XTOOL TP150 TPMS Relearn Tool User Manual
Model: XT-TP150
1. හැඳින්වීම
The XTOOL TP150 is a professional Tire Pressure Monitoring System (TPMS) tool designed for comprehensive TPMS service. It supports activation, relearning, programming of XTOOL sensors, and diagnostic functions for TPMS systems. This manual provides detailed instructions for the proper use and maintenance of your TP150 device.
2 ආරක්ෂිත තොරතුරු
Always observe the following safety precautions when operating the TP150 tool:
- භාවිතයට පෙර සියලු උපදෙස් ප්රවේශමෙන් කියවන්න.
- තෙත් තත්වයන් යටතේ හෝ දැවෙන ද්රව/වායු අසල මෙවලම ක්රියාත්මක නොකරන්න.
- Ensure the vehicle's ignition is off before connecting or disconnecting the OBDII cable.
- Use only the accessories and parts specified by XTOOL.
- මෙවලම ළමයින්ගෙන් ඈත් කරන්න.
- Properly dispose of old TPMS sensors and batteries according to local regulations.
3. නිෂ්පාදන අවසන්view
The XTOOL TP150 TPMS tool is a handheld device equipped with a user-friendly interface. It comes with two 315/433MHz dual-frequency sensors for programming.
Image: The XTOOL TP150 device, two XTOOL TPMS sensors, and their protective yellow carrying case.
3.1 ප්රධාන ලක්ෂණ
- TPMS Activation: Activates all known OE and aftermarket TPMS sensors.
- TPMS නැවත ඉගෙනීම: Supports OBD Relearn and Static Relearn for all sensors.
- TPMS Programming: Programs XTOOL 315/433MHz sensors with four methods: Automatic ID Generation, Manual ID Entry, Copy ID by Activating, and Read ECU Copy ID.
- TPMS Diagnosis: Reads and clears TPMS Diagnostic Trouble Codes (DTCs), resets TPMS warning light.
- තත්ය කාලීන දත්ත සංදර්ශකය: Shows sensor ID, tire pressure, temperature, and sensor voltage.
- OE Sensor Information Check: Displays brand, part number, and frequency of OE sensors.
4. පිහිටුවීම
4.1. මූලික උපාංග සැකසුම
- ඇසුරුම්: Carefully remove the TP150 tool and accessories from the packaging.
- බල ගැන්වීම: උපාංගය සක්රිය කිරීමට බල බොත්තම ඔබන්න.
- මෘදුකාංග යාවත්කාලීන: It is highly recommended to update the device software to the latest version before first use. Connect the device to a computer with internet access and follow the update instructions provided on the XTOOL official website or through the device's update menu. (Note: Some functionalities may not work correctly without the latest software.)
4.2. වාහනයට සම්බන්ධ වීම
- වාහනයේ OBDII port එක සොයා ගන්න, සාමාන්යයෙන් රියදුරුගේ පැත්තේ උපකරණ පුවරුව යට.
- වාහනයේ ජ්වලනය අක්රිය ස්ථානයේ ඇති බවට වග බලා ගන්න.
- Connect the OBDII cable from the TP150 tool to the vehicle's OBDII port.
- Turn the vehicle's ignition to the ON position (engine off). The TP150 will power on automatically via the OBDII connection.
5. මෙහෙයුම් උපදෙස්
The TP150 offers various functions accessible from the main menu. Navigate using the directional buttons and confirm selections with the OK button.
5.1. Activating TPMS Sensors
- ප්රධාන මෙනුවෙන්, තෝරන්න "TPMS" සිංහල උපසිරැසි සමඟ or "Activate".
- Choose the vehicle make, model, and year.
- තෝරන්න "Activate Sensor".
- Hold the TP150 tool near each tire's valve stem and press the activation button.
- The tool will display sensor information (ID, pressure, temperature, voltage) upon successful activation.
5.2. TPMS Relearn Procedures
Relearning is required when new sensors are installed, tires are rotated, or the ECU is replaced.
- ප්රධාන මෙනුවෙන්, තෝරන්න "TPMS" සිංහල උපසිරැසි සමඟ, පසුව "නැවත ඉගෙන ගන්න".
- Select the vehicle make, model, and year.
- Choose the appropriate relearn method:
- OBD නැවත ඉගෙන ගැනීම: Connect the TP150 to the vehicle's OBDII port. Follow on-screen instructions to transfer new sensor IDs to the vehicle's ECU.
- Static Relearn: Follow the specific vehicle manufacturer's procedure, often involving a sequence of actions (e.g., turning ignition on/off, pressing brake pedal). The TP150 will guide you through the process.
- Confirm successful relearn on the device screen and check the vehicle's dashboard for the TPMS warning light status.
5.3. Programming XTOOL Sensors
The TP150 can program XTOOL 315/433MHz sensors only. This is useful for replacing faulty sensors.
- ප්රධාන මෙනුවෙන්, තෝරන්න "TPMS" සිංහල උපසිරැසි සමඟ, පසුව "Program Sensor".
- Place the XTOOL sensor to be programmed near the TP150's antenna.
- Choose one of the following programming methods:
- ස්වයංක්රීය හැඳුනුම්පත් උත්පාදනය: The tool generates a new, unique sensor ID.
- Enter ID Manually: Input a specific sensor ID if known.
- Copy ID by Activating: Activate an existing sensor to copy its ID to the new XTOOL sensor.
- Read ECU Copy ID: Read sensor IDs directly from the vehicle's ECU via the OBDII port and copy them to new XTOOL sensors.
- Follow the on-screen prompts to complete the programming.
5.4. Diagnosing TPMS System
- Connect the TP150 to the vehicle's OBDII port.
- ප්රධාන මෙනුවෙන්, තෝරන්න "TPMS" සිංහල උපසිරැසි සමඟ, පසුව "Diagnose".
- The tool will scan the TPMS system for Diagnostic Trouble Codes (DTCs).
- Review the displayed DTCs to identify system faults.
- After repairs, select "Clear DTCs" to erase the codes and reset the TPMS warning light.
6. නඩත්තු කිරීම
- පිරිසිදු කිරීම: උපාංගය මෘදු, ඩී සමඟ පිස දමන්නamp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවණ භාවිතා නොකරන්න.
- ගබඩා: Store the TP150 in its protective case in a dry, cool environment when not in use.
- මෘදුකාංග යාවත්කාලීන: Regularly check for and install software updates to ensure optimal performance and compatibility with new vehicle models and sensors.
- බැටරි සත්කාර: If the device has an internal battery, avoid fully discharging it for extended periods. Charge it periodically if stored for a long time.
7. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| උපාංගය බලගන්වන්නේ නැත. | No power from OBDII port; faulty cable; device issue. | Check OBDII connection; try on another vehicle; ensure vehicle ignition is ON. |
| සංවේදකය සක්රිය කළ නොහැක. | Sensor out of range; sensor faulty/dead battery; incorrect vehicle selection; outdated software. | Ensure tool is close to valve stem; check sensor condition; verify vehicle details; update software. |
| Relearn fails. | Incorrect relearn procedure; vehicle specific issues; outdated software. | Follow on-screen instructions precisely; ensure all sensors are activated; update software. |
| Cannot program non-XTOOL sensors. | The TP150 only programs XTOOL brand sensors. | This is expected behavior. Use XTOOL sensors for programming. |
8. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| වෙළඳ නාමය | XTOOL |
| ආදර්ශ අංකය | XT-TP150 |
| අයිතමයේ බර | රාත්තල් 3.52 කි |
| පැකේජ මානයන් | අඟල් 10.79 x 9.84 x 4.09 |
| බලශක්ති ප්රභවය | Handheld (OBDII powered) |
| මෙහෙයුම් පද්ධතිය | Android 4.4 |
| UPC | 789605296901 |
| පළමු දිනය තිබේ | 3 ජූලි 2021 |
9. වගකීම් සහ සහාය
9.1. වගකීම් තොරතුරු
XTOOL products typically come with a limited warranty covering defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official XTOOL website for detailed warranty terms and conditions, including duration and coverage specifics.
9.2 තාක්ෂණික සහාය
For technical assistance, software updates, or any inquiries regarding your XTOOL TP150, please contact XTOOL customer support through their official channels:
- නිල Webඅඩවිය: www.xtooltech.com (Check for support contact details, FAQs, and software downloads)
- ඊමේල් සහාය: නිල වෙබ් අඩවියේ සම්බන්ධතා අංශය බලන්න. webඅඩවිය.
- සබැඳි සම්පත්: Many helpful guides and videos may be available on the XTOOL webවෙබ් අඩවිය හෝ ඔවුන්ගේ නිල සමාජ මාධ්ය නාලිකා.
When contacting support, please have your product model (XT-TP150) and serial number ready.
