හැඳින්වීම
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your XTRARM TiTon 100 cm TV Wall Mount. Please read this manual thoroughly before installation to ensure correct setup and to prevent damage to the product or injury.
The XTRARM TiTon wall mount is designed to securely attach medium and large televisions to a wall, offering flexibility in viewing angles through its articulated arm, tilt, swivel, and rotation capabilities.
ආරක්ෂිත තොරතුරු
- බර ධාරිතාව: Do not exceed the maximum load capacity of 60 kg (132 lbs). Exceeding this limit can result in serious injury or property damage.
- බිත්ති වර්ගය: Ensure the mounting surface can safely support the combined weight of the mount and your television. Consult a professional if unsure about your wall's structural integrity.
- ස්ථාපනය: Improper installation may cause serious injury. Follow all instructions carefully. If you have any doubts, contact a qualified installer.
- මෙවලම්: ස්ථාපනය සඳහා සුදුසු මෙවලම් භාවිතා කරන්න. අවශ්ය පරිදි ආරක්ෂිත කණ්නාඩි සහ අනෙකුත් ආරක්ෂක ආම්පන්න පළඳින්න.
- දරුවන්: Keep children away from the installation area. Small parts may be a choking hazard.
- කේබල් කළමනාකරණය: Ensure all cables are routed safely and are not pinched or under tension to prevent damage and tripping hazards.
පැකේජයේ අන්තර්ගතය
Verify that all components are present and undamaged before beginning installation. Standard mounting hardware is included.
රූපය 1: ඉවරයිview of the XTRARM TiTon 100 cm TV Wall Mount components. This image displays the main articulated arm assembly and the TV mounting plate.
- බිත්ති තහඩු එකලස් කිරීම
- ප්රකාශිත හස්තය
- TV Mounting Plate
- Standard Mounting Hardware (screws, anchors, washers, spacers)
- විදුම් සැකිල්ල
- Bubble Level (often included with standard hardware)
පිරිවිතර
| ආදර්ශ අංකය | XTR-LA2050-600 |
| නිර්දේශිත රූපවාහිනී ප්රමාණය | Approximately 42-85 inches (107-191 cm) |
| උපරිම බර පැටවීමේ ධාරිතාව | 60 kg (රාත්තල් 132) |
| VESA Compatibility (Max) | 600 x 400 මි.මී |
| චලන වර්ගය | Articulated, Swivel, Turn, Tilt, Rotate |
| ඇල පරාසය | -5 ° සිට +15 ° දක්වා |
| Swivel/Rotation Range | 180° (depending on TV size and wall distance) |
| Wall Distance (Min/Max) | 11.4 cm / 100 cm (4.5 inches / 39.37 inches) |
| ද්රව්ය | ඇලෝයි වානේ |
| වර්ණය | සුදු |
| කේබල් කළමනාකරණය | ඔව් |
| බිත්ති තහඩු ප්රමාණය | 48 x 28.8 සෙ.මී |
රූපය 2: Detailed dimensions of the XTRARM TiTon wall mount and its range of motion, including extension, swivel, and tilt capabilities.
රූපය 3: VESA compatibility chart for the XTRARM TiTon mount, indicating supported TV sizes from 42 to 85 inches and various VESA patterns.
රූපය 4: The XTRARM TiTon mount is designed to safely support televisions up to 60 kilograms (132 lbs).
සැකසුම සහ ස්ථාපනය
Before you begin, ensure you have all necessary tools (e.g., drill, stud finder, level, screwdriver, wrench) and that your wall can support the weight. It is recommended to have two people for installation.
1. Determine Wall Type and Location
Identify if your wall is solid concrete, brick, or wood stud. Different wall types require specific anchors and drilling techniques. Use a stud finder to locate wood studs if applicable. Choose a mounting location that allows for optimal viewing angles and movement of the articulated arm.
2. Attach TV Brackets to Television
- තිරයට හානි වීම වැළැක්වීම සඳහා ඔබේ රූපවාහිනියේ මුහුණ මෘදු, පිරිසිදු මතුපිටක් මත ප්රවේශමෙන් තබන්න.
- ඔබේ රූපවාහිනියේ පිටුපස VESA සවිකිරීමේ සිදුරු හඳුනා ගන්න.
- Select the appropriate screws, washers, and spacers from the provided hardware kit that fit your TV's VESA pattern.
- Attach the vertical TV brackets to the back of your television, ensuring they are securely fastened but not overtightened. The brackets should be centered horizontally on the TV.
3. Mount Wall Plate to Wall
- Hold the drilling template against the wall at your desired mounting height. Use a level to ensure it is perfectly horizontal. Mark the drill hole locations.
- Drill pilot holes at the marked locations according to the recommended drill bit size for your wall type and anchors.
- Insert wall anchors (if required for your wall type).
- Align the wall plate with the drilled holes and secure it to the wall using the provided lag bolts and washers. Tighten all bolts firmly.
4. Hang TV on Wall Plate
- ආධාරයෙන්, සවි කර ඇති වරහන් සහිත රූපවාහිනිය ප්රවේශමෙන් ඔසවන්න.
- Hook the TV brackets onto the wall plate assembly. Ensure the TV is securely seated on the mount.
- Engage any safety locking mechanisms on the TV brackets to prevent accidental dislodgement.
රූපය 5: The XTRARM TiTon TV Wall Mount installed on a wall with a television attached, shown in a retracted position.
මෙහෙයුම් උපදෙස්
The XTRARM TiTon mount offers various adjustments to optimize your viewඅත්දැකීමෙන්.
Adjusting Extension and Retraction
Gently pull or push the television to extend or retract the articulated arm. The mount allows for a wall distance between 11.4 cm and 100 cm.
රූපය 6: Illustration of the XTRARM TiTon mount's extension capabilities, showing the TV moving from a minimum distance of 114 mm to a maximum of 1000 mm from the wall.
ඇලවීම සකස් කිරීම
The TV can be tilted downwards by 5 degrees and upwards by 15 degrees. Locate the tilt adjustment mechanism (often a lever or knob) on the TV mounting plate, adjust to the desired angle, and secure it.
රූපය 7: Visual representation of the XTRARM TiTon mount's tilt range, allowing for adjustments from -5 degrees to +15 degrees.
Adjusting Swivel and Rotation
The articulated arm allows for up to 180 degrees of swivel, enabling you to turn the TV to face different areas of the room. The TV mounting plate also supports rotation for horizontal compensation or portrait viewing.
රූපය 8: Example of the XTRARM TiTon mount's swivel capability, demonstrating how the TV can be angled up to 90 degrees left or right from the wall.
රූපය 9: The XTRARM TiTon mount allows for a 90-degree rotation of the television, useful for specific viewing orientations or corner installations.
නඩත්තු කිරීම
- නිතිපතා චෙක්පත්: Periodically inspect the mount and all fasteners to ensure they remain secure. Retighten any loose screws or bolts.
- පිරිසිදු කිරීම: මෘදු වියළි රෙද්දකින් සවි කිරීම පිරිසිදු කරන්න. නිමාවට හානි කළ හැකි උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවක භාවිතා කිරීමෙන් වළකින්න.
- ලිහිසි තෙල්: The moving parts are designed for smooth operation. If any movement becomes stiff, a small amount of silicone-based lubricant can be applied to the joints, avoiding contact with electrical components.
දෝෂගවේෂණය
- Problem: TV is not level after installation.
- විසඳුම: The mount features horizontal compensation. Adjust the leveling screws on the TV mounting plate to achieve a perfectly horizontal alignment. Ensure the wall plate itself was installed level using a bubble level.
- Problem: Mount feels loose or unstable.
- විසඳුම: Immediately remove the TV from the mount. Recheck all wall mounting bolts and TV bracket screws for tightness. Ensure the wall type is appropriate and that anchors are correctly installed. If the issue persists, consult a professional installer.
- Problem: Difficulty moving the articulated arm.
- විසඳුම: Check for any obstructions. Ensure no cables are caught in the joints. A small amount of silicone lubricant can be applied to the pivot points if movement is stiff.
වගකීම් සහ සහාය
The XTRARM TiTon TV Wall Mount comes with a වසර 5ක වගකීමක්. මෙම වගකීම් සහතිකය සාමාන්ය භාවිතය යටතේ නිෂ්පාදන දෝෂ ආවරණය කරයි. වගකීම් හිමිකම් සඳහා කරුණාකර ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.
For technical support, missing parts, or warranty inquiries, please contact XTRARM customer service through the retailer where the product was purchased or visit the official XTRARM webසම්බන්ධතා තොරතුරු සඳහා අඩවිය.
නිෂ්පාදකයා: usa2nl B.V.
