Stadler Form Eva Humidifier උපදෙස් අත්පොත

1. හැඳින්වීම

The Stadler Form Eva humidifier is a powerful and precise device designed to improve indoor air quality by maintaining optimal humidity levels. Equipped with advanced features like WiFi connectivity, an external humidity sensor, and automatic mode, Eva ensures a comfortable and healthy environment in rooms up to 860 sq ft.

The Stadler Form Eva humidifier, shown here with its external humidity sensor.

ප්රධාන ලක්ෂණ:

• Precise Humidification: Adaptive Humidity Technology automatically adjusts humidification for quiet and efficient operation.
• External Humidity Sensor: Ensures accurate humidity readings and doubles as a remote control for convenient operation.
• බලවත් ප්රතිදානය: Utilizes ultrasonic technology to release mist high into the room, covering areas up to 860 sq ft.
• උණුසුම් මීදුම ක්‍රියාකාරිත්වය: Features a water pre-heating system for increased humidification performance and a pleasantly warm mist.
• සකස් කළ හැකි සැකසුම්: Five humidification levels and selectable humidity from 30% to 75%.
• සුවඳ විසරණය: Suitable for use with fragrant oils to enhance your environment.
• Dimmable LEDs: Adjustable LED lights for comfortable use in any setting.
• WiFi සම්බන්ධතාවය: Control Eva effortlessly through a dedicated app via Wi-Fi.

2. සැකසුම් මාර්ගෝපදේශය

Follow these steps for the initial setup of your Stadler Form Eva humidifier:

1. ඇසුරුම් ඉවත් කර ස්ථානය: Carefully remove all packaging materials. Place the Eva humidifier on a flat, stable surface. Ensure there is adequate space around the unit for optimal mist distribution. The external sensor should be placed a short distance away from the main unit, ideally on a table or shelf, to accurately measure room humidity.
2. ජල ටැංකිය පුරවන්න: Remove the water tank from the main unit. Unscrew the cap and fill the tank with clean, cool tap water. For best results and to minimize mineral buildup, consider using distilled or demineralized water. Securely replace the cap and reinsert the water tank into the unit.
3. Insert Water Cube and AntiCalc Cartridge: The Eva humidifier comes with a Water Cube and an AntiCalc Cartridge. Ensure these are properly installed in their designated compartments within the water tank or base unit as per the detailed instructions in the full user manual. The AntiCalc Cartridge helps reduce limescale, while the Water Cube maintains water freshness.
4. බලයට සම්බන්ධ කරන්න: විදුලි රැහැන සුදුසු විදුලි අලෙවිසැලකට සම්බන්ධ කරන්න. ඒකකය පොරොත්තු ප්‍රකාරයට ඇතුළු වනු ඇත.

3. මෙහෙයුම් උපදෙස්

බල ගැන්වීම / අක්රිය කිරීම

Press the power button on the unit or the remote sensor to turn the humidifier on or off. The display will illuminate when the unit is active.

Using the External Humidity Sensor and Remote Control

The external humidity sensor not only provides precise humidity readings but also functions as a convenient remote control. Place it away from the main unit to ensure accurate measurement of the room's overall humidity, rather than just the immediate area around the humidifier. Use the buttons on the remote sensor to adjust settings from a distance.

ආර්ද්රතා මට්ටම් සැකසීම

You can set your desired humidity level between 30% and 75%. Use the 'Hydrostat' button on the unit or remote to cycle through the desired humidity percentages. You can also select continuous operation (CO) for constant mist output.

Auto Mode and Adaptive Humidity Technology

In Auto Mode, the Eva humidifier automatically adjusts its humidification level to quietly and energy-efficiently reach and maintain your set humidity. This intelligent technology ensures optimal comfort without constant manual adjustments.

Eva's Auto Mode efficiently adjusts humidification to maintain desired levels.

උණුසුම් මීදුම් කාර්‍යය

Activate the warm mist function for a faster increase in humidity and a more comfortable mist, especially in colder environments. This feature utilizes a pre-heating system to warm the water before nebulization.

Aroma Diffusion

The Eva humidifier includes a dedicated compartment for aroma diffusion. Simply add a few drops of your preferred fragrant oil to the aroma pad in the designated tray. The mist will then carry the scent throughout the room.

Dimmable LED Display

The LED lights on the unit can be dimmed to suit your preference, ensuring they do not disturb you, particularly during nighttime use.

4. නඩත්තු කිරීම

Regular maintenance is crucial for the longevity and optimal performance of your Eva humidifier. Always unplug the unit before cleaning or replacing parts.

නිතිපතා පිරිසිදු කිරීම

• දිනපතා: Refill the water tank with fresh water daily.
• සතිපතා: Clean the water tank and base unit to prevent mineral buildup and mold growth. Use a soft brush or cloth and a descaling agent (e.g., citric acid or vinegar solution) to remove any limescale. Rinse thoroughly.
• මාසිකව: Perform a more thorough cleaning of all accessible parts, including the ultrasonic membrane and the mist outlet. Refer to the full user manual for detailed cleaning instructions and recommended cleaning agents.

Water Cube Replacement

The Water Cube helps keep the humidifier fresh and clean. It should be replaced approximately once a year, or more frequently depending on water quality and usage.

AntiCalc Cartridge Replacement

The AntiCalc Cartridge reduces the calcification of water, minimizing white dust and limescale buildup. The lifespan of the cartridge depends on the water hardness. Replace the cartridge when you notice increased white dust or reduced mist output. A water hardness test strip is included to help determine replacement frequency.

5. දෝශ නිරාකරණය

If you encounter issues with your Eva humidifier, try the following common troubleshooting steps:

• මීදුම නොමැති ප්‍රතිදානය: Check if the water tank is properly seated and filled. Ensure the unit is powered on and not in standby mode. Clean the ultrasonic membrane if it appears dirty or scaled.
• අසාමාන්ය ශබ්දය: Verify that the unit is placed on a stable, level surface. Check for any foreign objects in the water tank or mist outlet. Ensure all components are correctly assembled.
• White Dust Around Unit: This indicates mineral content in your water. Ensure the AntiCalc Cartridge is properly installed and not expired. Consider using distilled or demineralized water to eliminate white dust.
• Mold or Odor: This is typically due to stagnant water or insufficient cleaning. Thoroughly clean the water tank and base unit with a descaling and disinfectant solution. Replace the Water Cube. Always use fresh water.
• Remote Sensor Not Responding: Check the battery in the remote sensor. Ensure there are no obstructions between the sensor and the main unit.

For more detailed troubleshooting or persistent issues, please refer to the complete user manual or contact customer support.

6. තාක්ෂණික පිරිවිතර

7. වගකීම් සහ සහාය

Stadler Form products are designed for quality and durability. For detailed information regarding your product's warranty, please refer to the warranty section in the complete user manual. Keep your proof of purchase for any warranty claims.

PDF ආකෘතියෙන් සවිස්තරාත්මක පරිශීලක අත්පොතක් බාගත කිරීම සඳහා තිබේ: Stadler Form Eva User Manual (PDF)

For technical support, spare parts, or further assistance, please visit the official Stadler Form website or contact their customer service department. Contact details can typically be found in your product packaging or on the manufacturer's webඅඩවිය.