හැඳින්වීම
This manual provides instructions for the safe and proper assembly, operation, and maintenance of your StarTech Heavy Duty Dual Screen Rolling TV Stand (STNDMTVDUO). This mobile TV stand is designed to support two 37-60 inch VESA displays, with a maximum weight capacity of 110 lbs (50 kg) per display. It features heavy-duty aluminum construction, a sturdy steel base, lockable casters, and integrated cable management.
Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
ආරක්ෂිත තොරතුරු
- බර ධාරිතාව: Do not exceed the maximum weight capacity of 110 lbs (50 kg) per display. Exceeding this limit may result in instability and potential injury.
- සංදර්ශක ප්රමාණය: This stand is designed for 37-60 inch displays. Ensure your displays fit within this range and have compatible VESA mounting patterns.
- එකලස් කිරීම: Follow all assembly instructions carefully. Improper assembly can lead to product failure and injury. It is recommended to have at least two people for assembly and mounting displays.
- ස්ථාවරත්වය: Ensure the stand is placed on a stable, level surface. Always lock the casters when the stand is stationary to prevent accidental movement.
- චලනය: When moving the stand, unlock the casters and push slowly and carefully, especially over uneven surfaces. Avoid sudden stops or turns.
- කේබල් කළමනාකරණය: Properly route all cables through the integrated cable management system to prevent tripping hazards and cable damage.
- දරුවන්: Keep children away from the TV stand during assembly and operation. Do not allow children to climb on or play with the stand or attached displays.
පෙට්ටියේ ඇති දේ
Verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, contact StarTech support.
- 1 පදනම
- 4 කාස්ටර්
- 2 Universal plates
- 2 හැන්ඩ්ල්ස්
- 1 Column, left
- 1 Column, right
- 2 Adapter brackets, left
- 2 Adapter brackets, right
- 2 Top covers
- 2 සම්බන්ධක
- 1 DVD shelf
- 1 Connector plate
- 1 Camera shelf
- 2 Fixing plates
- 1 ආධාරක තීරුව
- 2 කුට්ටි
- 4 M6x15mm ඉස්කුරුප්පු
- 2 M6x25mm screws (button head)
- 2 M6x25mm ඉස්කුරුප්පු
- 3 M4x6mm screws (flat head)
- 2 M4x6mm ඉස්කුරුප්පු
- 2 M6x25mm screws (hex head)
- 10 M6x14mm ඉස්කුරුප්පු
- 8 M8x25mm ඉස්කුරුප්පු
- 2 M6x25mm screws (carriage)
- 2 ස්පේසර්
- 2 Washers (round)
- 1 හෙක්ස් යතුර
- 1 රැන්ච්
- 8 M5x14mm ඉස්කුරුප්පු
- 8 M6x14mm ඉස්කුරුප්පු
- 8 M6x30mm ඉස්කුරුප්පු
- 8 M8x30mm ඉස්කුරුප්පු
- 8 M8x50mm ඉස්කුරුප්පු
- 8 Washers (rectangular)
- 16 Spacers, small
- 16 Spacers, big
- 1 අත්පොත
Image: All components of the StarTech Dual Screen Rolling TV Stand laid out for assembly.
සැකසීම සහ එකලස් කිරීම
Follow these steps to assemble your dual screen rolling TV stand. It is recommended to perform assembly with at least two people due to the size and weight of the components.
- පාදමට වාත්තු යන්ත්ර අමුණන්න: Secure the four lockable casters to the sturdy steel base using the provided hardware. Ensure they are tightened securely.
- Assemble Columns: Connect the left and right columns to the base. These columns provide the vertical support for the displays and allow for height adjustment.
- Install Display Mounting Bar: Attach the horizontal display mounting bar to the top of the columns. This bar will hold the universal display plates.
- Mount Universal Plates: Secure the universal plates to the display mounting bar. These plates are compatible with various VESA patterns (200x200 to 600x400).
- Attach Media Shelves: Install the DVD shelf and camera shelf at your desired heights. The DVD shelf can be raised up to 28.3 inches (0.7m) from the floor, and the webcam shelf up to 93.5 inches (2.4m).
- මාර්ග කේබල්: Utilize the built-in cable management system within the columns to keep cables organized and hidden from view.
- Mount Displays: Carefully attach your 37-60 inch VESA compatible displays to the universal plates using the appropriate screws and spacers. Ensure the displays are securely fastened.
Image: Fully assembled StarTech Dual Screen Rolling TV Stand with two displays mounted.
Image: Detail of a lockable caster wheel, essential for securing the stand in place.
රූපය: View of the built-in cable management opening, designed to keep cables organized and out of sight.
වීඩියෝ: ඉවරයිview of the StarTech Dual Screen Rolling TV Stand (STNDMTVDUO) features and assembly process.
මෙහෙයුම් උපදෙස්
- සංදර්ශක උස සකස් කිරීම: The stand allows for a synchronized display height adjustment range of 19 inches (0.5m). The center of the TV can be adjusted from 47.2 inches (1.2m) to 66.4 inches (1.7m) from the floor. Use the height indicators on the columns for precise adjustment.
- Tilting Displays: Each display can be tilted +5 to -10 degrees to achieve the optimal viewing angle. Adjust the tilt mechanisms located on the universal plates.
- ස්ථාවරය චලනය කිරීම: To move the stand, ensure all four casters are unlocked. Use the attached handles to guide the stand. Always move the stand slowly and carefully.
- ස්ථාවරය සුරක්ෂිත කිරීම: Once the stand is in the desired position, engage the locks on all four casters to prevent unintended movement.
- රාක්ක සකස් කිරීම: ද webcam shelf and equipment shelf can be adjusted independently of each other and the displays. Loosen the securing knobs, adjust to the desired height, and re-tighten.
Image: Detail showing the height indicator for precise adjustment and an attached handle for easy movement.
Image: Close-up of the adjustable media shelf, capable of holding various equipment.
නඩත්තු කිරීම
- පිරිසිදු කිරීම: මෘදු, d රෙදි කඩකින් ස්ථාවරය පිරිසිදු කරන්න.amp රෙදි. නිමාවට හානි කළ හැකි උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවක වලින් වළකින්න.
- දෘඪාංග පරීක්ෂාව: සියලුම ඉස්කුරුප්පු සහ බෝල්ට් තදින් පවතින බව සහතික කර ගැනීම සඳහා වරින් වර පරීක්ෂා කරන්න. අවශ්ය නම් නැවත තද කරන්න.
- කැස්ටර් ක්රියාකාරීත්වය: Inspect casters for smooth operation and ensure the locking mechanism functions correctly. Clean any debris from the wheels.
- කේබල් කළමනාකරණය: Regularly check cables routed through the management system for any signs of wear or pinching.
දෝෂගවේෂණය
- Problem: Stand is difficult to move.
- විසඳුම: Ensure all four casters are unlocked. Check for any obstructions around the wheels. Clean any debris from the caster wheels.
- Problem: Displays are not level or stable.
- විසඳුම: Verify that all mounting screws securing the displays to the universal plates are tightened. Ensure the stand is on a level surface. Check that the height adjustment mechanisms are securely locked after adjustment.
- Problem: Cables are messy or getting caught.
- විසඳුම: Reroute cables through the integrated cable management channels in the columns. Use cable ties if necessary to bundle excess cable length.
පිරිවිතර
| වෙළඳ නාමය | ස්ටාර් ටෙක් |
| ආදර්ශ අංකය | STNDMTVDUO |
| අයිතමයේ බර | රාත්තල් 94.8 (කිලෝ ග්රෑම් 43) |
| නිෂ්පාදන මානයන් | 28 x 87.4 x 93.5 අඟල් (71.1 x 222 x 237.5 cm) |
| සවිකිරීමේ වර්ගය | මහල කන්ද |
| චලන වර්ගය | Tilt, Rolling |
| ද්රව්ය | මිශ්ර වානේ, ඇලුමිනියම් |
| ගැළපෙන උපාංග | Television (37-60 inch) |
| උපරිම ඇල කෝණය | 10 Degrees (+5/-10) |
| VESA අනුකූලතාව | 200x200, 200x300, 200x400, 300x200, 300x300, 400x200, 400x300, 400x400, 600x200, 600x300, 600x400 |
| Max Load Capacity (per display) | රාත්තල් 110 (කිලෝග්රෑම් 50) |
| Adjustable Height Range (TV center to floor) | 47.2" - 66.4" (1.2m - 1.7m) |
| Webcam Shelf Max Height | 93.5" (2.4m) from floor |
| Equipment Shelf Max Height | 28.3" (0.7m) from floor |
වගකීම් තොරතුරු
StarTech.com provides a comprehensive warranty for this product. For detailed information regarding the warranty period and terms, please refer to the warranty card included with your product or visit the official StarTech.com webඅඩවිය.
තාක්ෂණික සහාය
If you encounter any issues or have questions regarding the installation, operation, or maintenance of your StarTech Heavy Duty Dual Screen Rolling TV Stand, please contact StarTech.com technical support. Support contact information can be found on the official StarTech.com webවෙබ් අඩවියේ හෝ ඔබේ නිෂ්පාදනය සමඟ සපයා ඇති ලියකියවිලිවල.
