SEBSON LED Outdoor Luminaire with Motion Detector - Instruction Manual

1. හැඳින්වීම

Thank you for choosing the SEBSON LED Outdoor Luminaire with Motion Detector. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor light. Please read these instructions carefully before installation and retain them for future reference.

2. ආරක්ෂිත උපදෙස්

• දේශීය රැහැන් රෙගුලාසි වලට අනුකූලව සුදුසුකම් ලත් විදුලි කාර්මිකයෙකු විසින් ස්ථාපනය සිදු කළ යුතුය.
• Ensure the power supply is disconnected before installation, maintenance, or repair.
• This product is designed for outdoor use only (IP65 rated).
• Do not attempt to modify or repair the luminaire yourself. Contact qualified personnel for service.
• The integrated LEDs are non-replaceable. Do not attempt to remove or replace them.
• Avoid looking directly into the light source when it is active.

3. පැකේජ අන්තර්ගතය

සියලුම සංරචක පවතින බවත් හානි වී නොමැති බවත් තහවුරු කර ගන්න:

• SEBSON LED Outdoor Luminaire with Motion Detector (Model: WAL_SENSOR_L_INT)
• සවි කිරීමේ දෘඩාංග (ඉස්කුරුප්පු, බිත්ති ප්ලග්)
• උපදෙස් අත්පොත

4. නිෂ්පාදන ලක්ෂණ

• Integrated Motion Detector: PIR sensor with a detection range of 9 meters and a 140° angle.
• සකස් කළ හැකි සැකසුම්: Customize light sensitivity (3-2,000 LUX) and illumination duration (10 seconds - 5 minutes).
• භ්‍රමණය කළ හැකි ආලෝක හිස: The light can be rotated 90° vertically and 330° horizontally for optimal light direction.
• කල් පවතින ඉදිකිරීම්: Anthracite plastic casing with IP65 protection, suitable for outdoor environments.
• දීප්තිමත් ආලෝකකරණය: 15W, 1300lm, 6000K cool white light.

Image: Key features of the SEBSON LED outdoor luminaire, highlighting the motion detector, programmability, IP65 rating, and rotatable head.

Image: Illustration of the luminaire's rotatable head, showing 90° vertical and 330° horizontal adjustment capabilities.

5. පිහිටුවීම සහ ස්ථාපනය

වැදගත්: Ensure the main power supply is switched off before beginning installation.

1. ස්ථානය තෝරන්න: Select a suitable outdoor location for wall mounting, ensuring the motion detector has an unobstructed view of the desired detection area.
2. සවි කරන මතුපිට සකස් කරන්න: Mark the drilling points on the wall using the luminaire's mounting plate as a template.
3. සිදුරු සිදුරු: Drill holes at the marked positions and insert appropriate wall plugs.
4. රැහැන් ඇදීම: Connect the luminaire's electrical wires to your mains power supply. Ensure correct polarity (Live, Neutral, Earth). All connections must be secure and insulated.
5. ලුමිනෙයාර් කන්ද: Secure the luminaire to the wall using the provided screws. Ensure it is firmly attached.
6. ආලෝක හිස සකසන්න: Rotate the light head to the desired vertical (up to 90°) and horizontal (up to 330°) position.

රූපය: පසුපස view of the luminaire, showing the mounting plate and attachment points for installation.

6. Operating and Motion Sensor Settings

The motion detector has two adjustable settings: LUX (light sensitivity) and TIME (illumination duration).

1. Accessing Controls: The adjustment dials are located on the motion sensor. Gently rotate the sensor cover to reveal the dials.
2. LUX Setting (Light Sensitivity):
   • This dial controls the ambient light level at which the sensor activates the light.
   • Rotate towards the 'sun' symbol for activation during both day and night (high LUX).
   • Rotate towards the 'moon' symbol for activation only in low light conditions (low LUX, 3-2,000 LUX range).
3. TIME Setting (Illumination Duration):
   • This dial sets how long the light remains on after motion is detected.
   • Adjust from 10 seconds to 5 minutes.
4. හඳුනාගැනීමේ පරාසය: The motion sensor has a maximum detection range of 9 meters and a 140° angle. Consider the mounting height (recommended 1.80m - 2.50m) for optimal performance.

Image: Close-up of the motion sensor, showing the protective cover and the underlying LUX and TIME adjustment dials.

Image: Diagram illustrating how to access and adjust the LUX and TIME settings on the motion sensor.

Image: Diagram showing the motion detection range of the luminaire, indicating a 140° angle and a maximum distance of 9 meters.

7. නඩත්තු කිරීම

Regular maintenance ensures optimal performance and longevity of your luminaire.

• පිරිසිදු කිරීම: Clean the luminaire's surface with a soft, damp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවණ භාවිතා නොකරන්න.
• පරීක්ෂාව: Periodically check the luminaire and its wiring for any signs of damage or wear.
• LEDs: The integrated LEDs are designed for a long lifespan and are not user-replaceable.

8. දෝශ නිරාකරණය

ඔබට ගැටළු ඇති වුවහොත්, පහත පොදු ගැටළු සහ විසඳුම් වෙත යොමු වන්න:

මෙම විසඳුම් උත්සාහ කිරීමෙන් පසුවත් ගැටලුව පවතින්නේ නම්, කරුණාකර පාරිභෝගික සහාය අමතන්න.

9. පිරිවිතර

Image: Technical drawing showing the dimensions of the SEBSON LED outdoor luminaire in millimeters.

10. වගකීම් සහ සහාය

For warranty information and customer support, please refer to the retailer or manufacturer's official website. Specific details regarding spare parts availability and software updates are not provided in the product information.