Linkind SP4-Warm White Solar Pathway Lights - 8 Pack User Manual

1. හැඳින්වීම

Thank you for choosing Linkind Solar Pathway Lights. These solar-powered lights are designed to illuminate and enhance your outdoor spaces such as gardens, walkways, yards, patios, and driveways. Featuring automatic on/off functionality, adjustable height options, and a durable waterproof design, these lights offer a convenient and energy-efficient lighting solution.

රූපය 1: අවසන්view of Linkind Solar Pathway Lights highlighting key features.

2. නිෂ්පාදන සංරචක

Each Linkind Solar Pathway Light unit consists of the following parts:

• Light Head: Contains the solar panel, LED light source, and control button.
• Extension Poles: Two modular pole sections for adjustable height.
• බිම් කොටස්: Pointed stake for secure installation into the ground.

රූපය 2: විසුරුවා හරින ලදී view of a single Linkind Solar Pathway Light unit.

3. පිහිටුවීම සහ ස්ථාපනය

Follow these steps to assemble and install your solar pathway lights:

1. ආලෝකය එකලස් කරන්න: Connect the desired number of extension poles to the light head and then attach the ground stake to the bottom. You can choose from four different height combinations based on your preference and the installation area.
2. ආලෝකය සක්රිය කරන්න: Locate the red power button on the underside of the solar panel. Press the button once to activate the default low light mode.
3. මූලික ආරෝපණය: Place the assembled lights in direct sunlight for 1-2 days to ensure a full initial charge. This allows the internal battery to reach its maximum capacity before first use.
4. භූමියේ ස්ථාපනය කරන්න: Insert the ground stake vertically into soft soil in your desired location. Ensure the solar panel is exposed to direct sunlight for optimal charging.

Figure 3: Illustration of various height options for assembly.

ස්ථාපන වීඩියෝ මාර්ගෝපදේශය

වීඩියෝව 1: විස්තරාත්මකවview, installation, and light demonstration of Linkind Solar Pathway Lights.

4. මෙහෙයුම් උපදෙස්

The Linkind Solar Pathway Lights are designed for ease of use with automatic functionality and multiple lighting modes.

• ස්වයංක්‍රීය සක්‍රිය/අක්‍රිය: The lights feature a light sensor that automatically turns them on at dusk and off at dawn, provided they are in an active lighting mode.
• ආලෝකකරණ මාදිලි වෙනස් කිරීම: Use the red power button on the light head to cycle through the available modes:
• 1x ඔබන්න: Low Light Mode (lasts up to 12 hours on a full charge).
• 2x ඔබන්න: High Light Mode (lasts up to 6 hours on a full charge).
• 3x ඔබන්න: Gradual Breathing Mode (light slowly dims and brightens, lasts up to 12 hours).
• 4x ඔබන්න: Off (turns the light off completely).

Figure 4: Visual representation of the three lighting modes and their durations.

Figure 5: Automatic charging during the day and lighting at night.

5. නඩත්තු කිරීම

To ensure optimal performance and longevity of your Linkind Solar Pathway Lights, follow these maintenance guidelines:

• පිරිසිදු කිරීම: නිතිපතා සූර්ය පැනලය මෘදු, d රෙදි කඩකින් පිස දමන්න.amp දූවිලි, අපිරිසිදුකම් හෝ සුන්බුන් ඉවත් කිරීමට රෙදි. පිරිසිදු සූර්ය පැනලයක් කාර්යක්ෂම ආරෝපණය සහතික කරයි.
• ස්ථානගත කිරීම: Ensure the lights are placed in an area that receives at least 6-8 hours of direct sunlight daily. Avoid shaded areas.
• කාලගුණ ප්රතිරෝධය: The lights are IP65 waterproof, providing excellent resistance against rain and other weather conditions. However, prolonged submersion is not recommended.

Figure 6: The lights are designed to be waterproof for outdoor use.

6. දෝශ නිරාකරණය

If your solar pathway lights are not functioning as expected, consider the following:

• ආලෝකය ක්‍රියාත්මක නොවේ: Ensure the light is in an active mode (not 'Off'). Press the red button to cycle through modes. Verify the solar panel is receiving sufficient direct sunlight.
• කෙටි ආලෝක කාලය: Make sure the solar panel is clean and free from obstructions. Relocate the light to an area with more direct sunlight if necessary.
• අඳුරු ආලෝක ප්‍රතිදානය: Allow 1-2 full days of charging in direct sunlight for the battery to reach full capacity.

7. පිරිවිතර

Figure 7: Key lighting specifications: 3000K warm light and 200 lumens brightness.

8. වගකීම් සහ සහාය

For warranty information, technical support, or any product-related inquiries, please refer to the documentation included with your purchase or contact Linkind customer service directly. Contact details are typically provided in the product packaging or on the official Linkind webඅඩවිය.