1. හැඳින්වීම
The Elgato Wave Mic Arm is a studio-grade boom arm designed for premium microphones. It provides extreme vertical reach to clear large monitors and offers full adjustability for precise microphone positioning. Internal springs and integrated cable channels with removable covers ensure a tidy and accessible setup. Thread adapters are included to ensure compatibility with standard microphone mounts.
පෙට්ටියේ ඇති දේ
- Wave Mic Arm
- රයිසර් දිගුව
- ප්රති බර
- 1/4" to 3/8" and 1/4" to 5/8" Adaptors
- ඇලන් අඬුව
- ඉක්මන් ආරම්භක මාර්ගෝපදේශය
2. පිහිටුවීම
2.1 මේසය Clamp ස්ථාපනය
The Wave Mic Arm features a robust desk clamp that expands up to 60 mm (2.4 inches) to securely attach to most desktop surfaces. Ensure the clamp is tightened firmly to prevent movement during use.
2.2 අත එකලස් කිරීම
The mic arm consists of a lower and upper arm section. The riser extension can be optionally installed to add an additional 150 mm (5.9 inches) of height, allowing the arm to extend over taller monitors. Connect the arm sections and the riser (if used) to the desk clamp තනතුර.
2.3 Attaching Your Microphone
The Wave Mic Arm is compatible with 1/4", 3/8", and 5/8" threads, ensuring broad compatibility with various microphones. Use the provided thread adapters as needed to match your microphone's mounting thread. Attach your microphone to the ball head at the end of the arm.
3. මෙහෙයුම
3.1 Adjusting the Arm
The Wave Mic Arm is fully adjustable with a ball head for precise microphone positioning and a swivel base for 360-degree rotation. Internal springs allow for smooth movement and stable positioning. Use the included Allen wrench to adjust the tension of the joints to match your microphone's weight (250g - 1000g / 0.55 - 2.2 lbs with accessories) and your preferred movement resistance.
3.2 කේබල් කළමනාකරණය
Integrated cable channels with removable covers are built into the arm to keep your microphone cables tidy and out of sight. Gently route your cables through these channels for a clean and organized workspace.
3.3 නිල නිෂ්පාදන වීඩියෝ
Video 1: Elgato High Profile Mic & Camera Boom Arm, So Smooth! This video demonstrates the smooth movement and high-profile capabilities of the Elgato Wave Mic Arm, suitable for various setups including cameras.
Video 2: Is this Highest Quality Microphone Arm on the Market?! This video provides an overview of the mic arm's features and build quality, highlighting its premium design and functionality.
වීඩියෝ 3: නැවතview + Showcase of Elgato Wave Arm. This video showcases the Elgato Wave Mic Arm in action, demonstrating its flexibility and ease of use in a typical setup.
Video 4: Elgato Premium Boom Arm - This is my FAVORITE Boom Arm! A detailed review highlighting the premium features and user experience of the Elgato Wave Mic Arm.
Video 5: Elgato Wave Boom Arm Unbox and Setup! This video guides users through the unboxing and initial setup process of the Elgato Wave Mic Arm.
4. නඩත්තු කිරීම
To ensure the longevity and optimal performance of your Elgato Wave Mic Arm, regular maintenance is recommended:
- පිරිසිදු කිරීම: Wipe down the arm with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
- Joint Tension: Periodically check the tension of the arm's joints. If the arm feels too loose or too stiff, use the provided Allen wrench to adjust the internal springs as described in Section 3.1.
- Cable Channels: Ensure the cable channel covers are securely in place and that cables are not pinched or strained.
- මේසය Clamp: මේසය cl බව තහවුරු කරන්නamp remains tightly secured to your desk surface. Re-tighten if any looseness is detected.
5. දෝශ නිරාකරණය
If you encounter issues with your Elgato Wave Mic Arm, consider the following common solutions:
- Arm Does Not Hold Position:
- Check if the microphone weight is within the supported range (250g - 1000g / 0.55 - 2.2 lbs).
- Adjust the tension of the internal springs using the Allen wrench (refer to Section 3.1).
- මේසය cl සහතික කරන්නamp ආරක්ෂිතව මේසයට සවි කර ඇත.
- අධික ශබ්දය/කම්පනය:
- Verify that all connections (microphone to arm, arm to clamp) are tight.
- Ensure cables are properly routed within the cable channels and not causing tension or rubbing.
- Check if the desk surface is stable and not contributing to vibrations.
- Microphone Not Attaching:
- Confirm you are using the correct thread adapter (1/4", 3/8", or 5/8") for your microphone.
- Ensure the adapter is fully screwed into the microphone and the arm's ball head.
6. තාක්ෂණික පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| තිරස් අතට ළඟා වීම | 780 mm / අඟල් 30.7 |
| Vertical Reach (without riser) | 750 mm / අඟල් 29.5 |
| Riser Extension | 150 mm / අඟල් 5.9 |
| පහළ අත් දිග | 400 mm / අඟල් 15.7 |
| ඉහළ අත් දිග | 400 mm / අඟල් 15.7 |
| මේසය Clamp පුළුල් කිරීම | 60 mm / 2.4 in දක්වා |
| ප්රති බර | 260 ග්රෑම් / 0.57 රාත්තල් |
| Mic Weight Range (with accessories) | 250 - 1,000 g / 0.55 - 2.2 lbs |
| අයිතමයේ බර | රාත්තල් 4.92 (ග්රෑම් 2230) |
| නිෂ්පාදන මානයන් | අඟල් 9.06 x 2.36 x 19.29 |
| ද්රව්ය | Alloy Steel, Aluminium |
| වර්ණය | කළු |
7. වගකීම් සහ සහාය
7.1 වගකීම් තොරතුරු
The Elgato Wave Mic Arm comes with a වසර 2ක නිෂ්පාදකයාගේ වගකීමක් මිලදී ගත් දින සිට. මෙම වගකීම් සහතිකය සාමාන්ය භාවිතය යටතේ ද්රව්ය හා වැඩ කිරීමේ දෝෂ ආවරණය කරයි. වගකීම් හිමිකම් සඳහා කරුණාකර ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.
7.2 පාරිභෝගික සහාය
For technical assistance, troubleshooting, or warranty inquiries, please visit the official Elgato support website or contact their customer service team. Detailed support resources, FAQs, and contact information can be found at www.elgato.com/support.
