හැඳින්වීම
This manual provides essential information for the safe and efficient operation of your Einhell GE-ST 36/40 Li E-Solo Power X-Change Cordless Snow Blower. Please read these instructions carefully before use and retain them for future reference. This device is designed for clearing snow from paths and driveways.
ආරක්ෂිත තොරතුරු
අවවාදයයි: Always prioritize safety when operating power tools. Failure to follow these instructions may result in serious injury.
- Protect your hands and eyes during use. Wear appropriate safety gloves and eye protection.
- Utilize the two-point safety switch to prevent accidental starting of the device.
- Ensure the device is placed stably on a flat surface when not in operation to prevent it from falling.
- අවට සිටින අය, විශේෂයෙන් ළමයින් සහ සුරතල් සතුන්, මෙහෙයුම් ප්රදේශයෙන් ඈත් කර තබන්න.
- Do not operate the snow blower under the influence of drugs, alcohol, or medication.
- Inspect the work area for objects that could be thrown by the snow blower.
නිෂ්පාදනය අවසන්view
The Einhell GE-ST 36/40 Li E-Solo is a cordless snow blower designed for efficient snow removal. It is part of the Power X-Change battery system.
ප්රධාන ලක්ෂණ:
- පවර් එක්ස්-වෙනස් කිරීමේ පද්ධතිය: Compatible with Einhell Power X-Change batteries and chargers.
- බුරුසු රහිත මෝටර්: Features an Einhell PurePOWER brushless motor for enhanced performance and extended runtime.
- Adjustable Snow Ejection: The direction of snow ejection can be adjusted via a control lever.
- වේග පාලනය: Variable speed control allows adjustment to different snow conditions.
- බැටරි ආරක්ෂණය: A magnetic battery cover protects batteries from snow and moisture.
- Ergonomic Design: Additional handle and soft grip for comfortable two-handed operation.
- සංයුක්ත ගබඩාව: Self-standing design with a separable guide rail for easy storage.
Image 1: The Einhell GE-ST 36/40 Li E-Solo Cordless Snow Blower in operation, demonstrating snow clearing.
සැලසුම
- ඇසිරීම: ඇසුරුම්කරණයෙන් සියලුම සංරචක ප්රවේශමෙන් ඉවත් කරන්න. සියලුම කොටස් පවතින බවත් හානි නොවන බවත් සහතික කර ගන්න.
- හැසිරවීම එකලස් කිරීම: Attach the additional handle to the main unit. Secure it firmly according to the diagrams in the separate assembly guide (if provided). Ensure the guide rail is correctly assembled and secured.
- බැටරි ස්ථාපනය: The device requires 2 x 18 Volt Power X-Change batteries for operation. For optimal results, 4.0 Ah batteries or larger are recommended.
- Open the battery cover, which features a magnetic closure.
- Insert the charged batteries into their respective slots.
- Close the battery cover securely to protect the batteries from snow and moisture.
- මූලික පරීක්ෂාව: Before first use, check all connections and fasteners to ensure they are tight and secure. Verify that the snow ejection chute moves freely.
මෙහෙයුම් උපදෙස්
- හිම පිඹින්නෙකු ආරම්භ කිරීම:
- Ensure batteries are fully charged and correctly installed.
- Engage the two-point safety switch.
- Press the main power switch to start the motor.
- Adjusting Snow Ejection Direction: Use the control lever to direct the snow ejection to the left, right, or straight ahead. Adjust as needed to avoid throwing snow onto unwanted areas.
- සීරුමාරු වේගය: The speed control allows you to match the blower's power to the snow conditions. Use a lower speed for light, powdery snow and a higher speed for heavier, wet snow.
- හිම ඉවත් කිරීම:
- Push the snow blower forward at a steady pace.
- Avoid forcing the machine through deep snow. Take smaller passes if necessary.
- The maximum recommended snow depth is 20 cm (approximately 8 inches).
- The working width is 40 cm (approximately 15.7 inches).
- හිම පිඹින්නා නැවැත්වීම: Release the main power switch and the two-point safety switch. The motor will stop.
නඩත්තු කිරීම
නිතිපතා නඩත්තු කිරීම ඔබේ හිම පිඹින යන්ත්රයේ ආයු කාලය සහ ප්රශස්ත ක්රියාකාරිත්වය සහතික කරයි.
- පිරිසිදු කිරීම: After each use, remove any snow, ice, or debris from the housing, auger, and ejection chute. Use a soft brush or cloth. Do not use high-pressure water.
- බැටරි සත්කාර:
- Always remove batteries from the device before cleaning or storage.
- කාමර උෂ්ණත්වයේ දී වියළි ස්ථානයක බැටරි ගබඩා කරන්න.
- දිගුකාලීන ගබඩා කිරීමට පෙර බැටරි සම්පූර්ණයෙන්ම ආරෝපණය කරන්න.
- පරීක්ෂාව: Periodically check for loose screws, damaged parts, or excessive wear on the auger blades. Replace worn or damaged parts with genuine Einhell spare parts.
- ගබඩා: Store the snow blower in a dry, protected area. The separable guide rail allows for compact storage.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| හිම පිඹින යන්ත්රය ආරම්භ නොවේ. |
|
|
| Reduced snow ejection distance. |
|
|
| අසාමාන්ය ශබ්දය හෝ කම්පනය. |
|
|
If problems persist after attempting these solutions, contact Einhell customer support.
පිරිවිතර
- වෙළඳ නාමය: අයින්හෙල්
- ආදර්ශ අංකය: 3417011
- බලශක්ති ප්රභවය: Battery Powered (Power X-Change System)
- වෙළුමtage: 36 V (requires 2 x 18 V batteries)
- එන්ජින් වර්ගය: බුරුසු රහිත මෝටරය
- වැඩ කරන පළල: 40 cm (අඟල් 15.7)
- Max. Snow Depth: 20 cm (අඟල් 7.9)
- අයිතමයේ බර: 6.41 kg (රාත්තල් 14.1)
- නිෂ්පාදන මානයන් (L x W x H): 17.72"D x 12.2"W x 58.07"H
- වර්ණය: රතු/කළු
වගකීම් සහතිකය
Einhell provides a 10-year warranty on the PurePOWER brushless motor after online registration. For specific warranty terms and conditions for the entire product, please refer to the warranty card included with your purchase or visit the official Einhell webඅඩවිය.
සහාය
For technical assistance, spare parts, or further information, please contact Einhell customer service or visit their official website. Keep your model number (3417011) and purchase details ready when contacting support.
අයින්හෙල් නිල Webඅඩවිය: www.einhell.com
