LASERLINER Rotary Laser Cubus G 210S පරිශීලක අත්පොත

1. හැඳින්වීම

This manual provides comprehensive instructions for the safe and effective operation, setup, and maintenance of your LASERLINER Cubus G 210S Rotary Laser. Please read this manual thoroughly before using the device and keep it for future reference.

The LASERLINER Cubus G 210S is a fully automatic rotary laser designed for precise leveling tasks in construction and excavation. It features green laser technology for enhanced visibility and offers various operating modes including point, scan, rotation, and hand receiver mode. It also supports manual slope setting and remote control operation.

2. පැකේජ අන්තර්ගතය

පහත ලැයිස්තුගත කර ඇති සියලුම අයිතම ඔබේ පැකේජයේ ඇති බවට වග බලා ගන්න:

• Cubus G Rotary Laser
• SensoLite G 210 Laser Receiver
• Lightweight Tripod 150 cm
• Tripod/Wall Mount
• විශ්ව කන්ද
• දුරස්ථ පාලකය
• බැටරි
• රැගෙන යන පටිය
• Power Supply/Charger (with international adapters)
• Telescopic Leveling Rod 4m
• රැගෙන යන නඩුව

Figure 2.1: Complete package contents of the LASERLINER Cubus G 210S Rotary Laser system.

3. ආරක්ෂිත උපදෙස්

Always adhere to the following safety guidelines to prevent injury and damage to the device:

• ලේසර් විකිරණ: Do not stare into the laser beam. Avoid direct eye exposure.
• මෙහෙයුම් පරිසරය: Use the device in well-ventilated areas. Avoid dusty or humid conditions.
• බැටරි ආරක්ෂාව: Use only recommended batteries. Do not mix old and new batteries. Dispose of batteries properly.
• නඩත්තු: Do not attempt to modify or repair the device yourself. Refer to qualified service personnel.
• ස්ථාවරත්වය: Ensure the tripod and laser are stable on a level surface before operation to prevent tipping.
• ස්වයංක්‍රීය වසා දැමීම: The device features an automatic shutdown function in case of external interference to prevent incorrect measurements.

4. පිහිටුවීම

4.1 බැටරි ස්ථාපනය

Insert the provided batteries into the Cubus G rotary laser and the SensoLite G 210 receiver according to the polarity indicators. Ensure the battery compartment covers are securely closed.

4.2 Assembling the Tripod and Mounting the Laser

1. Extend the legs of the lightweight tripod to the desired height and secure them.
2. Place the Cubus G rotary laser onto the tripod's mounting plate.
3. Secure the laser to the tripod using the 5/8" thread connection. Ensure it is firmly attached and level.

Figure 4.1: The Cubus G 210S rotary laser securely mounted on the lightweight tripod.

4.3 Setting up the Leveling Rod

Assemble the telescopic leveling rod. The rod features clear markings for precise height measurements. Adjust the sections to the required length and secure them.

Figure 4.2: Adjusting the telescopic leveling rod for accurate measurements.

රූපය 4.3: සවිස්තරාත්මක view of the leveling rod's millimeter scale for precise readings.

5. මෙහෙයුම් උපදෙස්

5.1 Powering On and Self-Leveling

Press the power button on the Cubus G. The device will automatically self-level. The green laser technology provides excellent visibility for various applications.

Figure 5.1: The Cubus G 210S features Sensor Automatic and Auto Slope for precise leveling.

5.2 මෙහෙයුම් ආකාර

The Cubus G 210S supports several operating modes:

• භ්‍රමණ ප්‍රකාරය: The laser rotates to create a continuous horizontal or vertical plane.
• ස්කෑන් මාදිලිය: Creates a visible laser line in a specific adjustable angle.
• ලක්ෂ්‍ය ප්‍රකාරය: Projects a stationary laser point.
• Hand Receiver Mode: For use with the SensoLite G 210 laser receiver for extended range and outdoor applications.

Figure 5.2: The Cubus G 210S can project a precise 90-degree reference beam for alignment tasks.

5.3 Using the SensoLite G 210 Laser Receiver

For outdoor use or when the laser beam is not visible, use the SensoLite G 210 laser receiver. The receiver detects the laser beam up to a diameter of 200 meters. It provides visual and audible signals to indicate the laser's position.

Figure 5.3: The SensoLite G 210 receiver extends the working range to 200 meters for outdoor use.

Figure 5.4: The SensoLite G 210 offers fast detection of the laser beam for efficient work.

5.4 Manual Slope Setting

The Cubus G 210S allows for manual setting of slopes. Refer to the device's interface or remote control for specific instructions on adjusting the tilt angle.

5.5 දුරස්ථ පාලක මෙහෙයුම

The included remote control allows for convenient operation of all functions up to a maximum distance of 30 meters. This includes changing modes, adjusting scan angles, and activating specific features.

5.6 Tilt Warning Function (ADS Tilt)

The device is equipped with an ADS Tilt warning function. In case of external interference or significant movement, the laser will automatically shut down to prevent incorrect measurements. This ensures accuracy and reliability during operation.

Figure 5.5: The ADS Tilt function automatically stops operation if the device is disturbed, preventing measurement errors.

6. නඩත්තු කිරීම

• පිරිසිදු කිරීම: මෘදු, ඩී භාවිතා කරන්නamp උපාංගය පිරිසිදු කිරීමට රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්‍රාවක භාවිතා නොකරන්න.
• ගබඩා: Store the device and accessories in the provided carrying case in a dry, cool place when not in use.
• බැටරි සත්කාර: කාන්දු වීම වැළැක්වීම සඳහා උපාංගය දිගු කාලයක් භාවිතා නොකරන්නේ නම් බැටරි ඉවත් කරන්න.
• ක්රමාංකනය: Regular calibration by authorized service centers is recommended to maintain accuracy.

7. දෝශ නිරාකරණය

8. පිරිවිතර

9. වගකීම් සහ සහාය

For warranty information and technical support, please refer to the official Laserliner webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔබේ ප්‍රාදේශීය බෙදාහරින්නා අමතන්න. ඕනෑම වගකීම් හිමිකම් සඳහා මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.