Mercusys ME20 AC750 Wi-Fi පරාසයේ විස්තාරක පරිශීලක අත්පොත

1. හැඳින්වීම

This manual provides instructions for setting up, operating, and maintaining your Mercusys ME20 AC750 Wi-Fi Range Extender. The ME20 is designed to expand your existing Wi-Fi network coverage, eliminating dead zones and providing stable, fast dual-band Wi-Fi to areas previously unreachable by your main router.

2. නිෂ්පාදන අවසන්view

2.1 පැකේජයේ අන්තර්ගතය

• Mercusys ME20 AC750 Wi-Fi Range Extender
• Quick Installation Guide (this manual)

2.2 භෞතික පෙනුම

The Mercusys ME20 is a compact, wall-plug design. It features a signal indicator LED, a WPS/Reset button, and an Ethernet port.

රූපය 2.2.1: ඉදිරිපස view of the Mercusys ME20 Wi-Fi Range Extender. The device is white with the MERCUSYS logo and a green signal indicator light at the bottom.

රූපය 2.2.2: පැත්ත view of the Mercusys ME20, showing the integrated power plug, an Ethernet port, and the WPS/Reset button. The device has ventilation holes along its side.

2.3 LED දර්ශකය

• ඝන කොළ: Excellent connection to the host router.
• ඝන තැඹිලි: Good connection to the host router.
• ඝන රතු: Poor connection to the host router.
• අක්රිය: No connection or device is off.

2.4 බොත්තම් සහ වරායන්

• WPS/නැවත පිහිටුවීමේ බොත්තම: Press briefly to initiate WPS setup. Press and hold for 5 seconds to reset the extender to factory defaults.
• Ethernet Port (10/100 Mbps): Used for wired connections to devices like PCs, IPTVs, or game consoles.

3. පිහිටුවීම

There are two methods to set up your Mercusys ME20 range extender: using the WPS button or via a web බ්රවුසරය.

3.1 Method 1: Using the WPS Button (Recommended)

1. බල ගැන්වීම: Plug the extender into an electrical outlet near your host router. Wait for the LED to turn solid red.
2. රවුටරයේ WPS ඔබන්න: ඔබේ සත්කාරක රවුටරයේ WPS බොත්තම ඔබන්න.
3. Extender එකේ WPS ඔබන්න: Within two minutes, press the WPS/Reset button on your ME20 extender.
4. Observe LED: The LED on the extender will flash and then turn solid green or orange, indicating a successful connection.
5. විස්තාරකය නැවත ස්ථානගත කරන්න: Unplug the extender and move it to a location between your router and the Wi-Fi dead zone. Choose a spot where the LED is solid green or orange.

රූපය 3.1.1: The Mercusys ME20 extender plugged into a standard wall socket, ready for setup. The device is compact and does not obstruct adjacent outlets.

රූපය 3.1.2: The Mercusys ME20 extender positioned in a wall outlet, demonstrating its discreet integration into a home setting. The signal indicator light is visible.

3.2 ක්රමය 2: a හරහා Web බ්රවුසරය

1. බල ගැන්වීම: Plug the extender into an electrical outlet near your host router. Wait for the LED to turn solid red.
2. විස්තාරකයට සම්බන්ධ වන්න: On your computer or smartphone, connect to the Wi-Fi network named "MERCUSYS_EXTENDER" (or similar, check the label on the extender). No password is required.
3. ප්රවේශය Web අතුරු මුහුණත: a විවෘත කරන්න web බ්රවුසරය සහ වර්ගය mwlogin.net or the IP address (usually 192.168.1.1) into the address bar.
4. පිවිසුම් මුරපදය සාදන්න: Create a new login password for the extender's management page.
5. සත්කාරක ජාලය තෝරන්න: Follow the on-screen instructions to select your host Wi-Fi network and enter its password.
6. විස්තාරකය නැවත ස්ථානගත කරන්න: Unplug the extender and move it to a location between your router and the Wi-Fi dead zone. Choose a spot where the LED is solid green or orange.

සටහන: If the LED is red after relocation, move the extender closer to the host router.

4. මෙහෙයුම් උපදෙස්

4.1 සම්බන්ධක උපාංග

Once the extender is successfully set up, devices can connect to the extended Wi-Fi network using the same network name (SSID) and password as your main router, or a new SSID if you configured one during setup.

• රැහැන් රහිත උපාංග: Connect smartphones, tablets, laptops, and other Wi-Fi enabled devices to the extended network.
• රැහැන්ගත උපාංග: Use an Ethernet cable to connect devices like smart TVs, game consoles, or desktop PCs to the extender's Ethernet port for a stable wired connection.

4.2 Understanding the Signal Indicator

The multicolor LED on the front of the extender helps you determine the optimal placement for the best Wi-Fi extension.

• ඝන කොළ: Indicates a strong signal from the host router. This is the ideal placement.
• ඝන තැඹිලි: Indicates a moderate signal from the host router. The extender is functioning, but a stronger signal might be achievable by adjusting its position.
• ඝන රතු: Indicates a weak signal from the host router. Move the extender closer to your host router.

5. නඩත්තු කිරීම

5.1 සාමාන්‍ය රැකවරණය

• Keep the device in a dry environment, away from water and excessive humidity.
• උපාංගය අධික උෂ්ණත්වයට නිරාවරණය කිරීමෙන් වළකින්න.
• Ensure proper ventilation; do not block the ventilation holes.
• මෘදු වියළි රෙද්දකින් උපාංගය පිරිසිදු කරන්න. දියර පිරිසිදු කරන්නන් හෝ එයරෙසෝල් භාවිතා නොකරන්න.

5.2 ස්ථිරාංග යාවත්කාලීන කිරීම්

Periodically check the Mercusys official website for firmware updates. Updating the firmware can improve performance, add new features, and fix bugs. Refer to the Mercusys support page for specific instructions on how to update your ME20's firmware.

6. දෝශ නිරාකරණය

6.1 No Internet Access After Connecting to Extender

• Check Host Router: Ensure your main router has internet access.
• විස්තාරක ස්ථානගත කිරීම: Verify the extender's LED is solid green or orange. If red, relocate it closer to the host router.
• නැවත ආරම්භ කරන්න: Try rebooting both your host router and the extender.
• නැවත සකස් කරන්න: ගැටළු පවතින්නේ නම්, WPS බොත්තම භාවිතයෙන් විස්තාරකය නැවත වින්‍යාස කිරීමට උත්සාහ කරන්න හෝ web බ්‍රව්සර් ක්‍රමය.

6.2 Slow Speed on Extended Network

• විස්තාරක ස්ථානගත කිරීම: The extender might be too far from the host router. Relocate it to a position where the LED is solid green.
• බාධා කිරීම්: Reduce interference from other electronic devices (e.g., microwaves, cordless phones) by moving the extender or the interfering devices.
• ජාල තදබදය: Too many devices on the network can cause slowdowns.

6.3 How to Reset the Extender

To restore the extender to factory default settings, press and hold the WPS/Reset button for approximately 5 seconds until the LED flashes rapidly. Release the button and wait for the extender to restart.

7. පිරිවිතර

8. වගකීම් සහ සහාය

For warranty information, technical support, and further assistance, please visit the official Mercusys webවෙබ් අඩවිය. ඔබට එහි නිතර අසන ප්‍රශ්න, ධාවක බාගැනීම් සහ පාරිභෝගික සේවා සඳහා සම්බන්ධතා තොරතුරු සොයාගත හැකිය.

Mercusys Official Webඅඩවිය: www.mercusys.com