SAMOTECH SM308-2CH 2-Gang Zigbee Retractable Switch Module User Manual

1. හැඳින්වීම

The SAMOTECH SM308-2CH is a compact and powerful 2-gang Zigbee retractable switch module designed to integrate seamlessly into your smart home ecosystem. Based on the latest Zigbee 3.0 protocol, this module allows you to control two separate lighting circuits or electrical loads, offering advanced features such as active power and energy measurement. It is fully compatible with popular Zigbee gateways like Philips Hue, Home Assistant, HomeKit, SmartThings, and Hubitat, providing flexible control options for your connected devices.

Figure 1: SAMOTECH SM308-2CH 2-Gang Zigbee Retractable Switch Module

2. නිෂ්පාදන ලක්ෂණ

• සිග්බී 3.0 ප්‍රොටෝකෝලය: Utilizes the latest Zigbee 3.0 standard for reliable and secure communication.
• Dual Channel Output: Controls two independent circuits with a maximum load of 5.1A per channel.
• පුළුල් අනුකූලතාව: Fully compatible with Philips Hue, Home Assistant, HomeKit, SmartThings, Hubitat, and other Zigbee 3.0 gateways.
• ආධාරක පැටවීම: Supports both resistive and capacitive loads.
• Touchlink Commissioning: Supports Touchlink for easy pairing.
• Self-Forming Network: Capable of forming a Zigbee network without a coordinator and adding other devices.
• Power & Energy Measurement: Provides active power and energy consumption data.
• Find and Bind Mode: Supports linking with Zigbee remote controls.
• Universal Switch Control: Can be controlled by a universal single-wire push switch, with each channel controllable separately.

3 ආරක්ෂිත තොරතුරු

Please read this manual carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other injuries. Always consult a qualified electrician for installation if you are unsure.

• විදුලිය විසන්ධි කිරීම: Ensure the main power supply is turned OFF at the circuit breaker before any installation or wiring work.
• වෙළුමtagඊ ගැළපුම: Verify that the module's operating voltage (AC 100-240V, 50/60Hz) matches your electrical system.
• පැටවීමේ සීමාවන්: Do not exceed the maximum load ratings (Resistive: max. 5.1A/CH; Capacitive: max. 1.7A/CH) to prevent overheating and damage.
• ගෘහස්ථ භාවිතය පමණි: This device is designed for indoor use in dry environments. Avoid exposure to moisture or extreme temperatures.
• නිසි රැහැන්: Follow the wiring diagrams precisely. Incorrect wiring can cause malfunction or safety hazards.
• වාතාශ්රය: Ensure adequate ventilation around the module, especially if installed in confined spaces.

4. පැකේජ අන්තර්ගතය

• 1 x SAMOTECH SM308-2CH 2-Gang Zigbee Retractable Switch Module
• 1 x පරිශීලක අත්පොත (මෙම ලේඛනය)

5. පිරිවිතර

Figure 3: Dimensions of SM308-2CH Module

6. ස්ථාපනය සහ සැකසුම

6.1 රැහැන් සටහන

අවවාදයයි: Ensure power is OFF at the circuit breaker before proceeding with wiring. If you are not comfortable with electrical wiring, please consult a qualified electrician.

The SM308-2CH module has terminals for Line (L), Neutral (N), and two switch inputs (S1, S2) and two load outputs (L1, L2). Connect according to the diagram below:

Figure 2: Typical Wiring Diagram for SM308-2CH

• L: Live input from mains.
• N: Neutral input from mains.
• එල් 1: Switched Live output for Load 1.
• එල් 2: Switched Live output for Load 2.
• S1: Input for external switch 1 (connected to Live for control).
• S2: Input for external switch 2 (connected to Live for control).

6.2 Pairing with a Zigbee Gateway (e.g., Philips Hue)

Once the module is wired and power is restored, you can pair it with your Zigbee gateway:

1. Ensure your Zigbee gateway (e.g., Philips Hue Bridge) is powered on and connected to your network.
2. Open your Zigbee gateway's application (e.g., Philips Hue app).
3. Navigate to the "Add Device" or "Add Light" section within the app.
4. On the SM308-2CH module, locate the "Reset" button. Press the "Reset" button හතර වතාවක් quickly. The module's indicator light should start blinking, indicating it is in pairing mode.
5. The app should detect the new device. For the SM308-2CH, it will typically appear as two separate "lights" or switches, one for each channel.
6. Follow the on-screen prompts in your app to complete the pairing process and assign names to your new switches.

Note: For other Zigbee gateways (Home Assistant, SmartThings, Hubitat), the pairing process will be similar. Refer to your specific gateway's documentation for detailed instructions on adding new Zigbee devices.

6.3 Touchlink Commissioning

The module supports Touchlink for direct pairing with a Zigbee remote control without a gateway. To initiate Touchlink:

1. Bring the Zigbee remote control within 10 cm of the SM308-2CH module.
2. Initiate Touchlink on your remote control (refer to the remote's manual for specific instructions).
3. The module and remote should pair directly, allowing the remote to control the module's outputs.

7. මෙහෙයුම් උපදෙස්

Once installed and paired, the SAMOTECH SM308-2CH module can be operated in several ways:

• Via Zigbee Gateway App: Use your smart home app (e.g., Philips Hue, Home Assistant) to turn the connected lights or appliances ON/OFF for each channel independently.
• හඬ පාලනය: If integrated with a voice assistant (e.g., Siri via HomeKit, Google Assistant, Alexa), you can use voice commands to control the connected devices.
• External Wall Switch: If wired to traditional wall switches (S1, S2 terminals), you can use these physical switches to toggle the connected loads ON/OFF.
• Zigbee Remote Control: If paired via Touchlink or the gateway, a Zigbee remote can directly control the module.

7.1 Power and Energy Monitoring

The SM308-2CH module provides active power and energy consumption data. This information can typically be viewed within your Zigbee gateway's application, allowing you to monitor the energy usage of the connected devices.

8. නඩත්තු කිරීම

The SAMOTECH SM308-2CH module requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• පිරිසිදු කිරීම: Disconnect power before cleaning. Use a soft, dry cloth to wipe the module. Do not use liquid cleaners or aerosols.
• පරිසරය: Ensure the module is installed in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture.
• ස්ථිරාංග යාවත්කාලීන කිරීම්: Periodically check your Zigbee gateway's application for any available firmware updates for the module. Updates can improve performance and add new features.
• නිතිපතා චෙක්පත්: Occasionally inspect the wiring connections to ensure they are secure.

9. දෝශ නිරාකරණය

10. වගකීම් සහ සහාය

SAMOTECH products are designed for reliability and performance. For warranty information and technical support, please refer to the official SAMOTECH webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔබේ සිල්ලර වෙළෙන්දා අමතන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

වැඩිදුර සහාය සඳහා, ඔබට පිවිසිය හැක්කේ SAMOTECH store on Amazon නැතහොත් ඔවුන්ගේ පාරිභෝගික සේවය කෙලින්ම අමතන්න.