1. හැඳින්වීම
This manual provides detailed instructions for the assembly, usage, and maintenance of your Yaheetech Full Size Upholstered Platform Bed Frame with Wing Edge Headboard. Please read all instructions carefully before beginning assembly to ensure safe and correct setup.
The bed frame features a classic design with a wing-side, channel-tufted headboard, skin-friendly linen fabric, and a sturdy wood-metal construction with wooden slats for mattress support. It is designed to be noise-free and does not require a box spring.
2 ආරක්ෂිත තොරතුරු
- Do not load more than 800 lbs on the bed frame.
- Assemble carefully to ensure stability.
- Be cautious around sharp edges on the wing headboard during assembly and use.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten fasteners.
- එකලස් කිරීමේදී කුඩා කොටස් ළමයින්ගෙන් ඈත් කරන්න.
3. පැකේජ අන්තර්ගතය
එකලස් කිරීමට පෙර, සියලුම සංරචක පවතින බවත් හානි වී නොමැති බවත් තහවුරු කර ගන්න. පැකේජයට සාමාන්යයෙන් ඇතුළත් වන්නේ:
- Upholstered Headboard (Part A)
- Upholstered Footboard (Part B)
- Upholstered Side Rails (Parts C1, C2)
- Headboard Side Posts (Parts D1, D2)
- Center Support Beam (Part G)
- Support Legs (Part H)
- Wooden Slats (Part F)
- Hardware Kit (Bolts, Washers, Allen Wrench, etc.)
- ස්ථාපන අත්පොත
Refer to the included installation manual for a complete list of parts and their corresponding labels.
4. එකලස් කිරීමේ උපදෙස්
Follow these steps for assembling your Yaheetech bed frame. It is recommended to have two people for assembly.
4.1. ඇසිරීම සහ සකස් කිරීම
- පෙට්ටියෙන් සියලුම සංරචක ප්රවේශමෙන් ඉවත් කරන්න.
- සීරීම් වළක්වා ගැනීම සඳහා සියලුම කොටස් මෘදු, පිරිසිදු මතුපිටක් මත තබන්න.
- Identify each part using the labels (A, B, C1, C2, D1, D2, F, G, H) and the hardware from the kit.
4.2. හෙඩ්බෝඩ් එකලස් කිරීම
- Attach the headboard side posts (D1 and D2) to the main headboard panel (A) using the specified bolts and washers from the hardware kit. Ensure the posts are oriented correctly as shown in the diagram.
- සියලුම සම්බන්ධතා ආරක්ෂිතව තද කරන්න.
4.3. Footboard and Side Rail Assembly
- Attach the footboard (B) to the side rails (C1 and C2) using the appropriate hardware. Pay attention to the orientation of the footboard legs.
- Connect the assembled side rails (C1 and C2) to the headboard assembly. Do not fully tighten all screws until the entire frame is assembled to allow for adjustments.
4.4. Center Support and Slats Installation
- Install the center support beam (G) and attach the support legs (H) to it.
- Place the wooden slats (F) across the bed frame, ensuring they are evenly spaced and secured according to the manual. The slats are designed for direct mattress placement, eliminating the need for a box spring.
- සියලුම සංරචක ස්ථානගත කර පෙළගස්වා ගත් පසු, සියලුම බෝල්ට් සහ ඉස්කුරුප්පු සම්පූර්ණයෙන්ම තද කරන්න.
වීඩියෝ: Assembly Guide for Yaheetech Wing Headboard Bed Frame. This video demonstrates the step-by-step process of assembling the bed frame, including attaching the headboard, footboard, side rails, and installing the wooden slats. It highlights the ease of assembly and the sturdy construction.

රූපය: Dimensional diagram of the Yaheetech Full Size Bed Frame. This image provides key measurements for the bed frame, including length, width, and headboard height, along with the recommended mattress size and maximum weight capacity.

රූපය: සවිස්තරාත්මක view of the bed frame's construction. This image showcases the channel tufted headboard, the robust wooden slat support system, and the sturdy bed legs, emphasizing the quality and design elements.
5. භාවිත මාර්ගෝපදේශ
- මෙට්ට අනුකූලතාව: This platform bed is designed to support a mattress directly on its wooden slats. No box spring is required. It is compatible with full, queen, and king size mattresses, with a recommended mattress height of 8-12 inches.
- බර ධාරිතාව: ඇඳ රාමුවේ උපරිම බර ධාරිතාව රාත්තල් 800 කි. ආරක්ෂාව සහ නිෂ්පාදනයේ කල්පැවැත්ම සහතික කිරීම සඳහා මෙම සීමාව ඉක්මවා නොයන්න.
- ඇඳ යට නිෂ්කාශනය: The bed frame provides approximately 6 inches of under-bed clearance, allowing for easy cleaning and limited storage of low-profile අයිතම.

රූපය: Under-bed space for cleaning. This image illustrates the 6-inch clearance beneath the bed frame, demonstrating how a robot vacuum can easily pass underneath for convenient cleaning.

රූපය: Mattress height compatibility guide. This diagram shows the recommended mattress height range (8-12 inches) for optimal fit and aesthetic with the bed frame.
6. නඩත්තු කිරීම
- රෙදි සත්කාර: The upholstered linen fabric should be dry cleaned only. Avoid using harsh chemicals or abrasive cleaners.
- සාමාන්ය පිරිසිදු කිරීම: For routine cleaning, gently vacuum the fabric to remove dust and debris. Spot clean with a damp cloth and mild detergent if necessary, testing on an inconspicuous area first.
- දෘඩාංග පරීක්ෂාව: Periodically inspect all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain the bed frame's stability and prevent squeaking.
- බිම් ආරක්ෂණය: The bed frame includes protective foot pads to prevent scratches on your floor. Ensure these remain in place.
7. දෝශ නිරාකරණය
If you encounter any issues with your Yaheetech bed frame, consider the following:
- කිවිසුම් ශබ්ද: Check all connection points and ensure bolts are securely tightened. The EVA foam on the center reinforced bearing bar is designed to minimize noise, but loose connections can still cause squeaks.
- අස්ථාවරත්වය: Verify that all parts are correctly assembled according to the manual and that all fasteners are fully tightened. Ensure the bed frame is placed on a level surface.
- නැතිවූ කොටස්: If any parts are missing or damaged upon arrival, please contact Yaheetech customer support immediately.
For further assistance, refer to the 'Warranty & Support' section.
8. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| වෙළඳ නාමය | Yaheetech |
| ආදර්ශ අංකය | YT-00109427-001 |
| ප්රමාණය | සම්පූර්ණයි |
| නිෂ්පාදන මානයන් | 78"අඟල් x 56"අඟල් x 43.5"උ |
| වර්ණය | නේවි බ්ලූ |
| ද්රව්ය | MDF, Linen Fabric, Foam, Metal |
| හිස් පුවරු ද්රව්ය | ලිනන් රෙදි |
| උපරිම බර ධාරිතාව | රාත්තල් 800 |
| නිර්දේශිත මෙට්ට ප්රමාණය | Full, Queen, King (for compatibility, actual frame is Full) |
| බිම් සිට අයිතමය දක්වා දුර | 4.3 Inches (approx. 6 inches clearance) |
| එකලස් කිරීම අවශ්ය වේ | ඔව් |
| නිෂ්පාදන සත්කාර උපදෙස් | වේලා සේදීමට පමණි |

රූපය: Visual representation of product specifications. This image displays the bed frame with an overlay detailing its standard size, materials, assembled dimensions, mattress compatibility, bedstead height, maximum weight capacity, item weight, shipping weight, and color.
9. වගකීම් සහ සහාය
යාහීටෙක් උසස් තත්ත්වයේ නිෂ්පාදන සහ පාරිභෝගික තෘප්තිය ලබා දීමට කැපවී සිටී.
- ප්රතිලාභ: දින 90ක පහසු ප්රතිලාභ භුක්ති විඳින්න.
- පාරිභෝගික සහාය: For any questions, concerns, or assistance with your product, please contact Yaheetech customer support. You can visit the official Yaheetech store on Amazon for more information and contact options: යාහීටෙක් වෙළඳසැල.
- ආරක්ෂණ සැලසුම්: Extended protection plans may be available for purchase. Refer to your purchase details for options.





