නිෂ්පාදනය අවසන්view
The VECTOR SS6LV is a compact and powerful 1200 peak amp lithium jump starter designed to instantly start cars and trucks with up to 8-cylinder engines. Beyond its primary function, it serves as a versatile portable power bank, featuring USB-A (2.1 Amps) and USB-C (3.1 Amps) ports for charging various electronic devices. It also includes an integrated LED work light for convenience in low-light conditions. The unit is equipped with a Smart Controller for safe operation, providing reverse polarity protection, and comes with heavy-duty powder-coated clamps.
Image: The VECTOR SS6LV jump starter with its attached heavy-duty clamps, පෙන්වන්නasing එහි සංයුක්ත නිර්මාණය.
පෙට්ටියේ ඇති දේ
පැකේජය විවෘත කිරීමෙන් පසු, ඔබට පහත සඳහන් සංරචක සොයාගත හැකිය:
- VECTOR SS6LV ලිතියම් පැනීමේ ආරම්භක ඒකකය
- Smart Controller with Heavy Duty Powder Coated Clamps
- AC ආරෝපණ ඇඩැප්ටරය
- DC (Car) Charging Adapter
- USB ආරෝපණ කේබලය
Image: All components included in the VECTOR SS6LV product box.
නිෂ්පාදන විශේෂාංග
- පැනීමේ ආරම්භකය: Delivers 1200 peak amps, capable of jump starting vehicles with up to 8-cylinder engines.
- USB චාජර්: Equipped with USB-A (2.1 Amps) and USB-C (3.1 Amps) ports to charge and power various electronic devices such as phones, tablets, and laptops.
- නැවත ආරෝපණය කළ හැකි ලිතියම් බැටරි: Internal lithium-ion battery can be recharged using the included AC, DC, or USB adapters.
- ආරක්ෂිත මෙහෙයුම: Features an Engine Start Smart Controller with reverse polarity protection, ensuring correct and safe connection of jumper cables.
- අතේ ගෙන යා හැකි නිර්මාණය: Compact and lightweight, making it easy to store and transport for on-the-go power needs.
- LED වැඩ ආලෝකය: Integrated bright LED light provides illumination for nighttime or low-light situations.
රූපය: විස්තරාත්මක view of the VECTOR SS6LV unit with key features labeled.
සැලසුම
මූලික ආරෝපණය
Before first use, fully charge the VECTOR SS6LV unit. It is recommended to fully charge the unit every 3 to 6 months to maintain optimal battery health, even if not in use.
- Connect the USB Charging Cable to the unit's USB-C port.
- Connect the other end of the USB Charging Cable to either the AC Charging Adapter (for wall outlet) or the DC Charging Adapter (for vehicle 12V accessory outlet).
- Plug the chosen adapter into its respective power source. The battery indicator lights on the unit will illuminate to show charging progress.
- Charging is complete when all indicator lights are solid blue.
Connecting for Jump Start
Ensure the vehicle's ignition is off before connecting the jump starter.
- Locate the battery terminals in your vehicle. The positive terminal is usually marked with a "+" sign and covered by a red cap. The negative terminal is marked with a "-" sign.
- රතු (ධනාත්මක) cl සම්බන්ධ කරන්නamp of the Smart Controller to the positive (+) terminal of the vehicle's battery.
- කළු (සෘණ) cl සම්බන්ධ කරන්නamp of the Smart Controller to a clean, unpainted metal part of the vehicle's chassis or engine block, away from the battery and moving parts. Alternatively, connect to the negative (-) terminal of the battery if safe to do so.
- Plug the Smart Controller cable into the "ENGINE START" port on the VECTOR SS6LV unit. The Smart Controller will indicate readiness (e.g., a solid green light).
Image: The jump starter connected to a vehicle battery, ready for use.
ක්රියාත්මක වෙනවා
වාහනයක් ආරම්භ කරමින් පැනීම
- Ensure the VECTOR SS6LV unit is fully charged and properly connected to the vehicle's battery as described in the "Setup" section.
- Once the Smart Controller indicates readiness (e.g., solid green light), attempt to start the vehicle's engine. Do not crank for more than 5 seconds.
- If the vehicle does not start, wait at least 30 seconds before attempting again. Do not exceed three consecutive jump start attempts.
- Once the vehicle starts, immediately disconnect the Smart Controller from the VECTOR SS6LV unit, then disconnect the black (negative) clamp, ඉන්පසු රතු (ධන) clamp from the vehicle battery.
බලශක්ති බැංකුවක් ලෙස භාවිතා කිරීම
The VECTOR SS6LV can charge various electronic devices.
- Connect your device's USB charging cable to either the USB-A (2.1 Amps) or USB-C (3.1 Amps) port on the side of the VECTOR SS6LV unit.
- Press the power button on the unit to begin charging. The indicator lights will show the remaining battery level.
Image: The jump starter unit actively charging a smartphone.
LED වැඩ ආලෝකය භාවිතා කිරීම
The integrated LED work light provides illumination for various tasks.
- To turn on the LED work light, press and hold the power button for approximately 3 seconds.
- To cycle through light modes (solid, strobe, SOS), briefly press the power button.
- To turn off the LED work light, press and hold the power button again for approximately 3 seconds.
Image: The bright LED work light on the end of the unit.
නඩත්තු කිරීම
ඒකකය නැවත ආරෝපණය කිරීම
To ensure the longevity and readiness of your VECTOR SS6LV, it is crucial to maintain its charge. Recharge the unit after each use, and at least every 3 to 6 months, even if it has not been used. This prevents deep discharge and prolongs battery life.
ගබඩා කිරීම
Store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children. Ensure the rubber covers for the ports are securely closed to protect against dust and moisture.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| ඒකකය සක්රිය නොවේ. | බැටරි සම්පූර්ණයෙන්ම විසර්ජනය වේ. | Recharge the unit using the provided AC or DC adapters. |
| වාහනය ජම්ප් ස්ටාර්ට් නොකරයි. | වැරදි clamp connection; vehicle battery is severely damaged; vehicle engine is too large for the unit's capacity. | cl සහතික කරන්නamps are connected correctly (red to positive, black to chassis/negative). Check Smart Controller indicator. Consult a mechanic if battery is damaged. Confirm vehicle engine size is within the unit's specifications (up to 8-cylinders). |
| Smart Controller shows error. | Reverse polarity connection; short circuit; over-temperature. | cl විසන්ධි කරන්නamps and re-connect correctly. Ensure clamps do not touch each other. Allow unit to cool down if it has been used extensively. |
| Devices not charging via USB. | Unit is off; USB cable is faulty; device is not compatible. | Press the power button to activate USB output. Try a different USB cable. Ensure your device is compatible with standard USB charging. |
පිරිවිතර
- වෙළඳ නාමය: දෛශිකය
- ආදර්ශ අංකය: SS6LV
- නිෂ්පාදන මානයන්: 3"D x 1"W x 7"H
- අයිතමයේ බර: අවුන්ස 13.8 කි
- Ampකෝපය: 1200 Amps
- උපරිම ප්රතිදාන ධාරාව: 1200 Amps
- බැටරි වර්ගය: ලිතියම් අයන (1ක් අවශ්යයි, ඇතුළුව)
- USB-A ප්රතිදානය: 2.1 Amps
- USB-C ප්රතිදානය: 3.1 Amps
- නිෂ්පාදකයා: බැකස් ග්ලෝබල් එල්එල්සී
- මුල් රට: චීනය
ආරක්ෂිත තොරතුරු
අවවාදයයි: මෙම නිෂ්පාදනය මඟින් කැලිෆෝනියා ප්රාන්තය පිළිකා හා උපත් ආබාධ හෝ වෙනත් ප්රජනන හානියක් ඇති කරන බව දන්නා ඊයම් සහ ඊයම් සංයෝග ඇතුළු රසායනික ද්රව්ය වලට ඔබව නිරාවරණය කළ හැකිය. වැඩි විස්තර සඳහා යන්න www.P65Warnings.ca.gov.
Always refer to the full user manual for complete safety instructions and warnings before operating this device.
නිල නිෂ්පාදන වීඩියෝව
Watch this official video from VECTOR to understand the key differences between battery chargers and jump starters, and how the VECTOR SS6LV functions.
Video: "VECTOR - Charger vs Jumper" - This video explains the distinction between battery chargers and jump starters, highlighting the immediate boost provided by a jump starter like the SS6LV.
