FOXWELL NT604 OBD2 Scanner and BT100 Pro Battery Tester User Manual

1. හැඳින්වීම

This manual provides comprehensive instructions for the operation and maintenance of your FOXWELL NT604 OBD2 Scanner and BT100 Pro Battery Tester. These devices are designed to assist in diagnosing vehicle issues and assessing battery health, providing valuable information for vehicle maintenance.

The FOXWELL NT604 is an advanced diagnostic scan tool capable of reading and clearing fault codes, displaying live data, and performing various tests on key vehicle systems. The FOXWELL BT100 Pro is a professional battery analyzer designed to test 12V batteries, providing accurate readings on battery voltage, CCA, internal resistance, and overall health.

2. පිහිටුවීම

2.1 උපාංගය ඇසුරුම් ඉවත් කිරීම

Carefully remove all components from the packaging. Verify that all items listed in the product packaging are present. Retain the packaging for future storage or shipping.

2.2 ආරම්භක බල-අප්

The NT604 scanner typically powers on when connected to a vehicle's OBD-II port. The BT100 Pro battery tester powers on when connected to a 12V battery.

Figure 2.1: The FOXWELL NT604 OBD2 Scanner and BT100 Pro Battery Tester.

3. මෙහෙයුම

3.1 FOXWELL NT604 OBD2 Scanner Operation

The NT604 scanner connects to your vehicle's On-Board Diagnostics II (OBD-II) port to access vehicle system information.

1. OBD-II තොට සොයා ගන්න: The OBD-II port is usually located under the dashboard on the driver's side.
2. ස්කෑනරය සම්බන්ධ කරන්න: Plug the NT604's diagnostic cable into the vehicle's OBD-II port. The scanner will power on automatically.
3. Vehicle Communication: The scanner will attempt to establish communication with the vehicle's ECU (Engine Control Unit). Follow on-screen prompts.
4. ප්‍රධාන මෙනු සංචාලනය: Use the navigation buttons (up, down, left, right, OK, ESC) to select desired functions from the main menu. Common functions include:
   • කේත කියවන්න: Retrieves Diagnostic Trouble Codes (DTCs) from the vehicle's systems.
   • කේත හිස් කරන්න: Erases DTCs from the vehicle's memory. Note: Clearing codes does not fix the underlying problem. Address the issue before clearing codes.
   • සජීවී දත්ත: Displays real-time sensor data from the vehicle.
   • කැටි රාමුව: Captures a snapshot of vehicle operating conditions at the time a fault code was set.
   • මම/එම් සූදානම: විමෝචනයට අදාළ මොනිටරවල තත්ත්වය පරීක්ෂා කරයි.
   • System Diagnostic: Accesses specific vehicle systems like Engine, ABS, SRS (Airbag), and Transmission for detailed diagnostics.

Figure 3.1: The NT604 scanner's main menu showing various OBDII functions.

Figure 3.2: The NT604 scanner's capability to diagnose Engine, ABS, SRS, and Transmission systems.

3.2 FOXWELL BT100 Pro Battery Tester Operation

The BT100 Pro is designed for testing 12V automotive batteries. It can perform tests both in-vehicle and out-of-vehicle.

1. බැටරිය සූදානම් කරන්න: බැටරි පර්යන්ත පිරිසිදු බවත් විඛාදනයෙන් තොර බවත් සහතික කර ගන්න.
2. පරීක්ෂකය සම්බන්ධ කරන්න:
   • රතු cl සම්බන්ධ කරන්නamp ධනාත්මක (+) බැටරි පර්යන්තයට.
   • කළු cl එක සම්බන්ධ කරන්නamp සෘණ (-) බැටරි පර්යන්තයට.
   • පරීක්ෂකය ස්වයංක්‍රීයව ක්‍රියාත්මක වනු ඇත.
3. Select Test Type:
   • In-Vehicle Test: For batteries installed in the vehicle.
   • Out-of-Vehicle Test: For standalone batteries.
4. බැටරි වර්ගය තෝරන්න: Choose the correct battery type (e.g., Regular Flooded, AGM Flat Plate, AGM Spiral, GEL) from the menu. Incorrect selection may lead to inaccurate results.
5. Enter CCA Rating: Input the Cold Cranking Amps (CCA) rating found on the battery label.
6. Perform Test: The tester will perform the analysis and display results such as:
   • වෙළුමtage
   • මනින ලද CCA
   • අභ්යන්තර ප්රතිරෝධය
   • සෞඛ්‍ය තත්වය (SOH)
   • රාජ්ය ගාස්තු (SOC)

Figure 3.3: The BT100 Pro supports both in-vehicle and out-of-vehicle battery testing.

Figure 3.4: The BT100 Pro provides detailed battery status including internal resistance, CCA, and health display.

4. නඩත්තු කිරීම

4.1 පිරිසිදු කිරීම

උපාංගය මෘදු, ඩී සමඟ පිස දමන්නamp cloth. Do not use abrasive cleaners or solvents. Ensure the device is dry before storage.

4.2 මෘදුකාංග යාවත්කාලීන

Periodically check the FOXWELL official website for software updates for the NT604 scanner. Updates can improve performance, add new features, and expand vehicle compatibility. Follow the instructions provided on the website for updating the device firmware.

4.3 ගබඩා කිරීම

Store the devices in a clean, dry environment, away from extreme temperatures and direct sunlight. Keep cables neatly coiled to prevent damage.

5. දෝශ නිරාකරණය

6. පිරිවිතර

FOXWELL NT604 OBD2 ස්කෑනරය

• සහාය දක්වන පද්ධති: Engine, ABS, SRS (Airbag), Transmission
• OBDII Modes: 10 modes (Read Codes, Clear Codes, Live Data, Freeze Frame, I/M Readiness, Component Test, O2 Monitor Test, On-Board Monitor Test, Retrieve Vehicle Info, Modules Present)
• බලශක්ති ප්රභවය: වාහන OBD-II තොට

FOXWELL BT100 Pro Battery Tester

• බැටරි වෙළුමtage: 12V
• පරීක්ෂණ පරාසය: 100-1100 සීසීඒ
• සහාය දක්වන බැටරි වර්ග: Regular Flooded, AGM Flat Plate, AGM Spiral, GEL
• පරීක්ෂණ ප්රතිඵල: වෙළුමtage, CCA, Internal Resistance, State of Health (SOH), State of Charge (SOC)
• බලශක්ති ප්රභවය: Battery Powered (from the tested battery)

රූපය 6.1: උදාample of battery test results displayed on the BT100 Pro.

7. වගකීම් සහ සහාය

7.1 වගකීම් තොරතුරු

FOXWELL products are covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official FOXWELL webසවිස්තරාත්මක වගකීම් නියමයන් සහ කොන්දේසි සඳහා අඩවිය.

7.2 තාක්ෂණික සහාය

For technical assistance, software updates, or service inquiries, please contact FOXWELL customer support. Contact information can typically be found on the official FOXWELL webඅඩවියේ හෝ නිෂ්පාදන ඇසුරුම්වල.

Webඅඩවිය: www.foxwelltech.com (උදාample link, verify official site)