1. වැදගත් ආරක්ෂක තොරතුරු
Please read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
අනාගත යොමු කිරීම සඳහා සියලුම අනතුරු ඇඟවීම් සහ උපදෙස් තබා ගන්න.
Note: The product description did not provide specific safety warnings. Always refer to the complete safety manual included with your product for detailed safety guidelines before operation.
2. නිෂ්පාදන අවසන්view
The Parkside PRTA 20-Li C3 is a 20V cordless grass trimmer designed for efficient lawn edge trimming and light grass cutting. This tool offers cordless convenience for garden maintenance.
රූපය 2.1: අවසන්view of the Parkside PRTA 20-Li C3 Cordless Grass Trimmer. This image shows the complete assembled unit, highlighting its ergonomic design and cordless nature.
2.1 සංරචක
- බල ස්විචය සහිත ප්රධාන හසුරුව
- සහායක හසුරුව
- දුරේක්ෂ පතුවළ
- ලයින් ස්පූල් සමඟ ට්රයිමර් හෙඩ්
- ආරක්ෂක ආරක්ෂකයා
- Battery Slot (Battery and charger sold separately)
Figure 2.2: Illustration indicating that the battery and charger are not included with the grass trimmer and must be purchased separately.
3. සැකසීම සහ එකලස් කිරීම
Before first use, ensure all components are present and undamaged. Follow these steps for assembly:
-
Attach the Protective Guard: Secure the protective guard to the trimmer head using the provided fasteners. Ensure it is firmly in place to prevent debris from being thrown towards the user.
රූපය 3.1: සමීප රූපය view of the auxiliary handle and the protective guard attachment area, showing how the guard is positioned.
- සහායක හසුරුව ස්ථාපනය කරන්න: Slide the auxiliary handle onto the shaft and adjust it to a comfortable working position. Tighten the locking mechanism.
-
පතුවළ දිග සකසන්න: Extend or retract the telescopic shaft to achieve an ergonomic working height. Lock the shaft in position.
Figure 3.2: The trimmer shaft can be adjusted for angle, allowing for comfortable operation and versatile trimming positions.
-
බැටරිය ඇතුළු කරන්න: Ensure the battery (not included) is fully charged. Slide the battery into the battery slot on the main handle until it clicks into place.
Figure 3.3: Detail of the main handle and the battery slot, where a 20V battery (sold separately) is inserted to power the trimmer.
4. මෙහෙයුම් උපදෙස්
4.1 ට්රයිමර් එක ආරම්භ කිරීම
- Ensure you are wearing appropriate personal protective equipment (PPE), including safety glasses, gloves, and sturdy footwear.
- Hold the trimmer firmly with both hands, one on the main handle and one on the auxiliary handle.
- ආරක්ෂිත අගුළු දැමීමේ බොත්තම ඔබන්න (තිබේ නම්) ඉන්පසු මෝටරය ආරම්භ කිරීමට ප්රේරක ස්විචය මිරිකා ගන්න.
4.2 කප්පාදු කිරීමේ තාක්ෂණය
- Move the trimmer slowly and steadily across the area to be trimmed.
- Maintain a slight angle to the ground for effective cutting.
- Avoid hitting hard objects like stones, fences, or concrete, as this can damage the trimmer line and head.
- The cutting width is approximately 25 cm. Plan your passes accordingly.
4.3 ට්රයිමර් එක නැවැත්වීම
Release the trigger switch to stop the motor. The trimmer line will cease rotation.
5. නඩත්තු කිරීම
5.1 පිරිසිදු කිරීම
- Always remove the battery before cleaning or performing any maintenance.
- Clean the trimmer head and protective guard after each use to remove grass clippings and debris. Use a damp රෙදි; රළු රසායනික ද්රව්ය භාවිතා නොකරන්න.
- Ensure ventilation slots are clear of obstructions to prevent overheating.
5.2 ට්රයිමර් ලයින් ස්පූල් ප්රතිස්ථාපනය කිරීම
When the trimmer line becomes too short or breaks, it needs to be replaced. This model uses a specific type of line spool.
- ට්රයිමරයෙන් බැටරිය ඉවත් කරන්න.
- Locate the spool cover on the trimmer head.
- Press the tabs or twist the cover to remove it.
- පැරණි හැන්ද ඉවත් කරන්න.
- Insert a new, pre-wound trimmer line spool, ensuring the line feeds through the eyelet.
- ස්පූල් කවරය ප්රතිස්ථාපනය කරන්න, එය ආරක්ෂිතව ස්ථානයට ක්ලික් කරන බව සහතික කරන්න.
Figure 5.1: Images of replacement trimmer line spools, indicating the type of spool required for this model.
රූපය 5.2: ඉහළ සහ පහළ views of the trimmer head, showing the line exit points and the spool housing.
6. දෝශ නිරාකරණය
This section provides solutions to common issues you might encounter with your grass trimmer.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Trimmer ආරම්භ නොවේ | බැටරිය නිවැරදිව ඇතුළු කර හෝ විසර්ජනය කර නැත. ආරක්ෂිත ස්විචය ක්රියා විරහිත කර ඇත. | බැටරිය සම්පූර්ණයෙන්ම ආරෝපණය වී නිවැරදිව ඇතුළු කර ඇති බවට වග බලා ගන්න. ප්රේරකය මිරිකීමට පෙර ආරක්ෂිත අගුළු දැමීමේ බොත්තම ඔබන්න. |
| කප්පාදු කිරීමේ රේඛාව පෝෂණය නොකරයි | Spool tangled or empty. Debris in trimmer head. | Remove battery, then remove spool cover and check for tangles or replace spool. Clear any debris from the trimmer head. |
| කැපුම් කාර්යක්ෂමතාව අඩු වීම | Trimmer line worn or too short. | Replace the trimmer line spool. |
| අධික කම්පනය | හානි වූ ට්රයිමර් හිස හෝ අසමතුලිත රේඛාව. | Inspect trimmer head for damage. Ensure line is properly wound and balanced. If problem persists, seek professional service. |
7. පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| මාදිලියේ නම | PRTA 20-Li C3 |
| ආදර්ශ අංකය | IAN-100375563 |
| වෙළඳ නාමය | උද්යානය |
| බලශක්ති ප්රභවය | Battery-powered (20V compatible) |
| කැපුම් පළල | සෙන්ටිමීටර 25 යි |
| නිෂ්පාදන මානයන් (L x W x H) | 5 x 2 x 12.7 සෙ.මී |
| අයිතමයේ බර | කිලෝ ග්රෑම් 2 යි |
| වර්ණය | කොළ, කළු |
| එකලස් කිරීම අවශ්ය වේ | නැත |
8. වගකීම් සහ සහාය
Information regarding product warranty and customer support was not available in the provided product details. Please refer to the official Parkside documentation included with your purchase or visit the manufacturer's website for warranty terms, registration, and support contact information.





