NVS AMP50 B III UHF 1 Output Pole Amplifier පරිශීලක අත්පොත

1. හැඳින්වීම

Thank you for choosing the NVS AMP50 B III UHF 1 Output Pole Amplifier. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your amplifier. Please read this manual thoroughly before using the product and retain it for future reference.

2 ආරක්ෂිත තොරතුරු

වැදගත් ආරක්ෂක උපදෙස්:

• Ensure the power supply (PSUP01, not included) is disconnected before installation or maintenance.
• This device is designed for outdoor pole mounting. Ensure it is securely fastened.
• Protect all connections from moisture. The included rain cover must be used.
• හෙළිදරව් නොකරන්න amplifier to extreme temperatures or direct sunlight for prolonged periods without proper shielding.
• Only use a 12V DC power supply as specified. Using an incorrect power supply may damage the device and void the warranty.
• ඔබට කිසියම් පියවරක් පිළිබඳව සැකයක් ඇත්නම්, ස්ථාපනය සුදුසුකම් ලත් කාර්මිකයෙකු විසින් සිදු කළ යුතුය.

3. පැකේජ අන්තර්ගතය

සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:

• NVS AMP50 B III UHF 1 Output Pole Ampජීවිතාරක්ෂකයා
• වැසි ආවරණය
• පරිශීලක අත්පොත (මෙම ලේඛනය)

Note: The PSUP01 12V DC power supply is not included and must be purchased separately.

4. නිෂ්පාදන ලක්ෂණ

The NVS AMP50 is a vertical audio amplifier designed to boost B III and UHF signals, ensuring optimal reception.

• Vertical audio amplifier with wide-band input (B III + UHF).
• Separate gain adjustments for B III (max. 18 dB) and UHF (max. 30 dB).
• Single signal output with F-connectors.
• Powered by 12V DC from the signal drop line via a PSUP01 power supply (not included).
• Includes a rain cover for outdoor protection.

රූපය 4.1: NVS AMP50 B III UHF 1 Output Pole Amplifier. This image shows the compact design of the amplifier, highlighting its F-connectors for signal input and output, and the robust casing designed for outdoor use with a rain cover.

5. පිහිටුවීම සහ ස්ථාපනය

Follow these steps for proper installation of your NVS AMP50 ampජීවිත කාලය:

1. සවි කිරීම: ආරක්ෂිතව සවි කරන්න amplifier to a pole in a suitable outdoor location, preferably close to the antenna. Ensure the mounting is stable and can withstand environmental conditions.
2. ඇන්ටෙනා සම්බන්ධතාවය: Connect your B III and UHF antenna cables to the respective input F-connectors on the amplifier. Ensure connections are tight and secure.
3. ප්රතිදාන සම්බන්ධතාවය: සම්බන්ධ කරන්න amplifier's single output F-connector to your signal drop line, which leads to your television or distribution system.
4. වැසි ආවරණය: Place the provided rain cover over the amplifier to protect it from weather elements. Ensure it is properly seated to prevent water ingress.
5. Power Supply (PSUP01): Connect the 12V DC power supply (PSUP01, not included) to the signal drop line. The amplifier receives power through this line. Ensure the power supply is connected indoors and away from moisture.
6. බල ගැන්වීම: Once all connections are secure and protected, plug in the PSUP01 power supply.

6. මෙහෙයුම් උපදෙස්

The NVS AMP50 amplifier is designed for continuous operation once installed.

• ගැලපුම් ලබා ගන්න: ද amplifier features separate rotary controls for B III and UHF gain adjustment. Use a small screwdriver to carefully adjust the gain for each band to achieve optimal signal strength without over-amplification. Start with the lowest gain setting and gradually increase until desired signal quality is achieved on your television.
• සංඥා අධීක්ෂණය: Monitor your television's signal strength and quality indicators while adjusting the gain. Over-amplification can lead to signal distortion.
• බල දර්ශකය: The PSUP01 power supply typically has an LED indicator to confirm it is receiving power and supplying it to the ampජීවිතාරක්ෂකයා.

7. නඩත්තු කිරීම

The NVS AMP50 ampලිෆයර් සඳහා අවම නඩත්තුවක් අවශ්‍ය වේ.

• වරින් වර පරීක්ෂා කිරීම: වරින් වර පරීක්ෂා කරන්න amplifier and its connections for any signs of wear, corrosion, or damage, especially after severe weather conditions.
• වැසි ආවරණය: Ensure the rain cover remains securely in place and is not damaged. Replace if necessary.
• පිරිසිදු කිරීම: If necessary, gently clean the exterior of the ampමෘදු සමග ලයිෆයර්, ඩීamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the power supply is disconnected before cleaning.
• සම්බන්ධතා අඛණ්ඩතාව: Check F-connections for tightness to prevent signal loss or ingress of moisture.

8. දෝශ නිරාකරණය

ඔබ ඔබේ ගැටළු වලට මුහුණ දෙන්නේ නම් amplifier, refer to the following troubleshooting guide:

මෙම පියවර අනුගමනය කිරීමෙන් පසුවද ගැටලුව පවතින්නේ නම්, කරුණාකර පාරිභෝගික සහාය අමතන්න.

9. පිරිවිතර

10. වගකීම් සහ සහාය

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official NVS webවෙබ් අඩවිය. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

For further assistance, please contact NVS customer support through their official channels.