Orbit Easy Dial 6-Station Indoor Sprinkler Controller

1. හැඳින්වීම

The Orbit 6-zone indoor sprinkler controller is designed to provide convenient and flexible control over your lawn or garden watering schedule. Its user-friendly interface simplifies setup and customization, offering features such as rain delay, water budgeting, and dual watering programs to meet specific irrigation needs.

This manual provides detailed instructions for the installation, operation, and maintenance of your Orbit Easy Dial Sprinkler Controller.

ප්රධාන ලක්ෂණ:

• Flexible Watering Options: Set water duration for each station between 1-240 minutes.
• Efficient Watering Schedule: Up to 8 start times per day to reduce water runoff.
• Rain Delay Feature: Pause watering for 24, 48, or 72 hours.
• Water Budgeting: Adjust run times based on seasonal changes.
• Dual Watering Programs: Independent programs for customized intervals, days of the week, or even/odd watering days.

රූපය 1.1: ඉදිරිපස view of the Orbit Easy Dial 6-Station Indoor Sprinkler Controller, showing the LCD display, control buttons, and rotary dial.

2 ආරක්ෂිත තොරතුරු

Please read all safety information before installing or operating the controller. Failure to follow these instructions could result in injury or property damage.

• This controller is designed for ගෘහස්ථ භාවිතය පමණි. Do not install outdoors or in areas exposed to water.
• කිසියම් රැහැන් ඇදීම හෝ නඩත්තුවක් සිදු කිරීමට පෙර බල සැපයුම විසන්ධි කර ඇති බවට වග බලා ගන්න.
• All electrical connections should be made in accordance with local electrical codes.
• ඒකකය ඔබම අලුත්වැඩියා කිරීමට උත්සාහ නොකරන්න. සියලුම සේවා සුදුසුකම් ලත් පුද්ගලයින් වෙත යොමු කරන්න.

3. පිහිටුවීම සහ ස්ථාපනය

3.1 පාලකය සවි කිරීම

Choose a suitable indoor location near a standard 120V AC electrical outlet. Avoid areas with extreme temperatures or direct sunlight.

1. බිත්තියේ අපේක්ෂිත සවි කිරීමේ ස්ථානය සලකුණු කරන්න.
2. Install two mounting screws (not included) into the wall, leaving approximately 1/8 inch (3 mm) of the screw head exposed. The screws should be spaced vertically to align with the keyhole slots on the back of the controller.
3. Hang the controller on the screws.

රූපය 3.1: උදාample of the controller mounted on a wall in an indoor setting.

3.2 පාලකය රැහැන්ගත කිරීම

Before wiring, ensure the power adapter is unplugged from the electrical outlet.

1. Common Wire (COM): Connect the common wire from your sprinkler valves to the terminal labeled 'COM' on the controller. This is typically a white wire.
2. Zone Wires (1-6): Connect each individual zone wire from your sprinkler valves to the corresponding numbered terminals (1 through 6) on the controller.
3. Rain Sensor (Optional): If using a rain sensor (sold separately), connect its wires to the 'SENSOR' terminals. Ensure the rain sensor switch inside the controller is set to 'ON' if a sensor is connected. If no sensor is used, keep the switch 'OFF' and ensure the jumper wire is in place between the sensor terminals.
4. බල සම්බන්ධතාවය: Plug the included 24V AC transformer into the '24VAC' terminals on the controller. Then, plug the transformer into a standard 120V AC electrical outlet.

රූපය 3.2: සවිස්තරාත්මක view of the wiring terminals, showing connections for 24VAC, SENSOR, COM, and zones 1-6.

4. මෙහෙයුම් උපදෙස්

The Orbit Easy Dial controller features a rotary dial for selecting functions and a set of buttons for adjusting settings.

රූපය 4.1: පාලක පැනලය ඉහළටview, highlighting the LCD display, directional buttons, and function dial.

4.1 Setting Current Time and Date

1. ඩයල් එක හැරෙන්න දිනය/ඔරලෝසුව.
2. භාවිතා කරන්න + සහ - buttons to set the current year, then press ඇතුල් කරන්න.
3. Repeat for month, day, hour, and minute.

4.2 Programming Watering Schedules (Programs A & B)

The controller supports two independent programs (A and B) for different watering needs.

4.2.1 Setting Start Times

1. ඩයල් එක හැරෙන්න TIME ආරම්භ කරන්න.
2. The display will show '1'. Use + සහ - to set the first start time, then press ඇතුල් කරන්න.
3. Continue setting up to 8 start times for the current program. To skip a start time, press ඇතුල් කරන්න without setting a time.
4. To switch between Program A and B, press the PROGRAM A-B බොත්තම.

4.2.2 Setting Run Times (How Long)

1. ඩයල් එක හැරෙන්න කොපමණ කාලයක් ද.
2. The display will show 'STATION 1'. Use + සහ - to set the watering duration (1-240 minutes) for Station 1, then press ඇතුල් කරන්න.
3. Repeat for each station (1-6).
4. To switch between Program A and B, press the PROGRAM A-B බොත්තම.

4.2.3 Setting Watering Days (How Often)

1. ඩයල් එක හැරෙන්න කොපමණ වාරයක්.
2. ඔබට විකල්ප තුනකින් තෝරා ගත හැකිය:
• Days of the Week: භාවිතා කරන්න දකුණු ඊතලය button to move to the desired day, then press ඇතුල් කරන්න to select/deselect.
• විරාමයන්: භාවිතා කරන්න + සහ - to set the interval (e.g., every 2 days).
• Even/Odd Days: Select 'EVEN' or 'ODD' for watering on even or odd calendar days.
3. To switch between Program A and B, press the PROGRAM A-B බොත්තම.

4.3 වැසි ප්‍රමාද විශේෂාංගය

The rain delay feature allows you to temporarily suspend your watering schedule for a set period.

1. ඩයල් එක හැරෙන්න ඔටෝ.
2. ඔබන්න වැසි ප්‍රමාදය බොත්තම.
3. භාවිතා කරන්න + සහ - buttons to select a delay of 24, 48, or 72 hours.
4. The controller will automatically resume the schedule after the delay period. To cancel, press පැහැදිලි.

4.4 Water Budgeting

The water budgeting feature allows you to adjust all programmed run times by a percentage, useful for seasonal adjustments without reprogramming each station.

1. ඩයල් එක හැරෙන්න අයවැය.
2. භාවිතා කරන්න + සහ - buttons to adjust the percentage (e.g., 50% to reduce watering by half, 150% to increase by 50%).
3. The change applies to all active programs and stations.

4.5 අතින් ක්රියා කිරීම

To manually water a specific station or all stations:

1. ඩයල් එක හැරෙන්න ඔටෝ.
2. ඔබන්න අත්පොත බොත්තම.
3. භාවිතා කරන්න දකුණු ඊතලය or වම් ඊතලය buttons to select the desired station or 'ALL' for all stations.
4. ඔබන්න ඇතුල් කරන්න.
5. භාවිතා කරන්න + සහ - to set the manual run time.
6. ඔබන්න ඇතුල් කරන්න අතින් ජලය දැමීම ආරම්භ කිරීමට.
7. අතින් ජලය දැමීම නැවැත්වීමට, ඔබන්න පැහැදිලි.

4.6 Turning Off the Controller

To stop all automatic watering, turn the dial to අක්රියයි. The controller will retain its programming.

5. නඩත්තු කිරීම

• Keep the controller clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Ensure the controller is not exposed to moisture or direct water spray.
• රැහැන් සම්බන්ධතා ආරක්ෂිත බව සහතික කිරීම සඳහා වරින් වර පරීක්ෂා කරන්න.
• During winter months in cold climates, it is recommended to disconnect the controller and store it indoors to prevent damage from freezing temperatures.

6. දෝශ නිරාකරණය

7. පිරිවිතර

8. වගකීම් සහ සහාය

For specific warranty information and detailed support, please refer to the official Orbit website or contact Orbit customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Orbit is a leading provider of watering solutions, committed to delivering quality products and customer satisfaction.

You can visit the official Orbit store for more information and product support: Orbit Store on Amazon