FITNATE Smart Fingerprint Door Knob Instruction Manual

1. හැඳින්වීම

This manual provides comprehensive instructions for the installation, operation, and maintenance of your FITNATE Smart Fingerprint Door Knob. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2 ආරක්ෂිත තොරතුරු

• Do not attempt to disassemble or repair the lock yourself. This may void the warranty and cause damage.
• Use only specified batteries (4 x LR6 / 1.5V AA alkaline batteries). Incorrect battery installation can lead to malfunction.
• Keep mechanical keys in a safe place outside the premises.
• Avoid exposing the lock to direct sunlight or rain for prolonged periods.
• Ensure the door is properly aligned and closes smoothly before installation.

3. පැකේජ අන්තර්ගතය

ස්ථාපනය ආරම්භ කිරීමට පෙර සියලුම සංරචක පවතින බව තහවුරු කර ගන්න:

රූප විස්තරය: An image displaying the complete package contents of the FITNATE Smart Fingerprint Door Knob. This includes the main door knob unit with keypad and fingerprint sensor, the interior knob, a latch mechanism, mounting screws, two mechanical keys, and a USB charging cable for emergency power.

• Exterior Door Knob with Keypad and Fingerprint Sensor
• අභ්‍යන්තර දොර බොත්තම
• අගුල් යාන්ත්රණය
• වැඩ වර්ජන තහඩුව
• සවිකරන ඉස්කුරුප්පු
• යාන්ත්‍රික යතුරු (2)
• USB Emergency Power Cable
• ස්ථාපන ආකෘතිය

4. නිෂ්පාදන අවසන්view

The FITNATE Smart Fingerprint Door Knob offers multiple access methods for enhanced security and convenience.

රූප විස්තරය: A black smart door knob with a digital keypad and fingerprint sensor, shown alongside a smartphone displaying the Tuya app interface and a set of mechanical keys. This illustrates the multiple unlocking methods available.

• ඇඟිලි සලකුණු සංවේදකය: For quick and secure biometric access.
• යතුරු පෑඩ්: For password entry. Features a touchable blue backlight for visibility in low light.
• යාන්ත්රික යතුර: Traditional backup access.
• Tuya App Control: Bluetooth connectivity for remote management, unlocking, and access record viewing.

රූප විස්තරය: A diagram showing the dimensions of the FITNATE Smart Fingerprint Door Knob. Key measurements include a knob diameter of 3.15 inches and suitability for door thicknesses between 1.26 to 1.89 inches.

5. පිහිටුවීම සහ ස්ථාපනය

Follow these steps carefully for proper installation. A screwdriver is required.

5.1. දොර සූදානම් කරන්න

1. Mark Door: Using the provided template, mark the hole on both sides of the door at the required backset. Then, mark the latch hole on the door edge.
2. සිදුරු සිදුරු: Bore a 2.13-inch hole on the door face. Then drill a 0.98-inch hole in the door edge to intersect with the center of the 2.13-inch hole. සටහන: Drill the 2.13-inch hole from both sides of the door to prevent wood splintering.

5.2. Latch සහ Strike Plate ස්ථාපනය කරන්න

1. අගුල ස්ථාපනය කරන්න: Insert the latch into the hole and mark a line around the edge of the latch plate. Remove the latch. Chisel approximately 0.12 inches deep or until the latch plate sits flush with the door edge. Re-insert the latch, then drill 0.08 x 0.12-inch holes for mounting screws and fasten the latch.
2. වර්ජනය ස්ථාපනය කරන්න: Close the door and mark the horizontal center of the latch on the door frame. Mark a vertical line where the door edge meets the frame and measure in half of the door thickness to find the vertical center. Extend both lines until they intersect and drill a 0.98-inch hole to 0.59 inches in depth. Position the strike plate and mark around its edge. Chisel the frame to approximately 0.06 inches in depth or until the strike sits flush. Drill 0.08 x 0.12-inch screw holes and fix the strike to the frame.

5.3. Assemble the Lock

1. Install Outside Knob: විදුලි රැහැන අගුල හරහා සංග්‍රහ කර පිටත රෝස මල් පිපෙන තෙක් ස්පින්ඩලය හරහා යොමු කරන්න.
2. Install Inside Knob: Feed the power cable through the hole in the knob and guide the spindle into the handle. Screw the inside knob to the outside knob using mounting screws.
3. බැටරි ස්ථාපනය කරන්න: Install 4 pieces of LR6 / 1.5V AA alkaline batteries into the battery box. Install the + / - batteries in strict accordance with the arrow shown in the figure. Incorrect battery installation will prevent the product from working and may cause damage.
4. බල කේබලය සම්බන්ධ කරන්න: Plug the power cord into the power socket. Recycle any excess power cord into the hole. Install the battery cover in the correct orientation and fasten with 2 mounting screws.

5.4. Initial Test

After installation, perform an initial test:

• Input the default password (e.g., 0123#) to prompt a sound and turn the knob to verify that the unlocking mechanism functions normally.

6. මෙහෙයුම් උපදෙස්

6.1. අගුළු හැරීමේ ක්‍රම

• ඇඟිලි සලකුණු අගුලු හැරීම: Place your registered finger on the sensor. The lock will unlock if the fingerprint is recognized.

  රූප විස්තරය: A hand pressing a finger onto the fingerprint sensor of the smart door knob, indicating the biometric unlock feature.

• මුරපද අගුලු හැරීම: Enter your registered password on the backlit keypad followed by '#'.

  රූප විස්තරය: A close-up of the smart door knob's digital keypad with a blue backlight, showing the numbers 1-9, 0, *, and #, ready for password input.
• යාන්ත්රික යතුර: Insert the mechanical key into the keyhole and turn to unlock. This is for emergency access.
• Tuya App Control: Use the Tuya Smart app on your smartphone to unlock the door via Bluetooth.

  රූප විස්තරය: A smartphone displaying the Tuya app interface, showing options for voice control, app unlock, and one-time password generation, alongside images of an Amazon Echo and Echo Dot, indicating smart home integration.

6.2. User Management (via Tuya App)

The Tuya Smart app allows for comprehensive user management:

රූප විස්තරය: An illustration showing the smart door knob installed on a door, with dotted lines connecting it to four different user profiles (George, Paul, Elaine, Susan), indicating the ability to set up multiple user passwords.

• ඇඟිලි සලකුණු එකතු කරන්න: Follow the in-app instructions to register new fingerprints. The lock can store up to 255 user fingerprints.
• Add Passwords: Create and manage passwords for different users. Maximum length is up to 10 digits.
• Generate Temporary Passcodes: Share temporary access with guests or service providers.
• View Access Records: Monitor unlocking and wrong passcode attempts in real-time.

6.3. ස්වයංක්‍රීය අගුලු දැමීම

The electronic door knob features an automatic locking retractor. It will automatically lock approximately 3 seconds after being opened.

7. නඩත්තු කිරීම

• බැටරි ආදේශනය: When the battery is low, the lock will alarm. Replace all four AA alkaline batteries promptly. Ensure correct polarity.

  රූප විස්තරය: The smart door knob installed on a door, with an icon indicating a low battery alarm and a USB cable for emergency charging. Mechanical keys are also shown as a backup.

• හදිසි බලය: If batteries die completely, use the provided USB charging cable to temporarily power the lock for access.
• පිරිසිදු කිරීම: Wipe the lock surface with a soft, dry cloth. Avoid abrasive cleaners or solvents.

8. දෝශ නිරාකරණය

9. පිරිවිතර

10. වගකීම් සහ සහාය

For warranty information and technical support, please refer to the product packaging or contact FITNATE customer service directly. Keep your purchase receipt for warranty claims.

Online resources and FAQs may be available on the official FITNATE webඅඩවිය.