Intel NUC 10 කාර්ය සාධනය NUC10i5FNKN Barebone පද්ධති පරිශීලක අත්පොත

1. හැඳින්වීම

This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your Intel NUC 10 Performance NUC10i5FNKN Barebone System. The Intel NUC (Next Unit of Computing) is a small form factor PC kit designed for flexibility and customization. As a barebone system, it requires the user to install memory (RAM), storage (SSD/HDD), and an operating system to become fully functional.

Please read this manual carefully before beginning the installation process to ensure proper setup and operation.

රූපය 1: Intel NUC 10 Performance NUC10i5FNKN Barebone System. This image shows the compact design of the NUC, featuring a black chassis with various ports on the front and ventilation on the side.

2. පෙට්ටියේ ඇති දේ

සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:

• NUC 10 Performance kit - NUC10i5FNKN
• US Cord (Power Adapter)

Note: Memory, storage, and operating system are not included and must be purchased separately.

3. පිහිටුවීම සහ ස්ථාපනය

This section guides you through the physical installation of components and initial setup.

3.1. මතකය (RAM) ස්ථාපනය කිරීම

1. Unscrew the bottom cover of the NUC chassis.
2. Locate the DDR4 SO-DIMM slots on the motherboard.
3. Align the notch on the SO-DIMM module with the notch in the slot.
4. Insert the module at a 45-degree angle and push down until the retaining clips snap into place.
5. Repeat for additional memory modules if applicable.

3.2. Installing Storage (SSD/HDD)

The NUC10i5FNKN supports both M.2 SSDs and 2.5-inch SATA drives.

3.2.1. M.2 SSD ස්ථාපනය

1. මවු පුවරුවේ M.2 slot එක සොයා ගන්න.
2. Remove the small screw at the end of the M.2 slot.
3. M.2 SSD එක කෝණයකින් ස්ලොට් එකට ඇතුළු කරන්න.
4. Gently push down the SSD and secure it with the screw.

3.2.2. 2.5-inch SATA Drive Installation

1. Mount the 2.5-inch drive into the drive bay bracket (if provided).
2. Connect the SATA data and power cables from the motherboard to the drive.
3. Secure the drive bay bracket within the chassis.

After installing memory and storage, reattach the bottom cover.

3.3. පර්යන්ත සම්බන්ධ කිරීම

Connect your monitor, keyboard, mouse, and other necessary devices to the NUC.

රූපය 2: Front panel ports of the Intel NUC 10. This image highlights the front USB 3.1 Gen2 ports (Type-A and Type-C) for connecting various peripherals, along with the power button and headphone jack.

රූපය 3: Rear panel ports of the Intel NUC 10. This image displays the power input (19V), HDMI port, Ethernet port, two USB 3.1 Gen2 Type-A ports, and a USB-C port with Thunderbolt 3 support, allowing for diverse connectivity options.

• නිරීක්ෂණය: Connect your display to the HDMI port on the rear panel. The NUC supports up to 4096x2304 resolution.
• යතුරු පුවරුව/මූසිකය: Connect to any available USB ports (front or rear).
• ජාලය: Connect an Ethernet cable to the RJ45 port for wired network access.
• බලය: Connect the power adapter to the 19V DC input on the rear panel, then plug the power cord into an electrical outlet.

3.4. මෙහෙයුම් පද්ධති ස්ථාපනය

Once all hardware is installed and peripherals are connected, you will need to install an operating system (e.g., Windows 10, Linux). Refer to the operating system's installation guide for detailed steps. You may need to create a bootable USB drive for installation.

4. මෙහෙයුම් උපදෙස්

4.1. බල ගැන්වීම / අක්රිය කිරීම

• බල ගැන්වීම: Press the power button located on the front panel. The power button will illuminate when the system is on.
• විදුලිය විසන්ධි කිරීම: Use the operating system's shutdown procedure. Alternatively, press and hold the power button for 4 seconds to force a shutdown (use only when necessary).

රූපය 4: Close-up of the Intel NUC 10 front panel, showing the illuminated power button. This button is used to turn the system on and off.

4.2. Using the SD Card Slot

The NUC 10 Performance features an SDXC card slot with UHS-II support on the left side panel. This allows for easy transfer of photos, videos, and other data from compatible memory cards.

• SD කාඩ්පත නිසි තැන ක්ලික් වන තුරු ස්ලොට් එකට ඇතුළු කරන්න.
• To eject, push the card in slightly until it springs out.

රූපය 5: පැත්ත view of the Intel NUC 10, highlighting the SDXC card slot with UHS-II support. This slot provides convenient access for reading and writing data from SD cards.

4.3. BIOS/UEFI සැකසුම්

To access the BIOS/UEFI settings, press the F2 key repeatedly during startup. This allows configuration of boot order, system settings, and advanced features.

5. නඩත්තු කිරීම

Proper maintenance ensures the longevity and optimal performance of your NUC.

5.1 පිරිසිදු කිරීම

• Keep the NUC in a clean, dust-free environment.
• Periodically clean the exterior with a soft, dry cloth.
• Use compressed air to gently clear dust from ventilation openings to maintain proper airflow and cooling. Ensure the system is powered off before cleaning.

5.2. මෘදුකාංග යාවත්කාලීන

• Regularly update your operating system, drivers, and BIOS/UEFI firmware. Visit the official Intel support website for the latest drivers and firmware for your NUC model.
• Keeping software up-to-date improves system stability, security, and performance.

6. දෝශ නිරාකරණය

මෙම කොටසින් ඔබට මුහුණ දීමට සිදුවිය හැකි පොදු ගැටළු සාකච්ඡා කෙරේ.

6.1. බලය නැත

• Ensure the power adapter is securely connected to both the NUC and a working electrical outlet.
• Verify the power cord is fully inserted into the power adapter.
• Test the electrical outlet with another device.

6.2. සංදර්ශක ප්‍රතිදානයක් නොමැත

• Check that the monitor is powered on and the video cable (HDMI) is securely connected to both the NUC and the monitor.
• මොනිටරය නිවැරදි ආදාන ප්‍රභවයට සකසා ඇති බවට වග බලා ගන්න.
• If using multiple monitors, try connecting only one.
• Reseat the RAM modules to ensure they are properly installed.

6.3. Operating System Not Booting

• Verify that the storage drive (SSD/HDD) is correctly installed and detected in the BIOS/UEFI settings.
• Check the boot order in BIOS/UEFI to ensure the correct drive is selected as the primary boot device.
• If you recently installed a new OS, ensure the installation media was created correctly.

For further assistance, refer to the Intel support webවෙබ් අඩවිය හෝ පාරිභෝගික සහාය අමතන්න.

7. පිරිවිතර

Key technical specifications for the Intel NUC 10 Performance NUC10i5FNKN:

8. වගකීම් සහ සහාය

8.1. නිෂ්පාදන වගකීම්

This Intel NUC product is covered by Intel's standard limited warranty. For specific terms, conditions, and duration of your warranty, please refer to the warranty information included with your purchase or visit the official Intel webවෙබ් අඩවිය. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

8.2 තාක්ෂණික සහාය

For technical assistance, driver downloads, firmware updates, and additional documentation, please visit the official Intel Support webඅඩවිය:

Intel NUC සහාය

When contacting support, have your product model number (NUC10i5FNKN) and serial number ready.