SKYRC T100 Dual Balance Charger Instruction Manual

1. හැඳින්වීම

The SKYRC T100 is a twin-channel balance charger designed for various battery chemistries. It features two independent charging circuits, allowing simultaneous charging of different battery types and configurations. This charger is suitable for LiPo, LiFe, LiIon, LiHV, NiMH, NiCd, and Pb batteries, offering a maximum charging power of 100W (50W per channel) and a charging current of up to 5A.

Its compact design includes convenient front-loading balance and XT60 ports, enhancing ease of use and safety.

2. ආරක්ෂිත උපදෙස්

Read all instructions and warnings carefully before use. Failure to do so may result in property damage, personal injury, or death.

• ක්‍රියාත්මක වන විට කිසිවිටකත් චාජරය අතපසු නොකරන්න.
• Ensure the charger is connected to an AC 100-240V power source only.
• Do not attempt to charge damaged or swollen batteries.
• Always use the correct battery type and cell count settings for your battery. Incorrect settings can cause fire or explosion.
• Charge batteries in a fire-safe area, away from flammable materials.
• Keep the charger away from moisture, heat, and direct sunlight.
• Do not short-circuit the charging outputs.
• දරුවන්ට ළඟා විය නොහැකි ලෙස තබා ගන්න.
• භාවිතයේ නොමැති විට බල සැපයුම විසන්ධි කරන්න.

3. නිෂ්පාදන ලක්ෂණ

• Dual-Channel Charging: Two independent circuits for simultaneous charging of different battery types and configurations.
• Multi-Chemistry Support: Compatible with LiPo, LiFe, LiIon, LiHV (2-4 cells), NiMH, NiCd (6-8 cells), and Pb (6/12V) batteries.
• Integrated XT60 Connectors: Embedded XT60 ports for convenient and secure connection, preventing reverse polarity.
• ඉහළ වෙළුමtagඉ නිරවද්‍යතාව: බැටරි පරිමාව පෙන්වයිtage with three decimal places for precise monitoring during charging and measurement.
• AGM & Cold Charge Modes: Supports charging of Absorbent Glass Mat (AGM) batteries and allows charging of Pb batteries at low temperatures.
• සංයුක්ත නිර්මාණය: Space-saving form factor with front-loading ports.
• ආරක්ෂිත ටයිමරය: Adjustable safety timer (1-720 minutes & OFF) to prevent overcharging.

රූපය 3.1: ඉදිරිපස view of the SKYRC T100 Dual Balance Charger, showing the LCD display, control buttons, and dual charging ports with XT60 connectors.

Image 3.2: Illustration highlighting the multi-purpose charging capabilities and compact size of the SKYRC T100 charger, indicating 5A and 50W per channel.

Image 3.3: The SKYRC T100 charger with two batteries connected, demonstrating its twin-channel charging feature. The display shows charging status for both channels A and B.

Image 3.4: Close-up of the SKYRC T100's LCD display, showing battery voltage with three decimal places, indicating high measurement accuracy.

Image 3.5: The SKYRC T100 charger depicted in a cold, snowy environment, illustrating its capability to charge PB batteries using AGM and Cold Charge modes at low temperatures.

රූපය 3.6: සමීප රූපය view of the embedded XT60 battery connectors on the SKYRC T100 charger, designed for secure and convenient battery connection.

4. පැකේජ අන්තර්ගතය

• 1x SKYRC T100 Dual Balance Charger
• 1x AC බල කේබලය
• උපදෙස් අත්පොත (මෙම ලේඛනය)

5. පිහිටුවීම

1. ඇසුරුම්: චාජරය සහ සියලුම උපාංග ඇසුරුම්කරණයෙන් ප්‍රවේශමෙන් ඉවත් කරන්න.
2. බල සම්බන්ධතාවය: Connect the supplied AC power cord to the charger's AC input port and then plug it into a suitable AC 100-240V wall outlet. The charger will power on, and the LCD display will illuminate.
3. බැටරි සම්බන්ධතාවය: For each battery you wish to charge, connect its main power lead to the XT60 port (A or B) and its balance lead (if applicable) to the corresponding balance port (2-4S) on the charger. Ensure correct polarity.

6. මෙහෙයුම් උපදෙස්

The SKYRC T100 features four control buttons: BATT/PROG Stop, DEC STATUS (left arrow), INC STATUS (right arrow), and ආරම්භය ENTER කරන්න.

6.1 මෙනුව සංචාලනය කිරීම

• භාවිතා කරන්න DEC STATUS සහ INC STATUS buttons to scroll through menu options or adjust values.
• ඔබන්න ආරම්භය ENTER කරන්න තේරීමක් තහවුරු කිරීමට හෝ උප මෙනුවක් ඇතුළත් කිරීමට.
• ඔබන්න BATT/PROG Stop to go back to the previous menu or stop an ongoing process.

6.2 Charging Procedure (General)

1. නාලිකාව තෝරන්න: The charger will typically display information for both channels. Use the arrow buttons to highlight the channel (A or B) you wish to configure.
2. බැටරි වර්ගය තෝරන්න: ඔබන්න ආරම්භය ENTER කරන්න to enter the battery type selection. Use the arrow buttons to choose the correct battery chemistry (e.g., LiPo, NiMH, Pb) and press ආරම්භය ENTER කරන්න තහවුරු කිරීමට.
3. Set Charge Mode: Select the desired charge mode (e.g., Balance Charge, Fast Charge, Storage, Discharge for Lithium batteries; Charge for NiMH/NiCd/Pb).
4. පරාමිතීන් සකසන්න: Set the charge current (e.g., 0.1A-5.0A) and cell count/voltage (for Lithium batteries) using the arrow buttons. Ensure these settings match your battery's specifications.
5. ආරෝපණය ආරම්භ කරන්න: Once all parameters are set, press and hold the ආරම්භය ENTER කරන්න button for a few seconds to initiate the charging process. The charger will perform a pre-charge check.
6. ප්‍රගතිය නිරීක්ෂණය කරන්න: The LCD will display real-time charging information, including current, voltage, and charged capacity.
7. අයකිරීම නවත්වන්න: To stop charging at any time, press the BATT/PROG Stop button. The charger will automatically stop when the battery is fully charged.

6.3 Specific Charging Modes

• Balance Charge (LiPo/LiFe/LiIon/LiHV): Recommended for Lithium batteries to ensure all cells are charged to the same voltage, extending battery life. Requires balance lead connection.
• Charge (NiMH/NiCd/Pb): Standard charging mode for these battery types.
• AGM Mode (Pb Battery): Select this mode for Absorbent Glass Mat (AGM) lead-acid batteries.
• Cold Charge Mode (Pb Battery): Use this mode when charging Pb batteries in low-temperature environments.

7. නඩත්තු කිරීම

• පිරිසිදු කිරීම: Regularly clean the charger's exterior with a soft, dry cloth. Do not use solvents or abrasive cleaners.
• වාතාශ්රය: Ensure the charger's ventilation openings are clear of dust and debris to prevent overheating.
• ගබඩා: භාවිතයේ නොමැති විට සෘජු හිරු එළියෙන් සහ තෙතමනයෙන් ඈත්ව සිසිල් වියළි ස්ථානයක චාජරය ගබඩා කරන්න.
• කේබල් පරීක්ෂාව: Periodically inspect all cables and connectors for signs of wear or damage. Replace damaged components immediately.

8. දෝශ නිරාකරණය

• Charger does not power on:
  • Check if the AC power cord is securely connected to both the charger and the wall outlet.
  • Verify the wall outlet has power.
• Charging does not start:
  • Ensure the battery is correctly connected to the charger (main and balance leads, if applicable).
  • Verify that the battery type and cell count settings match the connected battery.
  • Check for any error messages on the LCD display and refer to the manual for their meaning.
  • Ensure you have pressed and held the ආරම්භය ENTER කරන්න button to initiate charging.
• දෝෂ පණිවිඩය දර්ශනය විය:
  • Common errors include 'Connection Break', 'Cell Error', 'Voltage Error'. Consult the full manual for specific error code interpretations and solutions.
  • Disconnect and reconnect the battery, then restart the charging process.
• Battery not fully charged:
  • Check the set charge current; a lower current will take longer.
  • Ensure the safety timer is not set too short.
  • Verify the battery's health; a degraded battery may not reach full capacity.

9. පිරිවිතර

Image 9.1: Diagram showing the dimensions of the SKYRC T100 charger: 90mm width, 100mm depth, and 127mm height.

10. වගකීම් සහ සහාය

SKYRC products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official SKYRC webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔබේ ප්‍රදේශයේ බෙදාහරින්නා අමතන්න. මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.