1. හැඳින්වීම
This manual provides essential instructions for the safe and effective operation of your Elinchrom ONE Off-Camera Flash. Please read this manual thoroughly before using the device to ensure proper setup, usage, and maintenance. Retain this manual for future reference.
The Elinchrom ONE is a portable off-camera flash unit featuring an integrated Li-Ion battery, designed for versatile lighting applications. Its compact size and robust construction make it suitable for various photographic environments.
2. පැකේජ අන්තර්ගතය
Verify that all items listed below are present in your Elinchrom ONE package:
- 1 x Elinchrom ONE Flash Head
- 1 x Diffusion Dome
- 1 x Wall Charger and Cable
- 1 x Elinchrom ONE Case
- 1 x 5.9' USB Type-C Cable
3. පිහිටුවීම
3.1 මූලික ආරෝපණය
Before first use, fully charge the integrated Li-Ion battery. The Elinchrom ONE features a built-in 41.04 Wh Li-Ion battery.
- Connect the provided USB Type-C cable to the flash unit's charging port.
- Connect the other end of the USB Type-C cable to the supplied 65W USB-C wall charger.
- වෝල් චාජරය බල සැපයුමකට සම්බන්ධ කරන්න.
ආරෝපණ වේලාවන්:
- Fast Charge (unit ON): Approximately 60 minutes to 80%, 100 minutes to 100%.
- Slow Charge (unit OFF): Approximately 80 minutes to 80%, 135 minutes to 100%.
The unit supports Active Charging, allowing operation while connected to a power source, regardless of the battery's charge level.
3.2 ෆ්ලෑෂ් ඒකකය සවි කිරීම
The Elinchrom ONE features a standard 5/8" receiver with dual-axis mounting for attachment to light stands or other grip equipment.
- Loosen the mounting knob on the flash unit's stand mount.
- Slide the flash unit onto the 5/8" spigot of a light stand.
- Tighten the mounting knob securely to prevent movement.
3.3 ආලෝක විකරණකාරක සවි කිරීම
The Elinchrom ONE is compatible with Elinchrom OCF and Profoto OCF light shapers. An included adapter allows compatibility with standard Elinchrom modifiers.
- To attach an OCF modifier, align the modifier with the flash head and twist until it locks into place.
- For standard Elinchrom modifiers, first attach the provided adapter to the flash head, then mount the modifier onto the adapter.
- The tilt head also includes an umbrella fitting (7 to 8 mm) for attaching umbrellas.
4. මෙහෙයුම් උපදෙස්
4.1 බලය සක්රිය / අක්රිය
To power on the Elinchrom ONE, press and hold the power button located on the control panel until the screen illuminates. To power off, press and hold the power button again until the screen shuts down.
4.2 ෆ්ලෑෂ් මාදිලි
The Elinchrom ONE supports the following flash modes:
- අත්පොත මාදිලිය: ෆ්ලෑෂ් බල ප්රතිදානය මත නිරවද්ය පාලනයට ඉඩ සලසයි.
- TTL (කාච හරහා) මාදිලිය: Automatically adjusts flash output for correct exposure. Requires a Skyport Transmitter Pro.
- HSS (High-Speed Sync) Mode: Enables flash synchronization at shutter speeds faster than the camera's native sync speed. Requires a Skyport Transmitter Pro.
Adjust flash power within a 5 F-stop range, from 7 to 131 Ws, using the rotary dial or touchscreen interface.
4.3 ආකෘති නිර්මාණය එල්amp
The integrated modeling lamp is a 20W Bicolor LED with a CRI of 95, providing 3000 Lumens (equivalent to a 120W halogen lamp).
- වර්ණ උෂ්ණත්වය: Adjustable presets from 2700 K to 6500 K.
- ධාවන කාලය: Up to 10 hours at minimum power, or 90 minutes at maximum power (modeling lamp පමණි).
Access and adjust modeling lamp settings via the touchscreen interface.
4.4 අවුලුවාලීම
The Elinchrom ONE features a built-in Skyport radio receiver and Bluetooth connectivity.
- Skyport: Supports 20 channels and 4 groups. Radio range is up to 60m indoors and 200m outdoors.
- බ්ලූටූත්: Version 4.2 built-in, compatible with Elinchrom Studio Software for Windows, Mac, and iOS devices.
4.5 බැටරි කළමනාකරණය
The integrated Li-Ion battery provides approximately 750 full-power flashes (LED lamp OFF) or 550 full-power flashes (LED lamp ON 100%) on a single charge. Refer to Section 3.1 for charging instructions.
5. නඩත්තු කිරීම
- පිරිසිදු කිරීම: Use a soft, dry cloth to clean the exterior of the flash unit. Avoid abrasive cleaners or solvents.
- Flash Tube Replacement: The flash tube is user-replaceable (SKU: EL24091). Refer to the detailed instructions provided with the replacement flash tube for proper installation.
- ගබඩා: Store the unit in its protective case in a cool, dry place when not in use.
6. දෝශ නිරාකරණය
If you encounter issues with your Elinchrom ONE, consider the following general troubleshooting steps:
- ඒකකය ක්රියාත්මක නොවේ: Ensure the battery is sufficiently charged. Connect the unit to the charger and attempt to power on.
- ෆ්ලෑෂ් නොදැමීම: Verify that the flash unit is properly synchronized with your camera's trigger (e.g., Skyport Transmitter Pro). Check flash mode settings (Manual, TTL, HSS).
- නොගැලපෙන ප්රතිදානය: Check battery level. Ensure no obstructions are blocking the flash sensor or light output.
- අධික උනුසුම් වීම: The unit features smart proactive cooling. If an overheating warning appears, allow the unit to cool down before continued use.
For persistent issues, consult the Elinchrom support webවෙබ් අඩවිය හෝ පාරිභෝගික සේවාව අමතන්න.
7. තාක්ෂණික පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| බලශක්තිය | 131 ඩබ්ලිව් |
| බල පරාසය | 5 F-Stops / 7 to 131 Ws |
| Flash Duration t0.1 (Normal Mode) | 1/1530s - 1/155s |
| Flash Duration t0.1 (Action Mode) | 1/7000s - 1/625s |
| Recycling Time (Min/Max) | 0.06s / 0.9s |
| ෆ්ලෑෂ් මාදිලි | Manual / TTL / HSS (requires Skyport Transmitter Pro) |
| Flash Color Temperature (Max Power) | 5900 K (ක්රියාව) / 5600 K (HSS) |
| බල ස්ථායිතාව | ±0.5% |
| විදුලි පංකාව සිසිල් | Yes, with Smart Proactive Cooling |
| User Replaceable Flash Tube | Yes (SKU: EL24091) |
| නැගී සිටින්න | Standard 5/8" Receiver with Dual Axis Mounting |
| Modifier Mount | Elinchrom OCF, Profoto OCF, Elinchrom (via included adapter) |
| Umbrella Fitting | 7 to 8 mm on Tilt Head |
| බැටරි වර්ගය | Built-in 41.04 Wh Li-Ion |
| ආකෘතිකරණය එල්amp ටයිප් කරන්න | 20W Bicolor LED CRI 95, 3000 Lumens |
| ආකෘතිකරණය එල්amp වර්ණ උෂ්ණත්වය | 2700 K සිට 6500 K දක්වා පෙරසිටුවීම් |
| ගුවන්විදුලි ග්රාහකයා | Built-in Skyport (20 Channels, 4 Groups) |
| ගුවන්විදුලි පරාසය | ගෘහස්ථ: මීටර් 60 දක්වා / එළිමහන්: මීටර් 200 දක්වා |
| බ්ලූටූත් | Version 4.2 Built-in |
| නිෂ්පාදන මානයන් | අඟල් 8.86 x 3.94 x 6.5 |
| අයිතමයේ බර | රාත්තල් 6.25 කි |
| අයිතම ආදර්ශ අංකය | 20932.1 |
| අනුකූල සවි කිරීම් | Canon, Nikon, Sony |
| ෆ්ලෑෂ් සමමුහුර්ත වේගය | තත්පර 1/8000 |
8. වගකීම් සහ සහාය
The Elinchrom ONE Off-Camera Flash (Model EL20932.1) typically comes with a 2-year Elinchrom USA manufacturing warranty. Please refer to your purchase documentation or the official Elinchrom webනිශ්චිත වගකීම් නියමයන් සහ කොන්දේසි සඳහා අඩවිය.
For technical support, service, or further inquiries, please visit the official Elinchrom webඅඩවියට හෝ ඔවුන්ගේ බලයලත් සේවා මධ්යස්ථාන අමතන්න.
