම ජලයෙන් යටවී නැත පොම්පය ස්ථායී නොවේ |
Disconnect power, clean impeller පොම්පය සම්පූර්ණයෙන්ම ජලයෙන් යට වී ඇති බවට වග බලා ගන්න. Secure pump with suction cups on a flat surface |
| පොම්පය අනපේක්ෂිත ලෙස නතර වේ | Overheating due to dry running විදුලිය විසන්ධි වීම |
Ensure continuous full submersion බල සැපයුම පරීක්ෂා කරන්න |
7. පිරිවිතර
Detailed technical specifications for the HB-704 Submersible Pump:
| විශේෂාංගය | පිරිවිතර |
|---|---|
| ආකෘතිය | HB-704 |
| බල සැපයුම් වෙළුමtage | 220-240V/50Hz |
| බලශක්ති පරිභෝජනය | 14W |
| උපරිම ප්රවාහ අනුපාතය | 800 L/h (Liters per hour) |
| උපරිම හිස | 1.75 m (Meters) |
| මානයන් (ආසන්න වශයෙන්) | Length: 75mm, Width: 81mm (including ears), Height: 71mm |
| Outlet Nozzle Diameter | Approx. 13mm (suitable for 12mm inner diameter hose) |
| විදුලි රැහැන් දිග | ආසන්න වශයෙන්. 130 සෙ.මී |
| Max Working Water Temperature | 35 °C (95 °F) |
| ද්රව්ය | වෙනත් |
| ශෛලිය | ගිල්විය හැකි |
| බලශක්ති ප්රභවය | රැහැන්ගත විදුලි |
රූපය 5: ඉහළ view of the pump, showing the product label with key specifications.
8. වගකීම් සහ සහාය
As the brand is listed as 'Unknown', specific warranty and support information is not provided in this manual. For any warranty claims, technical support, or service inquiries, please contact the retailer or seller from whom you purchased this product. Retain your proof of purchase for any potential claims.
