හැඳින්වීම
This manual provides detailed instructions for the DKARDU DC 5V-12V Mini Microphone Amplifier Board. This module is designed to amplify audio signals from various microphone types, including electret, condenser, and moving coil microphones, for output to speakers. It is suitable for a wide range of audio projects and applications.
රූපය: අවසන්view of the DKARDU Mini Microphone Amplifier Board kit, including two amplifier modules, two electret microphones, and two power cables.
පෙට්ටියේ ඇති දේ
පැකේජයට පහත සඳහන් සංරචක ඇතුළත් වේ:
- 2 x DC 5V-12V Micro Electret Ampලයිෆයර් පුවරු
- 2 x Electret Microphones
- 2 x DC Female Power Pigtail Cables
පිරිවිතර
සඳහා සවිස්තරාත්මක තාක්ෂණික පිරිවිතර ampලයිෆයර් මොඩියුලය:
| පරාමිතිය | වටිනාකම |
|---|---|
| මෙහෙයුම් වෙළුමtage | 5V-12V DC (Voltage below 5V will significantly reduce sound; do not exceed 15V) |
| මෙහෙයුම් ධාරාව | 1mA (static) ~ 150mA (max) |
| Output Speaker Impedance | 4 Ω - 32 Ω (Higher impedance results in higher efficiency) |
| Supported Speaker Power | 0.5W-25W (Any power speaker can be used, volume is not directly proportional to speaker power, as long as it's greater than amplifier output rating) |
| උපරිම නිමැවුම් බලය | 750mW |
| ආදාන සහාය | Electret microphone, condenser microphone, moving coil microphone, audio signal |
| මානයන් (LxWxH) | අඟල් 20 x 12 x 6 මි.මී. / 0.79 x 0.47 x 0.23 අඟල් |
රූපය: විස්තරාත්මක view හි amplifier board highlighting its key parameters.
රූපය: මානයන් amplifier board, showing its compact size.
සැලසුම
Follow these steps to correctly set up your amplifier board:
- මයික්රෆෝනය සම්බන්ධ කරන්න: Use a shielded cable to connect the electret microphone to the 'IN' and 'GND' terminals of the amplifier board. Pay close attention to the polarity of the electret microphone; incorrect polarity will result in very low or no sound.
- කථානායක සම්බන්ධ කරන්න: Connect your speaker to the 'OUT' terminals of the amplifier board. Ensure the speaker is positioned away from the microphone to prevent self-excited noise (feedback).
- සම්බන්ධක බලය: Connect a DC power supply (5V-12V) to the positive and negative terminals of the ampලයිෆයර් පුවරුව. WARNING: Do not reverse the polarity of the power supply, as this will damage the module.
Image: A clear wiring diagram illustrating how to connect the DC power supply, microphone, and speaker to the ampලයිෆයර් පුවරුව.
මෙහෙයුම් උපදෙස්
Once properly set up, the amplifier board will begin to amplify the audio signal from the connected microphone. The module supports various microphone types and can be integrated into different audio systems.
- ශබ්ද ගැලපුම: The board features a small potentiometer (labeled 'VOL') for adjusting the output volume. Use a small screwdriver or appropriate tool to carefully turn the potentiometer to achieve the desired volume level.
- ආදාන ගැළපුම: ද amplifier is designed to work with electret, condenser, and moving coil microphones, as well as general audio signals.
රූපය: ද amplifier board, illustrating its compatibility with electret, microphone, condenser microphone, moving coil microphone, and general audio signals.
රූපය: උදාamples of different applications and wiring configurations for the amplifier board, demonstrating its versatility.
නඩත්තු කිරීම
To ensure the longevity and optimal performance of your DKARDU Mini Microphone Amplifier Board, consider the following maintenance guidelines:
- වියළිව තබා ගන්න: Protect the module from moisture and liquids, as water can cause short circuits and damage components.
- මෘදු ලෙස පිරිසිදු කරන්න: If cleaning is necessary, use a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- පරිස්සමින් හැසිරවීම: The board contains delicate electronic components. Avoid dropping or subjecting it to strong impacts.
- නිසි ගබඩා කිරීම: When not in use, store the module in a cool, dry place, away from direct sunlight and extreme temperatures.
දෝෂගවේෂණය
ඔබට ගැටළු ඇති වුවහොත් ඔබේ amplifier board, refer to the following common problems and solutions:
- Very Little or No Sound:
- Check the polarity of the electret microphone connection to the 'IN' and 'GND' terminals. Reversing the polarity will significantly reduce or eliminate sound.
- බල සැපයුම් පරිමාව සහතික කරන්නtage is within the 5V-12V range. Voltage below 5V will result in significantly reduced sound.
- Verify all connections are secure and correct according to the wiring diagram.
- Self-Excited Noise (Feedback):
- Ensure the speaker is positioned sufficiently far away from the microphone to prevent audio feedback.
- Check for proper shielding of the microphone cable.
- Module Not Functioning / Damaged:
- Verify that the DC power supply polarity is correct. Reversing the positive and negative connections will burn out the module.
- ආදාන පරිමාව සහතික කරන්නtage 15V ට වැඩි නොවේ.
Image: Important notes for the amplifier board, emphasizing correct wiring and power supply to prevent damage and ensure proper function.
වගකීම් සහ සහාය
For warranty information and customer support, please refer to the documentation provided with your purchase or contact DKARDU customer service through the retailer where the product was acquired. Keep your proof of purchase for any warranty claims.
