1. හැඳින්වීම
Thank you for choosing the LoraTap 868 MHz Wireless Remote Control. This manual provides essential information for the proper installation, operation, and maintenance of your remote control. Please read this manual thoroughly before use to ensure optimal performance and safety. This remote control is designed for use with LoraTap 868 MHz roller shutter modules and is not compatible with Wi-Fi modules.
2. නිෂ්පාදන අවසන්view
2.1 පැකේජයේ අන්තර්ගතය
- 1 x LoraTap 868 MHz Wireless Remote Control
- 1 x CR2 බැටරිය (පෙර ස්ථාපනය කර ඇත හෝ ඇතුළත් කර ඇත)
- 1 x වෝල් මවුන්ට් වරහන
2.2 නිෂ්පාදන විශේෂාංග
- රැහැන් රහිත පාලනය: Operates on the 868 MHz radio frequency band for extended range and ease of use.
- LoRaWAN Module Compatibility: Specifically designed for seamless integration and reliable remote control with LoRaWAN modules.
- Ergonomic Design: Compact and easy to hold, facilitating convenient operation for opening or closing roller shutters.
- විශ්වසනීය වෙළඳ නාමය: LoraTap products are known for their durability and optimal performance.
2.3 සංරචක හඳුනාගැනීම
Familiarize yourself with the components of your remote control:
රූපය 1: LoraTap 868 MHz Wireless Remote Control and Wall Mount Bracket. The remote control is white, elongated, with three circular buttons arranged vertically. The top button has an upward-pointing triangle icon, the middle button has a pause icon (two vertical lines), and the bottom button has a downward-pointing triangle icon. A small indicator light is visible above the top button. To the right of the remote is a white wall mount bracket with two screw holes.
- ඉහළ බොත්තම: Controls the roller shutter to move upwards.
- නැවතුම්/විරාම බොත්තම: Stops the roller shutter movement.
- පහළ බොත්තම: Controls the roller shutter to move downwards.
- LED දර්ශකය: Illuminates to indicate signal transmission or pairing status.
- වෝල් මවුන්ට් වරහන: Used to securely store the remote control on a wall.
3. පිහිටුවීම
3.1 බැටරි ස්ථාපනය
The remote control uses one CR2 battery. The battery may be pre-installed. If not, or if replacement is needed:
- දුරස්ථ පාලකයේ පිටුපස බැටරි මැදිරි කවරය සොයා ගන්න.
- Open the cover using a small screwdriver or by sliding it off.
- මැදිරිය තුළ දක්වා ඇති පරිදි නිවැරදි ධ්රැවීයතාව (+/-) සහතික කරමින් CR2 බැටරිය ඇතුළු කරන්න.
- බැටරි මැදිරි කවරය ආරක්ෂිතව වසා දමන්න.
3.2 Pairing with Roller Shutter Module
To control your roller shutters, the remote control must be paired with a compatible LoraTap 868 MHz roller shutter module. The exact pairing procedure may vary slightly depending on your specific module model. Always refer to the instruction manual of your LoraTap roller shutter module for detailed pairing instructions. A general pairing process typically involves:
- Put your LoraTap roller shutter module into pairing mode (often by pressing a button on the module for a few seconds).
- While the module is in pairing mode, press a specific button or combination of buttons on the remote control (e.g., the Stop button) for a few seconds.
- The LED indicator on the remote control or the module may flash to confirm successful pairing.
- Test the remote control to ensure it operates the roller shutter correctly.
4. මෙහෙයුම් උපදෙස්
4.1 මූලික මෙහෙයුම
Once paired, operating your roller shutter is straightforward:
- To Open/Raise the Shutter: ඔබන්න ඉහළ බොත්තම (upward-pointing triangle).
- To Stop the Shutter: ඔබන්න Stop/Pause Button (two vertical lines) while the shutter is moving.
- To Close/Lower the Shutter: ඔබන්න පහළ බොත්තම (downward-pointing triangle).
5. නඩත්තු කිරීම
5.1 පිරිසිදු කිරීම
ඔබගේ දුරස්ථ පාලකයේ පෙනුම සහ ක්රියාකාරීත්වය පවත්වා ගැනීමට:
- මෘදු වියළි රෙද්දකින් මතුපිට පිස දමන්න.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic.
5.2 බැටරි ප්රතිස්ථාපනය
If the remote control's range decreases or the LED indicator does not light up, the battery may need replacement. Follow the steps in Section 3.1 to replace the CR2 battery. Dispose of used batteries responsibly according to local regulations.
6. දෝශ නිරාකරණය
If you encounter issues with your LoraTap Wireless Remote Control, refer to the table below for common problems and solutions:
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| දුරස්ථ පාලකය ප්රතිචාර නොදක්වයි. | අඩු හෝ මිය ගිය බැටරිය. | Replace the CR2 battery (see Section 5.2). |
| Remote control cannot connect or pair with the module. | Module not in pairing mode; incorrect pairing procedure; remote control out of range. | Ensure the roller shutter module is in pairing mode. Follow the specific pairing instructions for your module. Move closer to the module during pairing. |
| අඩු කළ මෙහෙයුම් පරාසය. | Low battery; signal interference. | Replace the battery. Ensure there are no large metal objects or other strong radio frequency devices between the remote and the module. |
| Roller shutter moves in the wrong direction. | Module motor direction setting is incorrect. | This is typically adjusted on the roller shutter module itself. Refer to your module's manual for motor direction reversal instructions. |
7. පිරිවිතර
Key technical details for the LoraTap 868 MHz Wireless Remote Control:
| විශේෂාංගය | විස්තර |
|---|---|
| ආදර්ශ අංකය | 2778ad15-60bd-43d9-b771-b8bacd83d6bc |
| වෙළඳ නාමය | ලෝරා ටැප් |
| මෙහෙයුම් සංඛ්යාතය | 868 MHz |
| බලශක්ති ප්රභවය | 1 x CR2 බැටරිය (ඇතුළත්) |
| මෙහෙයුම් වෙළුමtage | වෝල්ට් 3 |
| වත්මන් ශ්රේණිගත කිරීම | 1 A |
| මාරු වර්ගය | තල්ලු බොත්තම |
| මෙහෙයුම් ආකාරය | ON-OFF-ON |
| ද්රව්ය | ප්ලාස්ටික් |
| නිෂ්පාදන මානයන් (ආසන්න වශයෙන්) | 8.5 x 7.6 x 4.3 සෙ.මී. (පැකේජ මානයන්) |
| බර (ආසන්න වශයෙන්) | ග්රෑම් 60 (පැකේජයේ බර) |
| මුල් රට | චීනය |
8. වගකීම් සහ සහාය
For warranty information, technical support, or service inquiries, please contact LoraTap customer support through their official website or the retailer from whom you purchased the product. Please have your model number (2778ad15-60bd-43d9-b771-b8bacd83d6bc) and purchase details ready when contacting support.
