1. හැඳින්වීම
This manual provides detailed instructions for the installation, operation, and troubleshooting of the VEDINDUST HDMI Splitter Extender 1x2. This device allows you to split one HDMI signal into two identical signals and extend them up to 50 meters (165 feet) over a single Cat5e/6/7 Ethernet cable, supporting 1080p resolution. It features EDID preset management and Power Over Cable (POC) technology, requiring power only at the Transmitter (TX) unit.
2. පැකේජ අන්තර්ගතය
පැකේජය විවෘත කිරීමෙන් පසු සියලුම අයිතම පවතින බවත් හොඳ තත්ත්වයේ පවතින බවත් තහවුරු කර ගන්න.
- 1x HDMI Extender Splitter (Transmitter Unit - TX)
- 2x HDMI Extender Receivers (RX Units)
- 1x 12V Power Adapter (for TX unit)
- 1x Pair of Fixed Hangers
- 1x පරිශීලක අත්පොත
Image: Contents of the VEDINDUST HDMI Splitter Extender package, showing the main transmitter unit, two receiver units, power adapter, mounting brackets, and user manual.
3 ප්රධාන ලක්ෂණ
- HDMI Splitter Extender: Splits one HDMI signal to two outputs and extends up to 50m (165ft) over Cat5e/6/7 cable.
- EDID Preset Management: Supports various EDID presets to optimize compatibility between source and display.
- Power Over Cable (POC): Only the Transmitter (TX) unit requires a 12V power supply; Receiver (RX) units are powered via the Ethernet cable.
- No Compression Transmission: Supports resolutions up to 1920x1200@60Hz and 1080p@60Hz.
- ශ්රව්ය ආකෘතිය සහාය: PCM / DTS / DSD.
- Auto EQ: Built-in automatic equalization algorithm for stable transmission over varying cable lengths.
- Recommended Cable Lengths: Cat6/7 - 50m, Cat5e - 40m, Cat5 - 30m.
4. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| ආදර්ශ අංකය | EX-HDMI |
| වෙළඳ නාමය | VEDINDUST |
| සම්බන්ධක වර්ගය | HDMI, RJ45 |
| කේබල් වර්ගය | Ethernet (Cat5e/6/7) |
| වරායන් ගණන | 1 HDMI In, 2 HDMI Out (local loop), 2 RJ45 Out |
| උපරිම විභේදනය | 1080p@60Hz, 1920x1200@60Hz |
| සම්ප්රේෂණ දුර | Up to 50m (165ft) with Cat6/7, 40m with Cat5e, 30m with Cat5 |
| බල සැපයුම | 12V DC (for TX unit), POC (for RX units) |
| ගැළපෙන උපාංග | PC, DVD Player, PlayStation, Television |
| මානයන් (පැකේජය) | 20.4 x 16.1 x 6.2 සෙ.මී |
| බර (පැකේජය) | ග්රෑම් 580 කි |
| UPC | 798610311257 |
5. නිෂ්පාදන රූප සටහන්
රූපය: අවසන්view of the VEDINDUST HDMI Splitter Extender system, showing the main transmitter unit and two compact receiver units.
රූපය: විස්තරාත්මක view of the Transmitter (TX) unit's front panel, indicating the ON/OFF switch, Power indicator, and HDMI input indicator.
රූපය: විස්තරාත්මක view of the Transmitter (TX) unit's rear panel, showing RJ45 outputs (CAT3, CAT4), HDMI loop-out ports (HDMI1, HDMI2), EDID DIP switch, HDMI input, and 12V DC power input.
6. සැකසුම් උපදෙස්
- HDMI මූලාශ්රය TX වෙත සම්බන්ධ කරන්න: Connect your HDMI source device (e.g., PC, DVD player, game console) to the HDMI-IN port on the Transmitter (TX) unit using a high-quality HDMI cable.
- Connect Local Displays (Optional): If you wish to use local displays, connect them to the HDMI 1 සහ HDMI 2 loop-out ports on the TX unit.
- Connect TX to RX Units: සම්බන්ධ කරන්න CAT3 සහ CAT4 RJ45 outputs on the TX unit to the respective RJ45 inputs on the two Receiver (RX) units using Cat5e/6/7 Ethernet cables. Ensure the cable lengths are within the recommended limits (50m for Cat6/7, 40m for Cat5e, 30m for Cat5).
- Connect Remote Displays to RX Units: Connect your remote HDMI display devices (e.g., TVs, projectors) to the HDMI පිටතට ports on each RX unit using high-quality HDMI cables.
- Power On TX Unit: Connect the provided 12V power adapter to the DC12V input on the TX unit. The RX units will receive power via the Ethernet cables (POC).
- Select EDID Mode: සකස් කරන්න EDID DIP ස්විචය on the TX unit according to your display and audio requirements. Refer to the EDID Mode section for detailed settings.
- සම්බන්ධතා තහවුරු කරන්න: Ensure all cables are securely connected. Power on all connected devices.
Image: A schematic diagram illustrating the connection process, showing an HDMI source connected to the TX unit, which then connects to two local displays and two remote RX units via Cat5e/6/7 cables, leading to two remote displays.
රූපය: හිටපු කෙනෙක්ample setup showing the VEDINDUST HDMI Splitter Extender used in a conference room environment, connecting a laptop to multiple displays via the extender system.
7. මෙහෙයුම් උපදෙස්
7.1 බලය සක්රිය / අක්රිය
- Ensure the 12V power adapter is connected to the TX unit.
- භාවිතා කරන්න සක්රිය / අක්රිය switch on the front panel of the TX unit to power the system on or off.
- The Power indicator LED on the TX unit will illuminate when powered on.
7.2 EDID Mode Selection
The EDID (Extended Display Identification Data) DIP switch allows you to select the optimal video and audio format for your connected displays. This helps ensure compatibility and the best possible output quality.
Image: Close-up of the EDID DIP switch on the Transmitter unit, showing the three switches labeled 1, 2, 3 and their ON/OFF positions.
Refer to the table below for common EDID settings:
| DIP Switch Setting (1-2-3) | EDID ප්රකාරය |
|---|---|
| 000 | 1080p 2CH Audio |
| 001 | 1080p 5.1CH Audio |
| 010 | 1080p 7.1CH Audio |
| 011 | 1080p 3D 2CH Audio |
| 100 | 1080p 3D 5.1CH Audio |
| 101 | 1080p 3D 7.1CH Audio |
| 110 | 1920x1200 2CH Audio |
| 111 | Copy HDMI OUT 1 EDID |
Note: "0" typically means the switch is in the OFF/down position, and "1" means the ON/up position. If you experience display issues, try different EDID settings or use the "Copy HDMI OUT 1 EDID" mode if a local display is connected to HDMI OUT 1.
8. නඩත්තු කිරීම
- උපාංගය සිසිල්, වියළි ස්ථානයක, සෘජු හිරු එළියෙන් සහ තාප ප්රභවයන්ගෙන් ඈත්ව තබා ගන්න.
- උපාංගය තෙතමනය හෝ අධික උෂ්ණත්වයට නිරාවරණය වීමෙන් වළකින්න.
- මෘදු වියළි රෙද්දකින් උපාංගය පිරිසිදු කරන්න. දියර හෝ එයරෙසෝල් පිරිසිදු කරන්නන් භාවිතා නොකරන්න.
- අධික උනුසුම් වීම වැළැක්වීම සඳහා ඒකක වටා නිසි වාතාශ්රය සහතික කරන්න.
9. දෝශ නිරාකරණය
- පින්තූරයක්/සංඥාවක් නැත:
- සියලුම HDMI සහ ඊතර්නෙට් කේබල් ආරක්ෂිතව සම්බන්ධ කර ඇති බවට වග බලා ගන්න.
- Verify the TX unit is powered on and the power indicator is lit.
- Check the length and quality of your Ethernet cables. Ensure they meet the recommended specifications (Cat5e/6/7).
- Try adjusting the EDID DIP switch settings on the TX unit to match your display's capabilities.
- Test with a different HDMI source or display to rule out device incompatibility.
- දිලිසෙන හෝ අතරමැදි සංඥාව:
- This can often be resolved by adjusting the EDID settings.
- Ensure Ethernet cables are not running near strong electromagnetic interference sources.
- හානි වූ කේබල් සඳහා පරීක්ෂා කරන්න.
- ශ්රව්ය නැත:
- Verify the EDID setting supports the desired audio format (e.g., 2CH, 5.1CH, 7.1CH).
- Check audio settings on your source device and display.
- POC Not Working (RX unit not powering on):
- Ensure the TX unit is powered by a 12V adapter. The RX units draw power from the TX unit via the Ethernet cable.
- Check the Ethernet cable for damage or improper termination.
10. වගකීම් සහ සහාය
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the VEDINDUST official webඅඩවිය. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.
