1. හැඳින්වීම
This manual provides detailed instructions for the installation, operation, and maintenance of your maXpeedingrods Rear Air Suspension Bags Kit. Designed to enhance stability, improve handling, and provide load-leveling capability for your Ford F-150 4WD (2004-2014), this kit ensures a safer and more comfortable ride when hauling or towing.
2 ආරක්ෂිත තොරතුරු
Important Pre-installation Notice:
- මෙම නිෂ්පාදනය ඔබේ වාහනයේ බර පැටවීමේ ධාරිතාව වැඩි නොකරයි.
- Do not exceed the manufacturer's recommended weight limit.
- The installation process may require drilling; professional installation is recommended to ensure personal safety.
- සියලුම වෙනස් කිරීම් සුදුසුකම් ලත් පුද්ගලයින් විසින් ස්ථාපනය කළ යුතු අතර ඔබේ දේශීය වෙනස් කිරීමේ රෙගුලාසි වලට අනුකූලව.
අවවාදයයි: පිළිකා සහ ප්රජනක හානි - www.P65Warnings.ca.gov
3. පැකේජ අන්තර්ගතය
ස්ථාපනය ආරම්භ කිරීමට පෙර සියලුම සංරචක පවතින බව තහවුරු කර ගන්න:
- 2x Air Spring Bags
- Upper Mounting Brackets (Driver & Passenger Side)
- පහළ සවිකරන වරහන්
- රෝල් තහඩු
- Air Line Tubing (5m)
- 2x Heat Shields
- Fastening Blocks
- ස්පේසර්ස්
- හෝස් Clamps
- All Necessary Hardware (bolts, nuts, washers, U-bolts, air fittings, zip ties)
- Installation Guide (Manual)
- maXpeedingrods Sticker
Image: All components included in the maXpeedingrods Rear Air Suspension Bags Kit.
Video: An unboxing video detailing the contents of the maXpeedingrods Air Suspension Kit.
4. පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| නිෂ්පාදකයා | මැක්ස්පීඩින්ග්රොඩ්ස් |
| ආදර්ශ අංකය | AMF150 |
| Vehicle Fit Type | Ford F-150 4WD (2004-2014) - Does NOT fit F-150 Raptor Models |
| අයිතමයේ බර | රාත්තල් 34 කි |
| නිෂ්පාදන මානයන් | අඟල් 17.28 x 14.61 x 8.31 |
| තනතුර | පසුපස |
| Load Leveling Capability | පවුම් 5,000 දක්වා |
| වායු පීඩන ගැලපීම | 5 සිට 100 දක්වා PSI |
| Rubber Thickness | 4-4.5 මි.මී |
| Internal Component | ජුන්ස් බම්පර් |
5. ස්ථාපන මාර්ගෝපදේශය
Follow these steps for proper installation of your air suspension kit. Professional installation is recommended.
5.1. පූර්ව ස්ථාපන පියවර
- Ensure the vehicle is parked on a level surface and the parking brake is engaged.
- Lift the rear of the vehicle using a jack and secure it with jack stands.
- පසුපස රෝද ඉවත් කරන්න.
- Locate and remove the factory jounce bumpers from the vehicle's frame.
5.2. Air Spring Assembly
- Place the lower mounting cup onto the lower bracket.
- Position an air spring onto the lower mounting cup.
- Attach the upper bracket to the top of the air spring, ensuring proper alignment.
- Secure the air spring to the brackets using the provided bolts and nuts.
- Install the air line fittings onto the air springs.
Video: Step-by-step guide on assembling the air springs with their brackets.
5.3. Vehicle Mounting
- Carefully position the assembled air spring and bracket onto the vehicle's leaf spring.
- Secure the lower bracket to the leaf spring using the provided U-bolts and hardware. Ensure all bolts are tightened securely.
- Attach the upper bracket to the vehicle's frame using the appropriate bolts and hardware.
- Connect the air lines to the air fittings on the air springs. Route the air lines to a convenient location for inflation, ensuring they are clear of moving parts and heat sources.
- Inflate the air springs to a minimum of 5 PSI using an air compressor or manual pump.
- Check all connections and air lines for leaks using a soapy water solution. Bubbles indicate a leak.
- Once confirmed leak-free, reinstall the rear wheels and lower the vehicle.
6. මෙහෙයුම් උපදෙස්
- වායු පීඩන ගැලපීම: The air springs are adjustable from 5 to 100 PSI. Adjust the pressure based on the load being carried and road conditions to achieve optimal ride height and comfort.
- පූරණය: Always add air pressure to the springs before adding a load to the vehicle. This prevents the springs from bottoming out and ensures proper load distribution.
- අවම පීඩනය: Maintain a minimum of 5 PSI in the airbags at all times, even when unloaded, to prevent damage to the air springs.
- Towing/Hauling: For heavy loads or towing, increase air pressure to level the vehicle, reduce squat, minimize trailer sway, and improve steering control and braking.
Image: Visual comparison of a truck's rear suspension before and after the air suspension kit is loaded, demonstrating load leveling.
7. නඩත්තු කිරීම
- නිතිපතා පීඩන පරීක්ෂාවන්: Check air pressure regularly, especially before and after hauling or towing, and adjust as necessary.
- සංරචක පරීක්ෂා කරන්න: Periodically inspect the air springs, air lines, and all mounting hardware for any signs of wear, damage, or corrosion.
- පිරිසිදුකම: Keep the air springs and surrounding components clean from dirt, debris, and road salt to prolong their lifespan.
8. දෝශ නිරාකරණය
- වාතය කාන්දු වීම: If you notice a loss of air pressure, check all air line connections and the air springs themselves for leaks using a soapy water solution. Tighten loose fittings or replace damaged components.
- අසමාන ගමන් උස: Adjust the air pressure in individual air springs to achieve a level ride. Ensure both sides are inflated to the appropriate pressure for the load.
- අඩු කළ කාර්ය සාධනය: Verify that the air pressure is within the recommended 5-100 PSI range. Inspect for any obstructions or damage to the air springs or mounting hardware.
9. වගකීම් සහ සහාය
maXpeedingrods උසස් තත්ත්වයේ නිෂ්පාදන සහ විශිෂ්ට පාරිභෝගික සේවාවක් සැපයීමට කැපවී සිටී.
- වගකීම්: A 12-month warranty is provided for quality issues, with replacement available within this period.
- පාරිභෝගික සහාය: 24/7 පාරිභෝගික සේවාව සහ සහාය භුක්ති විඳින්න.
- තාක්ෂණික සහාය: Lifetime technical support and customer service are available for all maXpeedingrods products.
